电解电容器铝箔纯交流腐蚀工艺影响因素的研究

对电解电容器铝箔交流腐蚀体系中各影响因素的研究结果表明，在电流密度为０．５Ａ／ｃｍ２，温度为４７±２℃；控制腐蚀液中Ａｌ（３＋）含量及适量添加表面保护剂和辅助添加剂的条件下，可获得最大比电容。通过循环伏安曲线测试，探讨了各因素影响腐蚀的机理及相互关系。     

Unique microstructure and property of a 2024 aluminum alloy subjected to upsetting extrusion multiple processing

The microstructure and hardness of a 2024 aluminum alloy subjected to multi-pass upsetting extrusion at ambient temperature were studied. Experimental results indicated that with the number of upsetting extrusion passes increasing, the grains of the alloy are gradually refined and the hardness increases correspondingly. After ten passes of upsetting extrusion processing, the grain size decreases to less than 200 nm in diameter and the sample maintains its original shape, while the hardness is double owing to equal-axial ultrafine grains and work hardening effect caused by large plastic deformation.     

Extraction-chromatographic Separation of Microamount Scandium(Ⅲ)with HEH(EHP) Resin and Its Analytical Application

The optimum conditions for the extraction-chromatography by using 2-ethylhexyl-2-ethylhexyl-phosphonate resin to separate scandium(Ⅲ)from large amounts of other metal ions were reported.A me-thod for the separation and determination of microamount of scandium has been developed.This methodgives higher accuracy and reproducibility than solvent extraction with PMBP,especially,for the samplescontaining high content of titanium.Many shortcomings of other methods ever reported can be overcomeby the present method.     

SOME ASPECTS OF THE THERMODYNAMICS OF MELTS

为了从二元系中两组元活度的测定值之比求得该两组元的活度值,导出了一个变通的 Gibbs-Duhem 方程式,并在 PbCl_2-SnCl_2,PbCl_2-CdCl_2,AgCl-CuCl,Cu_2S-FeS,PbO-BiO_(1.5),PbO-SbO_(1.5),CaO-CaF_2及 CaO-SiO_2-CaF_2等冶金熔体中得到应用.多年前所发展的从 Ag 和 Pb 二元相图求得两组元活度的方法已扩大到含有单个 AB 化合物的二元系.用这一方法已求得 In-Sb 和 Sn-Te 系中各组元的活度.在研究某些黑色冶金渣与金属间的平衡时,用一适当选择的非铁金属代替 Fe作为熔剂金属有助于克服某些实验上的困难.采用 Sn 或 Cu 与熔渣平衡研究了 CaO-SiO_2,CaO-Al_2O_3和 CaO-SiO_2-Al_2O_3体系.对 CaO-SiO_2二元系获得的数据可以认为具有足够的准确度来验证 Masson 模型的合理性.     

机床圆柱结合部的动态特性解析方法

在机床图纸设计阶段，预测机床整机的动态特性具有十分重要的意义，进行机床整机动态特性预测的难点在于如何确定结合部的刚度和阻尼参数，本文以机床结构中应用较普遍的圆柱结合部为例，研究了基于结合面基础特性参数的圆柱结合部动态特性解析方法，并编制相应解析软件，给出应用实例，证明本文的方法及软件是正确的。     

Study on bioleaching of primary chalcopyrite ore with thermoacidophilic archae

A high temperature-tolerating thermoacidophilic archae （TA） was isolated from water samples collected from a hot sulfur-containing spring in the Yunnan Province, China, and was used in bioleaching experiments of a low-grade chalcopyrite ore. The TA grow at temperatures ranging from 40 to 80℃, with 65℃ being the optimum temperature, and at pH values of l.5 to 4.0, with an optimum pH value of 2.0. The bioleaching experiments of the chalcvpyrite ore were conducted in both laboratory batch bioreactors and leaching columns. The results obtained from the bioreactor experiments showed that the TA bioleaching rate of copper reached 97% for a 12-day leaching period, while the bioleaching rate was 32.43% for thiobacillus ferrooxidans （Tf） leaching for the same leaching time. In the case of column leaching, tests of a two-phase leaching （196 days）, that is, a two-month （56 days） Tf leaching in the first phase, followed by a 140-day TA leaching in the second phase were performed. The average leaching rate of copper achieved for the 140-day TA leaching was 195mg/（L.d）, while for the control experiments, it was as low as 78mg/（L .d） for the Tf leaching, indicating that the TA possesses a more powerful oxidizing ability to the chalcopyrite than Tf Therefore, it is suggested that the two-phase leaching process be applied to .for the heap leaching operations, whereas, the TA can be used in the second phase when the temperature inside the heap has increased, and the primary copper sulfide minerals have already been partially oxidized with Tf beforehand in the first phase.     

3300mm轧机辊缝位置控制系统的研制

介绍3300mm中厚板可逆热轧机辊缝调整机构的组成,设计了3300mm轧机辊缝位置控制系统控制方案,给出了该方案中压下电机调速系统的设计过程,最终依据设计方案研制了辊缝控制系统,并在实际生产中运行使用。现场运行结果表明,用有准备切换逻辑无环流控制系统控制压下电机的辊缝位置,性能稳定,定位迅速,控制精度达到±0.3mm。宝钛集团使用该设备生产的钛及钛合金中厚板、镍板、锆及锆合金板等质量达到国际同类产品的先进水平。     

4-methoxy-2,6-bis(3,5-dimethylpyrazoyl)-1,3,5-triazine modified carbon paste electrode for trace Cu(Ⅱ) determination by differential pulse volt-ammetry

A differential pulse voltammetric method was developed for the sensitive and selective determination of Cu(Ⅱ) at 4-methoxy-2,6-bis(3,5-dimethylpyrazoyl)-l,3,5-triazine modified carbon paste electrode in 0.05 mol/L KHC8H4O4 solution (pH = 4.02). The oxidation peak of Cu(Ⅱ) was observed at 0.065 V(vs Ag/AgCl) by scanning the potential in positive direc-tion. The analysis procedure consisted of an open circuit accumulation step in stirred sample solution. It was followed by medium exchange to a clean solution and subsequently an anodic potential scan was affected to obtain the voltammetric peak. The current was proportional to the concentration of the Cu(Ⅱ) ion in a range of 1× 10-7-1×10-4 mol/L for 6 min accumulation; the most of metal ions did not interfere with the determination. The developed method was applied to Cu(Ⅱ) determination in coal-ash sample, the results agreed with that of atomic adsorption spectroscopy(AAS).     

甲硫基乙醛肟的合成工艺研究

本文研究了以乙醛肟为原料合成甲硫基乙醛肟的工艺。对各种因素对产品收率的影响进行了试验，找出了最佳工艺条件。经过工业性试验，证明本工艺安全可靠，收率稳定，产品质量好，经济效益高。