HfOxNy的场发射特性

用直流溅射和高温退火相结合的方法制备了HfOxNy薄膜并测试了其场发射性能,发现其具有较低的开启电场、较大的发射电流密度以及很好的发射稳定性.高压"锻炼"对提高HfOxNy场发射性能起着关键作用,这与高压"锻炼"下薄膜内部结构和表面性质的改变有关.对场发射机理的研究表明,HfOxNy的场发射符合经典的FN隧穿理论.     

负离子功能针织物在直接蒸发冷却式空调中的应用

在分析负离子净化空气的原理及环境状况与空气中负离子浓度的关系基础上,应用负离子功能粘胶长丝和涤纶短纤混纺纱针织物作为空调滤材,利用空调出风(冷风)使针织物滤材试样飘动,相互拍击摩擦,使空调出风中的氧气分子和水分发生有效电离,从而产生大量空气负离子。实验结果表明,负离子功能粘胶长丝和涤纶短纤混纺纱针织物都有释放空气负离子的功能;而且在同规格纱线的平针组织、双罗纹组织、蜂巢组织和畦编组织针织物中,畦编组织针织物释放的负离子量最大;空气相对湿度对功能材料释放负离子数量有明显影响,当相对湿度在65%~70%时释放的负离子量趋于最大。     

Development of a heterogeneous microstructurally based finite element model for the prediction of forming limit diagram for sheet material

A heterogeneous finite element model with randomly distributed inhomogeneities has been developed for the determination of the forming limit diagram (FLD) for thin aluminum sheet material based on the prediction of localized necking. The strength difference between the inhomogeneities and the matrix is ascertained either from the fluctuation of the experimental stress-strain curve or from a micromechanical analysis that uses a representative particle field. By changing the specimen geometry and friction conditions, different stress states (or strain paths) are achieved. A plot of the critical Oyane fracture parameter is used to identify the limit strain state. Also, a plot of equivalent plastic strain rate is used to distinguish the boundary of intense shear bands and hence to identify where to take the measurement point. Both a plane stress model and a three-dimensional (3-D) model are adopted to predict the shear banding phenomenon and hence the FLD. The predicted FLD agrees well with the measurements from a recent round robin experimental FLD involving several independent research laboratories. The Taguchi method is applied to assess how the various parameters involved in the heterogeneous model affect the calculated forming limit strain.     

化学教学中"多媒体教学课件开发"基本思路的探讨

在电化教学的基础上，现代教育技术在教学领域里起着越来越重要的作用，而多媒体教学课件。则是现代教育技术领域内的一技奇芭，正逐渐地放射出强大的、耀眼的光辉。本文将从四个方面探讨化学教学中“多媒体教学课件开发”的基本思路。     

气藏水平井非稳态产能预测新方法研究

针对高产气藏储层特征,建立起气藏水平井非稳态产能预测模型,对高产气藏的产能进行分析和预测.实例分析表明,通过该模型形成的基于气藏与井筒耦合作用的非稳态产能预测新方法,对于单井产能预测具有优越性、长远性和实用性.该方法可直接利用不稳定压力测试成果进行预测,还可通过生产动态资料拟合来确定地层参数和预测,也可用来研究不同工作制度、完井方式,以及增产措施改善情况下的产能变化,为衰竭式开采的气藏工程研究提供了先进的手段.     

A 5 mW and 5% efficiency 210 GHz InP-based heterostructure barrier varactor quintupler

This letter reviews the design, construction, and measurement of a 210 GHz heterostructure barrier varactor frequency quintupler. The quintupler utilizes planar heterostructure barrier varactors (HBVs) based on the InGaAs/InAlAs/AlAs material system and has produced a measured output power of 5.2 mW with 5.2% conversion efficiency at 210 GHz. This performance is comparable to the state-of-the-art results reported in the literature for HBV frequency triplers operating at millimeter and submillimeter wavelengths.     

钢管机械扩径工艺研究

介绍了大口径直缝焊管机械扩径的优点，原理及扩径力的计算，找出影响扩径力及扩径头寿命的因素。     

光测遥测数据联合计算速度的方法

提出了利用遥测的过载、俯仰角信息和光测的坐标联合计算弹道关机段速度的方法，从遥测结果的系统误差、随机误差和数值积分的截断误差三万面对剩余误差的影响进行了精度分析，并给出了速度精度的算法。     

mc-Si:H/c-Si solar cell prepared by PECVD

Hetero-junction solar cells with an mc-Si:H window layer were achieved. The open voltage is increased while short current is decreased with increasing the mc-Si:H layer's thickness of emitter layer. The highest of V oc of 597 mV has obtained. When fixed the thickness of 30 nm, changing the N type from amorphous silicon layer to micro-crystalline layer, the efficiency of the hetero-junction solar cells is increased. Although the hydrogen etching before deposition enables the c-Si substrates to become rough by AFM images, it enhances the formation of epitaxial-like micro-crystalline silicon and better parameters of solar cell can be obtained by implying this process. The best result of efficiency is 13.86% with the V oc of 549.8 mV, J sc of 32.19 mA·cm-2 and the cell's area of 1cm2.     

Morphology control of titanium oxides by tetramethylammonium cations in hydrothermal conditions

The effect of tetramethylammonium cations (TMA⁺) on TiO₂ crystal morphology in hydrothermal conditions has been studied. The as-synthesized samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM) methods. The morphologies including besom-like particle, nanosheet and nanotube have been observed. The different ways TMA⁺ cations in the hydrothermal bases affect the crystal growth manner are suggested to be responsible for the different morphologies of the as-synthesized samples.