Erbium-doped fiber amplifier second-order distortion in analog links and electronic compensation

The authors study the second-order distortion when an erbium-doped fiber amplifier (EDFA) is used to amplify the analog optical AM cable TV (CATV) multiple carrier signal from a directly modulated distributed feedback (DFB) semiconductor laser. Experimentally, it was seen that this second order distortion depends critically on the gain of the EDFA fiber amplifier. The authors attribute this distortion to the interaction between the frequency chirping of the DFB laser and the variable gain with wavelength of the amplifier. The authors describe an electronic predistorter that compensates the nonlinearity produced by the DFB-laser-EDFA combination. As a result, the high power advantage of the EDFA can be fully realized in spite of the potential for second-order distortion in the system.<>     

Three‐dimensionally braided carbon fiber–epoxy composites,a new type of material for osteosynthesis devices. I. Mechanical properties and moisture absorption behavior

In recent years, three‐dimensionally (3D) braided composites have attracted a great deal of attention because of their high‐impact damage tolerance and fatigue life, superior fracture toughness, and so forth, and have been used in aeronautics, military, and transportation. These advantages make them strong candidates for osteosynthesis devices. In this study, 3D braided carbon fiber–epoxy (C_3D/EP) composites were produced via a simple vacuum impregnation technique. The load‐deflection curve, mechanical properties, and influence of fiber volume fraction, braiding angle, and axial reinforcing fibers were examined to determine their suitability for internal fixation devices. It is found that the C_3D/EP composites have excellent toughness and do not show brittleness when fractured because of their relatively high void content. The flexural, shear, and impact strengths of the C_3D/EP composites are excellent. It was shown that a C_3D/EP composite with a stiffness similar to load‐bearing bones can be made while maintaining enough strength. It is concluded that a relatively higher void content and braiding angle is more suitable for the C_3D/EP composites from the viewpoint of requirements of fracture fixation materials. The moisture absorption behavior and changes in mechanical properties caused by moisture uptake were evaluated. Results show that absorbed moisture slightly decreases mechanical properties of the C_3D/EP composites. Contrary to the unreinforced epoxy, the moisture absorption behavior of the C_3D/EP composites cannot be described with Fick's law of diffusion, probably because of the presence of voids and/or 3D fiber structure. The exact mechanisms should be proposed in further investigations. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1031–1039, 2002     

A simple determination of steroidal alkaloid glycosides by thin-layer chromatography immunostaining using monoclonal antibody against solamargine

A method of determination for solasodine glycosides by using thin-layer chromatography (TLC) immunostaining was investigated. Solasodine glycosides separated by silica gel TLC were transferred to a polyvinylidene difluoride membrane. The membrane was treated with sodium periodate solution followed by bovine serum albumin (BSA), resulting in a solasodine glycoside-BSA conjugate. Conjugation was confirmed by matrix-assisted laser desorption/ionization mass spectrometry. Individual spots were stained by monoclonal antibody against solamargine. Immunostaining of solasodine glycosides was more sensitive compared to other stainings. The newly established immunostaining method can be extended to analysis of the distribution of solasodine glycoside in the plant body.     

On detecting the presence of fetal R-wave using the moving averagedmagnitude difference algorithm

An efficient algorithm detecting the presence of a fetal QRS complex is presented. The proposed fetal QRS detection method computes the averaged magnitude of the difference between the fetal ECG signal and the reference signal to detect the fetal QRS event. The detected fetal QRS complexes are exponentially averaged to generate the template signal which can track the slowly varying shape of the fetal ECG signal. As an effort to obtain improved detection performances, two approaches of normalizing the fetal ECG signal and the template are considered.     

20 Gbit/s soliton transmission using alternating dispersionarrangement in standard fibre systems

An alternating dispersion arrangement is proposed for soliton systems with dispersion compensation to improve soliton stabilisation. A transmission experiment at 20 Gbit/s over 2600 km long singlemode fibre was successfully demonstrated by employing this novel dispersion arrangement     

Evaluation of different methods of catching anopheline mosquitoes in western Venezuela

During a longitudinal study of vector biology and malaria transmission in western Venezuela, adult mosquitoes were collected by different methods and their efficiency was compared with human landing catches. CDC light traps, a double-net, a calf-baited trap and collection of resting mosquitoes on vegetation were tested. These methods did not prove to be effective substitutes for human landing catches.