钢管减阻型内涂层生产工艺及设备

介绍了钢管减阻型内涂层技术的生产工艺和主要设备，给出了内涂层生产线典型的工艺布置，并对主要设备的组成及工作原理进行了介绍。     

基于PLC电液比例控制的液力测功装置开发及其应用

本文介绍一种齿轮动态加载试验规范及技术要求，论述了运用电液比例控制技术所设计的液压加载系统原理及其使用效果，并简述由此构造的液力测功装置的原理与应用前景。     

A computational study of LP-based heuristic algorithms for two-dimensional guillotine cutting stock problems

In this paper we develop and compare several heuristic methods for solving the general two-dimensional cutting stock problem. We follow the Gilmore-Gomory column generation scheme in which at each iteration a new cutting pattern is obtained as the solution of a subproblem on one stock sheet. For solving this subproblem, in addition to classical dynamic programming, we have developed three heuristic procedures of increasing complexity, based on GRASP and Tabu Search techniques, producing solutions differing in quality and in time requirements. In order to obtain integer solutions from the fractional solutions of the Gilmore-Gomory process, we compare three rounding procedures, rounding up, truncated branch and bound and the solution of a residual problem. We have coded and tested all the combinations of algorithms and rounding procedures. The computational results obtained on a set of randomly generated test problems show their relative efficiency and allow the potential user to choose from among them, according to the available computing time. Rceived: January 9, 2001 / Accepted: December 10, 2001     

透湿膜的透湿机理与膜的研究概况

基于透湿膜的空气除湿是一种比较新颖的空气除湿方法。本文介绍了各种膜在空气除湿领域的应用情况，结合对膜制备工艺的简要介绍，侧重对原除湿原理，亲水性的高分子纤维素膜，凝胶膜和分子筛无机膜在空气除湿领域的研究和进展进行了分析。     

对热量表流量传感器若干技术问题之初探

本文根据笔者对热量表流量传感器的研究体会,详尽分析了小口径机械式热水表作为热量表流量传感器时存在的主要问题,如量程问题,冷热水流量系数差异问题,降低始动流量和提高小流量情况下精度问题,磁传方式存在的磁干扰问题,失步问题,以及对我国供暖系统水质的适应性问题.文章根据研究和分析结果对上述问题提出一些初步解决方案与业内同行研讨,以期提高我国热量表的研制水平.     

CHARACTERIZATION OF Si_(1-x-y)Ge_xC_y FILMS GROWN BY ION IMPLANTATION AND SUBSEQUENT SOLID PHASE EPITAXY

Si1-x-yGexCy ternary alloy films were grown on monocrystalline silicon substrates by C ion implantation and subsequent solid phase epitaxy (SPE). Two-step anneal-ing technique was employed in the SPE. The structure and electrical properties of the alloy films were determined using Fourier transform infrared spectroscopy and van der Pauw Hall measurements, respectively. With the optimization of two-step anneal-ing technique for the implanted Si1-x-yGexCy layers, a certain amount of C atoms occupied substitutional sites and no SiC was formed.     

ˮ�ཬ������������Ƽ�����Ľ�������о�

解决注水泥作业的防气窜问题，是提高固井质量，保护油气层的关键技术。现有预测和防止水泥浆气管理的方法虽然较多，但应用于现场却有一定困难，主要表现在所考虑的因素比较单一，有些高温、高压下的水泥浆性能参数难以测定。文章在分析国内外预测和防止气窜方法的基础上，应用水泥浆浆体在环空的组成，GFP系数、水泥浆稠度阻力系数（A）及多凝水泥和环空加压等措施，拟定出一套提高水泥浆顶替效率，保证水泥浆动态和静态过程压力平衡关系的具体设计方法。     

Oscillating Cup Viscosity Measurements of Aluminum Alloys: A201, A319 and A356

An oscillating cup viscometer was developed to measure the absolute viscosities of molten metals. Previous experiments established the capability of the apparatus to characterize the viscosities of molten nickel-based superalloys. However, modifications to the instrument and its theoretical analysis were required for reliable measurements on molten aluminum alloys, presumably due to their lower densities and lower viscosities. The theoretical literature for the fluid flow inside an oscillating cup is reviewed, and a working equation without any correction factor is developed for the improved viscometer. Some design parameters of the viscometer that directly affect the accuracy of viscosity estimation by using the working equation are discussed. A special vertical furnace was adopted to uniformly heat a longer cylindrical sample (10 mm inner diameter and 120 mm length) with a temperature difference of less than 2°C over the sample length. The measuring procedure was also improved to get more accurate motion parameters. It is estimated that the working equation and improved instrument provide an uncertainty of less than 4%. In addition, applications and experimental data are presented for pure aluminum and three aluminum alloys: A201, A319, and A356.     

纳米4-H碳化硅薄膜的掺杂现象

对纳米晶SiC薄膜进行了P和B的掺杂,B掺杂效率比P高,其暗电导预前因子与激活能遵守Meyer-Neldel规则,并有反转Meyer-Neldel规则出现.掺杂效率比非晶态碳化硅薄膜高是纳米碳化硅薄膜的特点之一.非晶态中的隧穿和边界透射对输运有一定贡献.     

我国建筑涂料技术进步简评

从以下诸方面简述我国建筑涂料的技术进步:⑴新品种涂料的研制开发;⑵加强对配套材料及施工技术的研究;⑶超细填料在涂料中的应用;⑷计算机自动配色技术;⑸产品标准的修订;⑹建筑涂料的实用范围扩大。