Random switching techniques for inverter control

New techniques which dramatically reduce acoustic noise by randomising the inverter switching frequency for inverter control are presented. It is shown that the proposed techniques combine the advantages of conventional pulsewidth modulation (PWM) techniques based on regular-sampling techniques and random PWM techniques     

Tramadol, M1 metabolite and enantiomer affinities for cloned human opioid receptors expressed in transfected HN9.10 neuroblastoma cells

Tramadol hydrochloride is a centrally acting synthetic analgesic in widespread clinical use. Despite different degrees of opioid-like characteristics in preclinical tests, it is characterized by lack of full naloxone reversibility or naloxone-precipitated withdrawal in humans. To investigate this apparent discrepancy, the present study measured the affinity of tramadol (and its enantiomers) and an active O-desmethyl metabolite (M1) (and its enantiomers) to cloned human opioid receptors of the mu, delta and kappa type stably expressed in HN9.10 neuroblastoma cells. At mu sites, the Ki values for tramadol, its (+) and (-) enantiomers, M1, and its (+) and (-) enantiomers were 17000, 15700, 28800, 3190, 153 and 9680 nM, respectively, compared to 7.1 nM for morphine. These results are consistent with the suggestion of a non-opioid contribution to the clinical profile of tramadol.     

Ternary alloying study of MoSi2

Ternary alloying of MoSi₂ with adding a series of transition elements was investigated by X-ray diffraction (XRD), scanning electron microscopy, transmission electron microscopy (TEM), and energy dispersive spectroscopy (EDS). Iron, Co, Ni, Cr, V, Ti, and Nb were chosen as alloying elements according to the AB₂ structure map or the atomic size factor. The studied MoSi₂ base alloys were prepared by the arc melting process from high-purity metals. The EDS analysis showed that Fe, Co, and Ni have no solid solubility in as-cast MoSi₂, while Cr, V, Ti, and Nb exhibit limited solid solubilities, which were determined to be 1.4±0.7, 1.4±0.4, 0.4±0.1, and 0.8±0.1. Micro-structural characterization indicated that Mo-Si-M_VIII (M_VIII=Fe, Co, Ni) and Mo-Si-Cr alloys have a two-phase as-cast microstructure, i.e., MoSi₂ matrix and the second-phase FeSi₂, CoSi, NiSi₂, and CrSi₂, respectively. In as-cast Mo-Si-V, Mo-Si-Ti, and Mo-Si-Nb alloys, besides MoSi₂ and C40 phases, the third phases were observed, which have been identified to be (Mo, V)₅Si₃, TiSi₂, and (Mo, Nb)₅Si₃.     

中频反应溅射SiO2膜与直流溅射ITO膜的在线联镀

多数ITO透明导电玻璃生产线在实现SiO2膜与ITO膜在线联镀时，应用SiO2靶射频溅射沉积SiO2膜工艺和ITO靶直流溅射沉积ITO膜工艺，如果SiO2膜应用硅靶反应磁控溅射工艺，存在这种工艺是否可以与ITO靶直流溅射沉积ITO膜工艺在线联用以及如何实现联用的问题。作者对现有的生产线进行了改造设计、加工，做了大量实验、质谱分析和多项测试研究，成功地实现反应溅射SiO2膜与ITO膜在线联镀，做到SiO2镀膜室的工作状态的变化基本上不影响ITO镀膜室的工艺条件。     

Parameter evaluation in automated digital deep-level transientspectroscopy (DLTS)

A method of directly evaluating the activation energy ΔE, capture cross section σ, and density N_T, of deep-level traps from the pulsed reverse bias capacitance transient is described. The main advantages of this technique are that it requires only a single temperature scan, and it can resolve nonexponential transients due to closely-spaced energy levels. The test samples used for this paper consisted of Schottky diodes fabricated on nonirradiated and 1-MeV electron-irradiated n-type VPE (vapor-phase epitaxy) GaAs wafers. The well known EL2 trap was identified with ΔE of 0.81 eV, and σ _n of 1.0×10^-13 cm² for the nonirradiated sample. These values were found to be in good agreement with published data using established, conventional DLTS techniques. For the irradiated samples a nonexponential capacitance transient was found in the EL2 range of temperatures. The discussed technique was able to resolve two closely spaced deep levels lying at E_c-0.81 eV and E_c-0.84 eV, and with capture cross sections of 1.5×10^-13 cm² and 2.5×10^-12 cm², respectively     

A newly robust controller design for the position control ofpermanent-magnet synchronous motor

A robust controller which is designed by employing variable-structure control and linear-quadratic method is presented for a permanent-magnet synchronous motor (PMSM) position control system. It is to achieve accurate control performance in the presence of plant parameter variation and load disturbance. In addition, it possesses the design flexibility of the conventional state feedback control. It is applied to the position control of a PMSM. Simulation and experimental results show that the proposed approach gives a better position response and is robust to parameter variations and load disturbance