Molecular dynamics simulation on flow behavior of nanofluids between flat plates under shear flow condition

Molecular dynamic model of nanofluid between flat plates under shear flow conditions was built. The nanofluid model consisted of 12 spherical copper nanoparticles with each particle diameter of 4 nm and argon atoms as base liquid. The Lennard–Jones (LJ) potential function was adopted to deal with the interactions between atoms. Thus, the motion states of nanoparticles during the process of flowing were obtained and the flow behaviors of nanofluid between flat plates at different moments could be analyzed. The simulation results showed that an absorption layer of argon atoms existed surrounding each nanoparticle and would accompany with the particle to move. The absorption layer contributed little to the flow of nanoparticles but much to the heat transferring in nanofluids. Another phenomenon observed during shear flowing process was that the nanoparticles would vibrate and rotate besides main flowing with liquid argon and these micro-motions could strengthen partial flowing in nanofluids.     

Acoustic emission from gas-filled coal under triaxial compression

Acoustic emission (AE) experiments have been performed on gas-saturated coal specimens under conventional triaxial compression. The AE characteristics were investigated for a methane gas flow through the coal specimen. One AE parameter, AE count, when normalized by the total count number was used to represent the damage evolution in the gassy coal. It is shown that this AE parameter is a reasonable indicator for damage occurring within the coal specimen since its envelope has almost the same shape as the complete stress–strain curve, except for a short time delay. In addition, the change in AE count is highly consistent with the change in coal permeability. Test results also show that methane containing coal emits a small number of AE events before entering the yield stage. AE activity gradually increases during the yield process up to the peak stress. The lowest permeability corresponds to the highest AE activity, implying failure will soon occur. An AE based constitutive model was constructed and the theoretical results agree well with those of experiments.     

医用电解质分析仪的研制

对医学常规体液检查中5种离子浓度的检测,利用单片机、高精度A/D芯片、实时时钟等,给出了一种切实可行的解决方案,并详细地阐述了系统的软硬件设计。     

对社会主义政治文明建设的新认知

发展社会主义民主政治,建设社会主义政治文明是中国共产党务实的战略思维和历史唯物主义的发展观,反映了经济社会发展的内在求,揭示了人、社会和自然的和谐统一.社会主义政治文明进程本身也体现和反映出人类政治文明的认知性、实践性和过程性.     

一种新型声光玻璃研究与研制

研制出了一种新型锗酸盐声光玻璃。与已报导的亚碲酸盐玻璃和重燧石玻璃的性能作了比较。我们的锗酸盐玻璃的声光品质因数优于重燧石玻璃。     

基于Jack的虚拟环境中一种防止穿越的实现

在虚拟环境下虚拟人手和虚拟物体的交互中,会发生穿越现象。为了解决穿越问题,在人体模型系统Jack的虚拟环境中,根据约束Constraint对象的特点,利用Constraint对象来模拟物体对人手阻挡作用,并利用约束队列实现了对场景中Constraint对象的管理,达到防穿越的效果。     

Preparation and structure of fluorinated/non-fluorinated polyacrylate gradient emulsion blend film

The emulsion blend method, which is environmentally friendly and energy saving, was used to prepare a compositional gradient film of fluorinated/non-fluorinated polyacrylate in this paper. The size and glass-transition temperature (T_g) of the emulsion particles were designed to enhance the driving force of their selective congregation and promote the formation of gradient structure. The structures and surface properties of the obtained films were characterized. The results showed that when the fluorinated components have much smaller particle size and higher T_g than those of fluorine-free polyacrylate components, the gradient structures formed in the direction across the film thickness of the films. The concentration of the fluorinated component increased gradually from film-glass interface to film-air interface in the blend film, making the surface free energies of the two sides of the gradient film distinctively different.     

Truly Concomitant and Independently Expressed Short‐ and Long‐Term Plasticity in a Bi2O2Se‐Based Three‐Terminal Memristor

Concomitance of diverse synaptic plasticity across different timescales produces complex cognitive processes. To achieve comparable cognitive complexity in memristive neuromorphic systems, devices that are capable of emulating short‐term (STP) and long‐term plasticity (LTP) concomitantly are essential. In existing memristors, however, STP and LTP can only be induced selectively because of the inability to be decoupled using different loci and mechanisms. In this work, the first demonstration of truly concomitant STP and LTP is reported in a three‐terminal memristor that uses independent physical phenomena to represent each form of plasticity. The emerging layered material Bi₂O₂Se is used for memristors for the first time, opening up the prospects for ultrathin, high‐speed, and low‐power neuromorphic devices. The concerted action of STP and LTP allows full‐range modulation of the transient synaptic efficacy, from depression to facilitation, by stimulus frequency or intensity, providing a versatile device platform for neuromorphic function implementation. A heuristic recurrent neural circuitry model is developed to simulate the intricate “sleep–wake cycle autoregulation” process, in which the concomitance of STP and LTP is posited as a key factor in enabling this neural homeostasis. This work sheds new light on the development of generic memristor platforms for highly dynamic neuromorphic computing.     

Evaluation of Fatigue Crack Orientation Using Non-collinear Shear Wave Mixing Method

In this paper, a non-collinear shear wave mixing technique is proposed for evaluation of fatigue crack orientation. Numerical analysis of the nonlinear interaction of two shear waves with crack is performed using two-dimensional finite-element simulations. The simulation results show that the nonlinear interaction of the two shears waves with cracks leads to the generation of transmitted and reflected sum-frequency longitudinal waves (SFLW), moreover the propagation direction of reflected SFLW is correlated with the orientation of crack, which can be used for crack orientation evaluation. Non-collinear wave-mixing experiments were conducted on specimens with fatigue crack. The experimental results show that the directivity of the generated SFLW agrees well with the simulation results, and non-collinear shear wave mixing has potential use in fatigue crack orientation evaluation.