A novel FSK demodulation method using short-time DFT analysis forLEO satellite communication systems

This paper proposes a novel frequency-shift keying (FSK) demodulation method using short-time discrete Fourier transform (ST-DFT) analysis for low-Earth-orbit (LEO) satellite communication systems. The ST-DFT-based FSK demodulation method is simple and robust to a large and time-variant frequency offset because it expands the received signal in a time-frequency plane and demodulates it only by searching the instantaneous spectral peaks with no complicated carrier-recovery circuit. Two kinds of demodulation strategies are proposed: a bit-by-bit demodulation algorithm and an efficient demodulation-algorithm frequency-sequence estimation (FSE) based on the Viterbi algorithm. In addition, in order to carry out an accurate ST-DFT window synchronization, a simple DFT-based ST-DFT window-synchronization method is proposed     

Efficient weighted least-squares algorithm for the design of FIRfilters

The weighted least-squares (WLS) technique has been widely used for the design of digital FIR filters. In the conventional WLS, the filter coefficients are obtained by performing a matrix inverse operation, which needs computation of O(N³). The authors present a new WLS algorithm that introduces an extra frequency response including implicitly the weight function. In the new algorithm, the filter coefficients can be solved just by a matrix vector multiplication. It reduces the computational complexity from O(N³ ) to O(N²)     

On fixed-database universal data compression with limited memory

The amount of fixed side information required for lossless data compression is discussed. Nonasymptotic coding and converse theorems are derived for data-compression algorithms with fixed statistical side information (“training sequence”) that is not large enough so as to yield the ultimate compression, namely, the entropy of the source     

Reconstruction of a signal using the spectrum-reversal technique

Our procedure of real-zero conversion uses a spectrum-reversal technique to convert the information of a bandlimited signal to real zeros. We conducted a simple reconstruction experiment and showed that our proposed method is essentially equivalent to the conventional technique of sine-wave crossings     

Athermal silica-based arrayed-waveguide grating multiplexer

A temperature dependent channel wavelength shift in a silica-based arrayed-waveguide grating multiplexer is successfully suppressed from 0.95 to 0.05 nm in the 0-85°C temperature range, which means that it can be used in practical WDM systems without the need for temperature control     

Interface structure in arsenide/phosphide heterostructun grown by gas-source MBE and low-pressure MOVPE

We have used cross-sectional scanning tunneling microscopy (STM) to study interface structure in arsenide/phosphide heterostructures grown by gas-source molecular beam epitaxy (GSMBE) and by low-pressure metalorganic vapor phase epitaxy (LP-MOVPE). High-resolution images of GSMBE samples consisting of GaAs interrupted at 200Å intervals with a 40 s P₂ flux reveal substantial, growth-temperature-dependent incorporation of phosphorus with nanometer-scale lateral variations in interface structure. STM images of InGaAs/InP multiple quantum well structures grown by LP-MOVPE show evidence of interface asymmetry and extensive atomic cross-incorporation at the interfaces. Data obtained by STM have been corroborated by high-resolution x-ray diffraction and reflection high-energy electron diffraction. Together, these studies provide direct information about nanometer-scale grading and lateral nonuniformity of arsenide/phosphide interfaces that can occur under these growth conditions.     

InxGa1−xAs ohmic contacts to n-type GaAs with a tungsten nitride barrier

Significant reduction of the contact resistance of In_0.7Ga_0.3As/Ni/W contacts (which were previously developed by sputtering in our laboratory) was achieved by depositing a W₂N barrier layer between the Ni layer and W layer. The In_0.7Ga_0.3 As/Ni/W₂N/W contact prepared by the radio-frequency sputtering technique showed the lowest contact resistance of 0.2 Ωmm after annealing at 550°C for 10 s. This contact also provided a smooth surface, good reproducibility, and excellent thermal stability at 400°C. The polycrystalline W₂N layer was found to suppress the In diffusion to the contact surface, leading to improvement of the surface morphology and an increase in the total area of the In_xGa−As between metal and the GaAs substrate. These improvements are believed to reduce the contact resistance.     

Strain effects in CdTe (111) epitaxial layers grown on GaAs (100) substrates by molecular beam epitaxy

Spectroscopic ellipsometry and photoreflectance measurements on CdTe/GaAs strained heterostructures grown by moleculclr beam epitaxy were carried out to investigate the effect of the strain and the dependence of the lattice parameter on the CdTe epitaxial layer thicknesses. Compressive strains exist in CdTe layers thinner than 2 μm. As the strain increases, the value of the critical-point energy shift increases linearly. These results indicate that the strains in the CdTe layers grown on GaAs substrates are strongly dependent on the CdTe layer thickness. Author to whom all correspondence should be addressed.     

Modulation and Equalisation Considerations for High Performance Radio LANs

The European Telecommunications Standards Institute (ETSI) has recently defined a European standard for a high performance radio LAN (known as HIPERLAN). To operate as wired LAN replacements, these systems will operate at 5.2 GHz and support instantaneous bit rates of just under 24 Mb/s. To counteract the time dispersive nature of the indoor radio channel, the use of adaptive equalisation is suggested. In this paper a number of possible modulation and equalisation techniques are presented and, in particular, the Bit Error Rate (BER) performance of quasi-coherent GMSK combined with Decision Feedback Equalisation is explored through computer simulation. The trade off between symbol spaced and fractionally spaced equalisation is considered together with the importance of feedfoward and feedback synchronisation to the channel's power delay profile. The paper also includes a comparison of the RLS and LMS based training algorithms and compares the modem developed under the ESPRIT III LAURA project with that specified in HIPERLAN.The application of dual antenna diversity is investigated and its impact on the number of received error free data packets obtained as a function of signal leval and rms delay spread. The use of such diversity is shown to greatly improve the BER performance of a HIPERLAN modem. The problem of frequency offset is considered and modifications are proposed to the HIPERLAN frame structure to improve the receiver's tolerance to such errors. Important practical issues such as frame and symbol synchronisation, frequency offset correction and hardware implementation are discussed from both the LAURA and HIPERLAN viewpoint.