Transition metal- chalcogen systems XI: the platinum- selenium phase diagram

The platinum-selenium phase diagram was investigated by differential thermal analysis, metallography, and X-ray powder diffraction methods. The two previously known intermediate phases, Pt₅Se₄ and PtSe₂, both melt congruently: Pt₅Se₄ at ∼1070 °C and PtSe₂ (under its own vapor pressure) at 1245 ± 10 °C. Pt₅Se₄ forms a eutectic with Pt at 1065 ± 2 °C and ∼42 at % Se and another one with PtSe₂ at 1067 ± 2 °C and somewhat below 45 at.% Se. On cooling, Pt and PtSe₂ form a metastable eutectic at 1037 ± 2 °C and ∼43 at % Se. Between PtSe₂ and Se, a degenerate eutectic was found at 221 °C, which also indicates negligible solubility of platinum in solid selenium.     

Fatigue behaviour of a phenolic matrix composite

This paper presents results of a fatigue life investigations carried out in plate specimens of a fibre-glass-reinforced phenolic matrix composite. Tensile and Young's modulus data were obtained at four different testing temperatures (room temperature, 100, 150 and 200 °C). The fatigue S−N data were obtained at room temperature only and for two stress ratio values (R=0 and 0.4). Fatigue and tensile behaviour was assesesed in the composite with the fibres aligned in the longitudinal loading direction. The results were obtained for two values of volume fraction (0.28 and 0.42) and three different glass surface treatments. A detailed comparison of fatigue results is given taking into account several fatigue parameters and also the testing variables. Results of observations of SEM fracture surfaces are also presented.     

换热网络数值模拟稳定性分析

换热网络的数值模拟在换热网络的定量分析中起着重要作用。但在模拟计算中,有时表现出数值稳定性差。提高数值稳定性的方法,目前多通过改善算法来实现。本文通过对换热网络数值模拟的误差分析,提出了误差放大因子的概念,并依此选择迭代变量。通过对迭代变量的选择,达到提高换热网络数值模拟稳定性的目的。     

IEA joint trials: New lessons from old plantations

Two international trials of potential biomass species families and clones planted in 1985 have been analyzed to determine changing patterns in growth, diseases, and insects. In the Swedish trial, with close spacing and short rotations, Salix viminalis clones gave the best average yield of 17.4 Mg/Ha/yr on the first coppice rotation. In the Minnesota, USA trial, with wider spacings and a longer rotation Populus alba hybrid clones gave the best average yields of 5.5 Mg/Ha/yr. The most important disease and insect problems encountered were Septoria musiva stem cankers on some Populus clones; frost die back in some Salix clones; and the leaf blotch miner, Fenusa dohrnii, on most Alnus families. Recommendations for future international cooperation in field trials are presented.     

校企合作是高等职业教育改革与发展的必由之路

校企合作是高等职业教育发展的重要趋势之一,是与现代化大生产、现代科学技术和现代高等教育发展相适应的一种客观要求.加强校企合作已成为高职院校制定面向21世纪发展战略的重要内容.高校和企业联合举办高职学院是新的发展时期对校企合作认识的深化,也是高校和企业之间开展全方位和深层次合作的最佳切入点.文章所阐述的校企合作主要指在人才培养、科学研究、技术开发、生产经营以及资源综合利用等多方面的协作.     

On the Protective Properties of Electrostatically Spraged Fluoroplastic and Epoxy Coatings

The protective and insulating properties of fluoroplastic and epoxy coatings applied by high-voltage electrostatic spraying were studied. The epoxy coatings were found to be less permeable than the fluoroplastic ones, yet they cannot be used to protect metal parts in corrosive environment because of their low chemical resistance.     

Electrical characterization of porous BaTiO3 using impedance spectroscopy in humid condition

The humidity response characteristics of La doped BaTiO₃ with different sintered densities and room temperature electrical conductivities were investigated using complex impedance measurement. The samples with low density and high resistivity showed the large and nearly linear sensitivity to the change of humidity. The impedance spectra of samples, when exposed to high humidity, can exhibit microstructure-related features, even though they do not give rise to a noticeable characteristic change when exposed to low humidity. The observed impedance patterns were dependent upon the density, and hence the oxidation kinetics of BaTiO₃.     

聚苯硫醚酰胺的合成与表征

用4-氯苯甲酰4′-氯苯胺和硫化钠为原料在常压下合成了聚苯硫醚酰胺,并对其进行了表征。结果表明所合成的产物为结晶性聚合物,并且有较高的热稳定性。     

采用先进技术提高装置运行水平

介绍了中国石油化工股份有限公司高桥分公司 1.4Mt/a同轴式重油催化裂化装置的特点和生产情况。为了满足市场需求 ,提高经济效益 ,几年来在该装置上又采用了一些新技术 ,使装置的运转水平进一步提高。如应用降烯烃催化剂GOR Q ,与使用MLC 5 0 0催化剂相比 ,汽油烯烃体积含量约 30 % ,下降 8～ 10个百分点 ;汽油辛烷值基本不变 ;产品分布改善 ;液体收率增加 ;柴油性质变化不大。又如最大量烷烃异构化 (MIP)新型提升管反应系统的应用 ,与常规催化裂化相比 ,产品分布相当 ,汽油的烯烃体积含量下降至 30 %～ 35 % ,MON增加 0 .5～ 0 .8个单位 ,RON下降幅度不大于 0 .5个单位