Potential of proton-enhanced 13C n.m.r. for the classification of kerogens

High resolution n.m.r. spectroscopy, involving the technique of cross-polarization, along with magicangle spinning, was used in the structural characterization of eight kerogens of different origins, selected to represent the three types of kerogens (types I–III evolution paths). The influence of cross-polarization dynamics on the sensitivity of the method and the ratio of individual fractions in the spectrum was studied in more detail. It is suggested that an analysis of the influence of the mixing time is necessary prior to definitive characterization of any sample. Good separation of signals in aliphatic, aromatic, and carboxylic regions was achieved. The general correlation between the ¹³C n.m.r. structural characteristics and the classification based on ultimate analysis of the kerogens (types I–III, van Krevelen atomic H/C vs. O/C diagrams) was found to be satisfactory. The structural features of kerogens derived from ¹³C n.m.r. analysis agreed quite well with characteristics constituting the above mentioned classification. The ¹³C n.m.r. method used in this paper may be considered promising in the classification of kerogens.     

Mo—La2O3烧结坯间隙杂质的研究

通过扫描电镜（ＳＥＭ）、电子探针（ＥＰＭＡ）、Ｘ射线衍射（ＸＲＤ）及俄歇电子能谱（ＡＥＳ）研究了Ｍｏ－Ｌａ２Ｏ３烧结坯中的间隙杂质。结果表明：Ｌａ２Ｏ３的加入提高了烧结睛坯的抗弯强度和韧性。间隙杂质不驻存在于Ｍｏ中,而且在Ｌａ２Ｏ３粒子表面吸附,使晶界杂质浓度降低。     

Phase transition,microstructure, and dielectric properties of Li/Ta/Sb co-doped (K,Na)NbO3 lead-free ceramics

Li/Ta/Sb co-doped lead-free (K_0.4425Na_0.52Li_0.0375)(Nb_0.93−xTa_xSb_0.07)O₃ (abbreviated KNLNST_x) piezoelectric ceramics, with Ta-doping ratio of x ranging from 0.0275 to 0.0675, were synthesized using the conventional solid-state reaction method at the sintering temperature of 1130 °C. The effects of Ta content on the microstructure, dielectric properties, and phase transition behavior of the prepared ceramics were systematically investigated. The X-ray diffraction results show that all KNLNST_x ceramics formed a secondary phase, which is assigned to the tetragonal tungsten-bronze type (TTB) structure phase, and showed a phase transition from an orthorhombic symmetry to a tetragonal symmetry across a composition region of 0.0375<x<0.0475. The grain shape and size that correspond to the phase structure transformations can be clearly observed in the scanning electron microscopy images. As x increased to 0.0475, the KNLNST_0.0475 ceramics changed from orthorhombic to tetragonal structure and showed excellent piezoelectric properties of d₃₃=313 pC/N, k_p=47%, and ε_r=1825. By contrast, samples of x=0.0375 with orthorhombic symmetry exhibited poor piezoelectric properties, with d₃₃=200 pC/N and ε_r=1015. These results indicate that phase structure is vital in the piezoelectric properties of KNN lead-free ceramics.     

Kinetic study of Diels–Alder reaction involving in maleimide–furan compounds and linear polyurethane

Linear polyurethane was synthesized by Diels–Alder (DA) reaction between a polyurethane prepolymer end-capped with furan rings (MPF) and bismaleimide (BMI). The polymerization kinetics were studied following a preliminary kinetic study of the DA reaction between furfuryl alcohol (FA) and BMI compounds by attenuated total reflection infrared, ultraviolet–visible and in situ ¹H NMR spectroscopies, where in situ ¹H NMR spectroscopy was selected as the analytical method of choice to study the DA reaction between MPF and BMI. The results showed that the reaction followed second-order kinetics, and the most beneficial experimental conditions to maximize conversion were identified.     

