Simulation study of peak junction temperature and power limitationof AlGaAs/GaAs HBTs under pulsed and CW operation

The authors have used a 3-D transmission-line matrix (TLM) modeling method to study the junction temperature distribution and power limitation of device geometries with multiple embedded heat sources. Peak values of the junction temperature against the dissipated power density under both pulsed and CW operation are presented for a typical power AlGaAs/GaAs HBT structure. These data should facilitate the rapid determination of junction temperature for a given output power, which is of paramount importance in power device design     

Eigenvalue-based algorithms for testing positive realness of SISO systems

A computational test for scalar positive real and strictly positive real functions is proposed in this paper. The input for this algorithm is state space representation, not necessarily minimal. It is derived for the discrete time problem, based on numerical stable eigenvalue computations. The test can be used in the continuous counterpart, which is in fact an improvement of an algorithm posed by Bai and Freund. Differences between the discrete and continuous time problems are also pointed out.     

Fuzzy reasoning Petri nets

This paper presents a fuzzy reasoning Petri net (FRPN) model to represent a fuzzy production rule-based system. The issues of how to represent and reason about rules containing negative literals are addressed in the proposed PN model. The execution rules based on the model are defined formally using the operators in max-algebra. Then, a fuzzy reasoning algorithm is proposed to perform fuzzy reasoning automatically. The algorithm is consistent with the matrix equation expression method in the traditional PNs and allows one to exploit the maximum parallel reasoning potential embedded in the model. The legitimacy and feasibility of the proposed approach are proved and validated through a turbine fault diagnosis expert system.     

安钢宽板坯连铸机达产实践

分析了安钢宽板坯连铸机在热试车期间出现的生产问题,总结出制约生产主要因素,制定针对性措施,使该连铸机在较短时间内实现达产创效.     

由呼出气中的氡浓度估计铀矿工体内~(225)Ra的负荷量

本文测量了某铀矿不同工种的56名矿工下矿井作业前的呼出气中的~(222)Rn浓度,并由此估算了他们体内的~(226)Ra 负荷量。按不同工种的人数加权,呼出气中的~(222)Rn 浓度平均值为34.1Bqm~(-3),体内~(226)Ra 负荷量的均值为1.95kBq。同时还对9名休息了2天的和2名离开井下作业3—4年的矿工以及12名来下过矿井的本矿工人呼出气中氡浓度进行了测量,由此估算出其体内~(226)Ra 负荷量的均值分别为1.11、0.94和0.17kBq。     

狗经氡子体暴露后血、毛中~(210)Pb 和~(210)Po 含量的动态变化

本文叙述了实验狗经氡子体暴露后血、毛中~(210)Po、~(210)Pb 含量、~(210)po/~(210)Pb 比率及血中~(210)Po,~(210)Pb 排出的动态变化。     

Effect of micro-alloying titanium on the dynamic recrystallization behaviour of steels

The effect of titanium addition on the dynamic recrystallization behaviour of steels has been investigated. Constant strain rate tension tests were conducted in vacuum in the temperature range from 925 to 1225°C. Dynamic recrystallization-time-temperature (RTT) curves were developed from the flow curves at ε? = 1 × 10^?2s^?1. The results of the different steels with and without Ti indicate that the onsets of dynamic recrystallization in all the steels are earlier at higher temperatures than at lower temperatures and the addition of titanium may shift the RTT curve of the C–Mn–Si steel towards the right, i.e. retard dynamic recrystallization. The retarding effect of Ti becomes more intensive at temperatures below about 1075°C where a transition of the RTT relationship occurs. Microstructural examinations show that titanium dissolved in austenite can retard the dynamic recrystallization and the precipitation of TiC produces a more intensive retarding effect.