大禹渡扬水工程枢纽沉沙池存在问题原因分析及对策

大禹渡扬水工程枢纽沉沙池是解决枢纽二级站水泵磨损及灌区渠道淤积的关键工程。现沉沙池沉沙效率低下，严重制约了灌溉效益的发挥。本文从沉沙池的建造历史、工程地质、池身结构、泥沙淤积等方面对沉沙池存在的问题进行了综合分析。     

S—135钢板热轧工艺研究

S—135钢板是水电站用高强耐磨不锈钢板,既要求强度高、韧性好,又要求耐磨、耐蚀性强,生产难度较大。除我厂外,目前国内尚无其它厂家能够生产这种钢板。该钢板在加热轧制,冷却过程中要解决很多技术难点。我们通过采用特殊的控制轧制和控制冷却工艺,很好地解决了诸多技术难点,使S—135钢板的开发研制取得了成功。为电站用高强度耐磨不锈钢生产提供了宝贵的经验,也为控制轧制及控制冷却技术在中板生产行业的应用起到了积极的推动作用。     

时效处理对 TiNi 合金相变与性能的影响

通过用ＴＥＭ等方法研究热处理制度（固溶处理、时效处理）对ＴｉＮｉ合金相变组织和性能的影响，找出了最佳热处理制度。结果表明，在４５０～５００℃进行时效处理，Ｔｉ－５０．８ａｔ％Ｎｉ的合金出现了大量的Ｔｉ３Ｎｉ４相，且恢复率最高。     

台阶中深孔爆破孔网参数优化

探讨了三道庄矿区露天台阶中深孔爆破合适的孔网参数值、钻孔超深值。分析了由此产生的技术经济效益。     

混凝土面板堆石坝坝料开采爆破试验

介绍在某水电站进行的混凝土面板堆石坝坝料开采爆破试验的情况。试验突破了仅根据岩石坚固性系数选取单位炸药消耗量的传统习惯，结合岩体裂隙与风化程度确定单位炸药消耗量，并采取分段装药，严格控制各段装药量和炮孔堵塞长度等措施，取得了良好的爆破效果。     

CTS-26型超声探伤仪典型故障的分析与排除

在简要介绍CTS-26型超声探伤仪工作原理及组成的基础上。对其几种典型故障作了具体的分析和处理。     

Modeling the Absorption of Acidic Gases by Alkanolamine Solutions Incorporating Several Reactions

A general model, based on double film theory, is developed to study absorption with chemical reactions. In the liquid film region, the model is a set of differential equations that describe the mass transfer accompanying several chemical reactions; the resolution of the system is achieved by the finite difference method using an implicit scheme combined with Newton's method. Continuity equations and equilibrium coefficients are exploited in the treatment of the bulk region, which is based on the Newton‐Raphson method; the results are used directly as boundary conditions in the liquid film equations. Maxwell‐Stefan equations have been used as a rigorous approach in this model.     

应用ATV71变频器有效解决给粉机变频器低电压跳闸问题

本文分析了给粉机变频器低电压跳闸的原因和解决办法，为解决给粉机变频器低电压跳闸，消除设备隐患提供了经验。     

Effect of Post Annealing on the Microstructure and Magnetic Properties of NdFeB/α-Fe/NdFeB Thin Films

A series of nanocomposite thin films, composed of Nd2Fe14B and α-Fe, has been prepared by DC-magnetron sputtering combined ion beam sputtering onto Si (100) substrates. The effects of post annealing on the microstructure and magnetic properties of [NdFeB/α-Fe/NdFeB]-type thin films have been investigated. The X-ray diffraction (XRD) study showed that annealing of the films for 30min at temperatures 550,600,650,700℃ resulted in the appearance of diffraction peaks, characteristic for Nd2Fe14B tetragonal structure, α-Fe and Nd2O3 phases. The investigation using the Vibrating Sample Magnetometer (VSM) with a maximum applied field of 2 T indicated that with the increase of the annealing temperature, the magnetic properties of the multilayer films were improved and reached peak value at 650℃ (Hci=41.72kA·m-1, Mr/Ms=0.4, (BH)max=30.35kJ·m-3), after which the magnetic properties were decreased greatly. Along with the increase of the thickness of α-Fe layer from Tα-Fe16nm, the coercivity Hci, saturation magnetization Ms, and remanence ratio Mr/Ms all declined. As the Atomic Force Microscope (AFM) indicated, after being annealed at 650℃ for 30min, the sample was showed fine surface morphology with grain size 60nm≤dα-Fe≤80nm and 100nm≤dNdFeB≤150nm.