电沉积Ni-W合金镀层的X射线光电子能谱分析

采用X射线光电子能谱（XPS）对电沉积Ni-W合金镀层表面膜进行了分析。研究结果表明，Ni-W合金镀层表面存在一层薄的氧化膜，而钨的氧化作用远大于镍，Ni-W合金镀层中W含量的提高对耐蚀性起决定作用。     

非串行生产线的建模,分析及设计

本文利用等效工作站理论和工件流平衡原理，推导出非串行离散事件生产线可以等价于串联系统，并归结为装配和拆卸两条定理，解决了系统的建模、分析与设计问题。     

G.652光纤长途传输系统的色散补偿

针对当前国内长途传输光缆系统在扩容过程中，因光信号色散而影响传输质量的现象，结合实际工程建设，分析了光信号色散的危害及其成因，并提出了相应的解决办法及建议。     

Nutrient removal performance of an anaerobic–anoxic–aerobic process as a function of influent C/P ratio

The laboratory scale anaerobic–anoxic–aerobic (A²O) process fed with synthetic brewage wastewater was designed to investigate the effects of changing feed C/P ratio on the performance of biological nutrient removal (BNR) processes. In the experiment, the influent chemical oxygen demand (COD) concentration was kept at approximately 300 mg L^?1 while the total phosphorus concentration was varied to obtain the desired C/P ratio. Results showed that when the C/P ratio was lower than 32, phosphorus removal efficiency increased as C/P ratio increased linearly, while when the C/P ratio was higher than 32, the P removal efficiency was maintained at 90–98%, and effluent P concentration was lower than 0.5 mg L^?1. However, regardless of the C/P ratio, excellent COD removal (90% or higher) and good total nitrogen removal (75–84%) were maintained throughout the experiments. It was also found that very good linear correlation was obtained between COD uptake per unit P released in the anaerobic zone and C/P ratio. In addition, the P content in the wasted activated sludge increased with the decrease in the C/P ratio. Based on the results, it was recommended that the wastewater C/P ratio and its effects be incorporated into BNR design and operational procedures, appropriate C/P ratios were used to achieve the effluent treatment goals. Copyright © 2005 Society of Chemical Industry     

基于局部差别的形态学边缘检测方法研究

图像边缘特征是图像最基本也是最重要的特征之一.图像边缘特征的提取一直是计算机视觉和图像处理领域的经典研究课题,在精确制导武器的制导图预处理中有着广泛地应用.针对经典的边缘检测算子不能很好地提取噪声图像边缘这一问题,在数学形态学的基础上,提出了一种边缘提取方法.利用局部差别准则确定图像中受噪声影响的像素点,并对其进行形态学操作,滤除噪声,保存边缘.实验表明,该算法不仅具有很好的边缘提取能力,还具有很强的抗噪能力.说明了该算法的有效性和实用性.     

高频脉冲电铸Ni-Co纳米复合块体微观结构分析

采用高频脉冲电铸工艺制备出了镍钴纳米复合块体材料，利用场发射扫描电镜、能谱和X射线衍射的方法，重点研究了复合块体沉积层的表面形貌、相结构和结晶取向。结果表明．高频率和润湿剂的添加对沉积层的细化有重要影响，高频脉冲电铸能够获得微观组织致密、均匀的复合块体材料。     

用于光控相控阵雷达的空间光调制器

空间光调制器是光信息处理机的基本结构单元,它能根据电驱动信号或光驱动信号,随时修正与空间和时间有关的读出光束的偏振、相位和幅度.介绍了适用于光控相控阵雷达系统的空间光调制器,包括它们的结构、原理和性能.     

锂离子电池正极材料锂锰氧化物的固相合成研究进展

阐述了固相合成反应的原理，综述了锂锰氧化物的几种固相合成方法，并着重介绍了熔融渍法，多步加热法，机械化学法和微波化学法等在锂锰氧化物合成中的研究进展。     

安全:爆破工程永恒的主题——2001年重大拆除爆破工程回顾

通过对2001年我国重大拆除爆破工程的回顾,认为在提高大面积毫秒非电起爆网络可靠性,控制爆破震动、扬尘、噪声等环境影响,与机械清理配合,实现快速施工等方面取得了进展与突破;对几起爆破安全事故进行了初步分析.为保证拆除爆破工程安全,在加强理论研究、开展技术创新、建立科学有序的管理制度等方面提出了建议意见.