生物膜载体吸附剂对Zn2+的吸附

本文对生物膜吸附Zn^2＋的行为进行了准一级动力学方程和Elovich模型方程的拟合，对实验测定的吸附等温线用Langmuir与Freundlich吸附模型进行拟合；考察了pH值及温度对生物膜吸附Zn^2＋的影响。结果表明，Zn^2＋在生物膜载体吸附剂上的吸附动力学过程与Elovich方程有较好的拟合度，R^2=0．99994。单一等温吸附过程与Langmuir方程具有较好的拟合度，R^2=0．99785；pH=6～8，室温25℃对Zn^2＋分有较高的去除率。     

The compatibility of the blends of PUs with PVC and the adhesion behavior of PU to PVC

Three series of polyurethane adhesives—polyethyleneadipateurethane (PEAU), polybuthyleneadipateurethane (PBAU), and polyhexyleneadipateurethane (PHAU)—with the same MW and hard/soft segment ratio, based on the three polyesters polyethyleneadipate (PEA), polybuthyleneadipate (PBA), polyhexyleneadipate (PHA), with 4,4′-diphnylmethane diisocyanate (MDI), and butendiol were synthesized by solution polymerization. The crystallinity of these polyesters and polyurethanes (PUs) and the compatibility of blends of PUs with PVC were studied by means of wide-angle x-ray diffraction (WAXD), differential scanning calorimetry (DSC), dynamic thermomechanical analysis (DMA), testing of solubility, and phase contrast microscopy. The results indicated that PBAU/PVC and PHAU/PVC were compatible systems, but PEAU/PVC was incompatible. The adhesive strengths of the three adhesives were quite different from one another, in the order of PBAU ≥ PHAU ? PEAU. The influences of crystallinity and compatibility on adhesion were discussed, and the Diffusion Theory for PU-PVC systems was recommended. © 1995 John Wiley & Sons, Inc.     

Benzene Alkylation with Propane over Mo Modified HZSM-5

Benzene alkylation with propane has been studied over HZSM-5 loading 3.1–15.4 wt% Mo in continuous-flow microreactor under 350 °C and atmospheric pressure with the highest activity obtained at 6.7 wt% Mo loading. C_7–9 aromatics were obtained as main products while the total amount of benzene rings kept unchanged. i-Propylbenzene and n-propylbenzene are formed primarily, while toluene, ethylbenzene, and ethyl-toluene are formed secondly from the propylbenzenes. Catalytic performance of 6.7 wt% Mo/HZSM-5(38) partially poisoned by NH₃ shows that the strong acid sites play a crucial role in the alkylation. Low SiO₂/Al₂O₃ ratio of HZSM-5 in the Mo modified catalysts gives high propane conversion. Two hydrothermal treatment methods were applied to the 6.7 wt% Mo/HZSM-5(38) catalyst, caused decrease of propane conversion but result in different product distribution. A possible reaction mechanism concerning bifunctional active centers resulted from combination of loaded Mo species and strong acid centers on HZSM-5 is proposed.     

A paraffin-fueled SOFC system design and integration

This paper addresses an integrated design of paraffin-reformer, gas separations and the electricity production with a solid oxide fuel cell (SOFC). The overall design consists of three modules. First module is a system of paraffin reformer. In this module, the paraffin feed stream is to send to a steam-reformer. In the second module, the gas separations method illustrated is the combination of a methane-permeable membrane with a pressure-swing adsorption (PSA). In the third module, the purified hydrogen is fed to the SOFC unit. To be energy efficient, this paraffin-fueled SOFC system is designed with the consideration of heat integration. The intent of this paper is to provide a possible, alternative way of cogeneration systems for refinery and petrochemical plants.     

Low temperature SCR of NO with NH3 over carbon nanotubes supported vanadium oxides

A novel multiwalled carbon nanotube (CNTs) supported vanadium catalyst was prepared. The structure of catalyst prepared was characterized by TEM, BET, FTIR, XRD and temperature-programmed desorption (TPD) methods. The results indicated that vanadium particles were highly dispersed on the wall of carbon nanotubes. The V₂O₅/CNT catalysts showed good activities in the SCR of NO with a temperature range of 373–523 K. The Lewis acid sites on the surface of V₂O₅/CNT are the active sites for the selective catalytic reduction (SCR) of NO with NH₃ at low temperatures. It was suggested that the reaction path might involve the adsorbed NH₃ species reacted with NO from gaseous phase and as well as the adsorbed NO₂ species. The diameter of CNTs showed positive effect on the activities of the catalysts. Under the reaction conditions of 463 K, 0.1 Mpa, NH₃/NO = 1, GHSV = 35,000 h⁻¹, and V₂O₅ loading of 2.35 wt%, the outer diameter of CNTs of 60–100 nm, the NO conversion was 92%.     

基于CDT2000 I/O口的A/D转换系统设计

为实现传感器数据快速、高精度地转换,提出了一种采用AD7891芯片的A/D转换系统的设计方法。数据读、写和并行工作时序通过CDT2000 I/O口控制,CDT2000 I/O口的电位变化由PC/104通过总线操作。在AD7891与CDT2000之间添加JK触发器实现对A/D转换完成的识别。试验结果表明,这种方法能够满足数据采集系统的设计要求,并且在硬件上较容易实现。     

水声传感阵列指向性与系统传输性能研究

针对浅海水声通信中水汽界面和海底的反射产生多途效应对信号传输的影响,依据水下声传输原理,分析了水声信道中的噪声特点和产生多途效应机理,研究水声信道中声传感器指向性与传输性能关系,探讨水声传感阵列方式在水下通信环境的优势,设计合理的阵元间连接形式、阵列驱动电路和阻抗匹配电路,保证有效的功率耦合效率。经水下试验测试表明:采用一定指向性的声阵列结构,利用单个阵元波束宽度小于10°,构成阵列结构的波束宽度小于30°,并进行一定阻抗匹配,可减小能量损失,有效提高水声通信系统性能。     

基于RFID的虚拟标签算法研究与改进

针对室内定位算法VIRE的定位精度,特别是邻近边界目标的定位精度较低的问题,以RFID标签定位为研究基础,从改变VIRE算法中虚拟标签的插值方式和在边界上加入虚拟标签两个方面进行研究和改进。使用拉格朗日插值代替VIRE算法中的线性插值方式,使虚拟标签的数据更加接近实际环境值;在边界上加入虚拟参考标签能增加已知标签数,防止在计算待定位标签坐标时引入误差标签。实验结果表明,标签定位精度有了明显提高,整体能提高了35%,邻近边界标签定位精度提高较大,可达到50%以上。     

发电机内冷水系统的化学清洗

论述了发电机内冷水系统结垢的原因和进行化学清洗的依据，并介绍了实施化学清洗的系统和工艺     

An exploratory study of buyers’ participation intentions in reputation systems: The relationship quality perspective

Drawing upon a relationship quality framework, this study identifies how satisfaction, trust and different styles of handling conflict influence online buyers’ participation intentions in reputation systems associated with a C2C online shopping platform. Furthermore, we investigate how these effects are moderated by social conformity and the perceived value of knowledge. The results of a survey of 269 online buyers indicate that satisfaction, trust and an accommodating conflict handling style positively impact the intention to submit positive ratings, whereas an avoiding conflict handling style negatively affects the intention to submit positive ratings. Implications and suggestions for future research are provided.