Tunable microwave absorption properties of nickel-carbon nanofibers prepared by electrospinning

The nickel-carbon nanofibers (Ni-C NFs) were fabricated by the electrospinning of poly(vinyl alcohol) (PVA) and nickel acetate tetrahydrate (NiAc) solution precursor with succedent PVA pyrolyzation and calcination process. The microwave absorption performance and electromagnetic (EM) parameters of the NFs were researched over the frequency range of 2.0–18.0?GHz. Both the impedance matching and EM wave absorption properties of the Ni-C NFs were improved by changing the carbonization temperature. The effect of graphitization degree on reflection loss (RL) and the possible loss mechanisms were directly displayed in the comparative study of each sample. The optimal RL value of ??44.9?dB and an effective frequency bandwidth of 3.0?GHz under a thickness of 3.0?mm can be reached by a sample calcined at 650?°C. These lightweight Ni-C NFs composites can be promising candidates for EM wave absorbers due to the combination of multiple loss mechanisms, nano-size effect and good impedance matching between Ni nanoparticles and CNFs.     

用双螺杆挤出机进行熔体扩链的PUR-T结构与性能研究

以预聚物为扩链剂,用双螺杆挤出机在熔融状态下对热塑性聚氨酯弹性体(PUR—T)进行熔体扩链．用热重分析仪、动态热机械仪、差示扫描量热仪和扫描电镜研究了扩链后PUR—T的形态结构、拉伸性能、回弹性、热降解稳定性、热转变和动态力学性能。结果表明,用双螺杆挤出机进行熔体扩链是可行的,而且扩链后的PUR—T性能较扩链前优异。     

铝系阻燃剂阻燃PP的力学性能研究

将用偶联剂处理的碱式碳酸铝镁加入到聚丙烯中，通过对体系阻燃性、力学性能等研究得出：碱式碳酸铝镁能够对聚丙烯起到良好的阻燃效果，碱式碳酸铝镁的加入提高了聚丙烯的冲击强度，当碱式碳酸铝镁质量分数为23％时，体系的冲击强度最高。研究了偶联荆的用量对体系力学性能的影响，结果表明，随偶联荆用量的增加，体系的拉伸强度降低，冲击强度先升高后降低，当偶联荆质量分数为1．0％时，体系的冲击强度最高。     

Mn对含炭耐火材料抗渣侵蚀性的影响

以烧结板状刚玉、锆莫来石、天然鳞片状石墨为主原料 ,酚醛树脂为结合剂 ,Al、Si、B4C、Mn粉为添加剂 ,经 1 4 50℃埋炭烧成后 ,制成铝炭和铝锆炭系列试样 ,并对各试样的抗渣侵蚀性能进行了对比研究。结果表明 :在铝锆炭材料中 ,当Mn与Al、Si复合加入且Mn与C的质量比为 1∶4时 ,试样的抗侵蚀性和渗透性均较好 ;在铝炭材料中 ,当Mn与Al、Si、B4C复合加入且Mn与C的质量比为 1∶4时 ,试样的抗渗透性较好     

低浓度的阴离子洗涤剂实验室内的质量控制

在环境监测中低浓度的阴离子洗涤剂实验室内质量控制应采取以下措施：空白试验值测定，检出限的确定，空白试验的质量控制图，校准曲线的检验，标准样品的测定。     

Transparent niobate glass-ceramics for optical limiting

The construction of nonlinear optical materials featuring asymmetric transmission of light is of great technological importance for various applications, including optical switching and optical power limiting. A significant challenge is the scalable fabrication of material candidates with good photochemical stability, high optical transmittance, and excellent optical limiting performance. Here, we present a nanocrystallization avenue for constructing hybrid optical limiting materials that exhibit ultrafast and robust optical limiting performance. The experimental results show that the controllable relaxation of a niobate glass may lead to the clustering of Nb-O units and contracting of the bandgap. It results in the notable improvement in nonlinear optical properties, including the enhanced saturation irradiance (380 GW/cm²), doubly increased nonlinear coefficient, and decreased limiting threshold (200 GW/cm²). Our results suggest a promising material that exhibits promising applications for protecting eyes and sensitive components from laser-induced damage.