Study on the flash butt welding of 400 MPa ultra-fine grain steel

A 400 MPa ultra-fine grain steel possesses high strength and toughness. Due to its fine grain size, the heat affect zone (HAZ) of the weld joint will soften during welding. The weldability of 400 MPa ultra-fine reinforced steel bar of flash butt welding is investigated by using the micro metallographical examination and macro-mechanical-property tests. The joint of flash butt welding has a superior mechanical property. The HAZ in the weld joint does not show apparent softening. There is only a localized softening spot inside the weld seam, which does not affect the property of the whole joint. Therefore, flash butt welding is appropriate for joining the 400 MPa ultra-fine grain reinforced steel bars. The resulting weld joint has excellent mechanical properties.     

Effects of CeF3 on properties of self-shielded flux cored wire

0 IntroductionSelf-shielded flux cored wire is a newly developedwelding material used without gas protection. Use of suchcored wires has grown rapidly in developed countriesbecause of the following advantages: simple use, goodwind resistance ability, lower cost resulted from highproductivity and strong desulfurization ability[1]. Self-shielded flux cored wires are preferred for on-site weldingsuch as ship and barge building, storage tank, bridge,offshore oil platform buildings and so on[2 -3].…     

Si及变质处理对Mg2Si/Mg复合材料的影响

分析了Mg-Si二元合金直接原位形成Mg2Si/Mg复合材料的过程,研究了Si含量以及变质处理对复合材料组织和性能的影响。试验结果表明,随着合金中Si含量的增加,合金的流动性降低,复合材料中原位Mg2Si的数量增多,树枝晶形态更为发达;对优化的Mg-8Si合金,进行混合稀土(MM)和Sb变质处理,可明显改善Mg2Si的形态和分布,但Sb变质的效果要好于MM。合金经质量分数为1.2%的Sb变质处理后,Mg2Si以颗粒状均匀分布在Mg基体中,从而使复合材料具有较好的耐磨性。     

Experiment and simulation study of 3D magnetic field sensing for magnetic flux leakage defect characterisation

Magnetic flux leakage (MFL) testing is widely used to detect and characterise defects in pipelines, rail tracks and other structures. The measurement of the two field components perpendicular to the test surface and parallel to the applied field in MFL systems is well established. However, it is rarely effective when the shapes of the specimens and defects with respect to the applied field are arbitrary. In order to overcome the pitfalls of traditional MFL measurement, measurement of the three-dimensional (3D) magnetic field is proposed. The study is undertaken using extensive finite element analysis (FEA) focussing on the 3D distribution of magnetic fields for defect characterisation and employing a high sensitivity 3-axis magnetic field sensor in experimental study. Several MFL tests were undertaken on steel samples, including a section of rail track. The experimental and FEA test results show that data from not only the x- and z-axes but also y-axis can give comprehensive positional information about defects in terms of shape and orientation, being especially advantageous where the defect is aligned close to parallel to the applied field. The work concludes that 3D magnetic field sensing could be used to improve the defect characterisation capabilities of existing MFL systems, especially where defects have irregular geometries.     

线轴注塑模具设计

针对线轴的工艺特点及在生产中存在的平面翘曲、壁厚不均等问题，给出了实用模具结构。详细介绍了模具各系统及成型零件的设计，论述了模具的工作过程。模具结构紧凑，操作方便，可实现塑件的全自动生产，生产效率高，且成型塑件质量好。     

CB20砖和硅莫砖在我厂回转窑上的应用

浩良河水泥厂1995年6月投产的φ3.95m×560m新型干法回转窑生产线,设计产量2000t/d,经技改后目前产量最高达到2400t/d,运行效益良好。在回转窑节能提产的过程中,窑衬也经过了不断的     

成色剂COY—5中主要杂质的分析研究

应用高效液相色谱、薄层色谱、质谱及核磁共振谱等仪器分析手段，提出了成色剂ＣＯＹ—５中主要杂质的分子结构，指出了该杂质的产生原因和机理，以及降低该杂质含量的最佳途径     

掺纳米Al2O3的纳米ZrO2(4Y)固体电解质的电性能

以纳米ZrO2(4Y)粉和纳米Al2O3粉为原料, 单轴成型, 1 200, 1 300 ℃无压烧结. 对掺不同质量分数(0.0～5.0%)Al2O3的ZrO2(4Y)烧结体, 用XRD, SEM和TEM研究了相组成和微观结构. 在不同温度下(300～1 000 ℃)测试了交流阻抗谱, 发现掺很少量的纳米Al2O3可降低ZrO2(4Y)的晶粒电阻. 但随着Al2O3掺入量的增加, 晶界电阻增大, 晶粒电阻也有所回升. 晶粒和晶界电导活化能则随Al2O3掺入量的变化不大. 对1 200 ℃,2 h烧结样品, 在1 000 ℃时, 掺0.5% Al2O3的ZrO2(4Y)样品有最大电导率, 为3.8×10-2Ω-1·cm-1.     

CO还原液态铁氧化物的动力学研究

在1678K的温度下测定了用CO或CO与Ar的混合气体还原浮士体的反应速度浮士体放在纯铁坩埚中，还原速度是根据红外CO2气体分析仪所测出的CO2生成量来求出的．实验表明表现还原速度正比于气体中CO分压，并与气体流量的1．59次方有关，反应的前或其速度是由气相的传质速度所控制，化学反应的速度常数最小为60（g／atm·min·cm2）．     

基于FVM格式的二维水动力学模型在河道整治工程流态分析中的应用研究

本文基于有限体积单元格式(FVM格式)建立河道二维水动力模型,并将模型用于河道整治工程流态分析计算中,此外结合断面实测水位和流速数据对构建模型进行验证。研究结果表明:基于FVM格式的浅水二维水动力模型适用于非恒定流的流态计算,计算的断面水位和流速与实测值之间的绝对误差值分别在0.08―0.46m和0.3―2.3m/s之间,相关系数均在0.6782―0.7845之间;相比于整治前,整治后的河道断面流速有所减小,断面过流能力相应增加,有助于区域防洪安全。研究成果对于河道整治工程后防洪影响评价流态分析计算提供方法参考。