A Study of AlN Films Prepared by Arc Ion Plating

Hexagonal AlN films have been obtained by arc ion plating at different negative biases ,X-ray diffraction and scanning electron microscopy results show that AlN films with smooth surfaces and (002) preferred orientation are obtained at low biases ,whereas those with coarse surfaces and (100) preferred orientation are obtained at high biases,The formation mechanism of AlN is analyzed and the experiment results are discussed,The effect of bias on adhesion strength has also been examined.     

带有块间串扰MC-CDMA的时域信道估计和多用户检测

本文把带有IBI的MC-CDMA系统等效解释为特殊的直接序列码分多址（DS-CDMA）系统，并给出了相应的时域信道估计方法和时域线性最小均方误差（MMSE）多用户检测方法。仿真实验表明了本文方法的性能。     

固体火箭发动机喷管用C/C复合材料的研究进展

C/C复合材料已成为固体火箭发动机(SRM)最理想的喷管材料。综述了国内外SRM喷管用C/C复合材料的研究进展、应用状况以及烧蚀性能的研究状况,展望了今后C/C复合材料喷管的发展趋势。     

液化气催化氧化脱硫工艺的工业应用

介绍了MOYOX法液化气催化氧化脱硫工艺的工业应用情况。应用结果表明，该工艺流程简单，操作灵活，脱硫效果显著，硫含量可降至3mg／m^3，含硫平均脱除率由74．2％提高为97．7％，铜片腐蚀也得到了明显改善。     

110kV变电站35kV高压系统边运行边改造实践

对宣钢供电系统110kV变电站35kV高压系统边运行边施工改造经验进行了分析探讨。指出选用优良的设备、制定周密的安全措施，能够确保施工、运行安全。     

Analytical modeling and experimental study of tensile strength of asphalt concrete composite at low temperatures

In this study, analytical modeling of the tensile strength of hot-mix asphalt (HMA) mixtures at low temperatures was developed. To do this, HMA mixtures were treated as a two-phase composite material with aggregates (coarse and fine) dispersed in an asphalt mastic matrix. A two-phase composite model, which was similar to Papanicolaou and Bakos's [J. Reinforced Plast. Compos. 11 (1992) 104] model with a particle embedded in an infinite matrix, was proposed. Unlike Papanicolaou and Bakos's model, an axial stress was introduced to the fiber end to consider the load transferred from the asphalt mastic the aggregate. Efforts were also made to consider the effect of aggregate gradation, asphalt mastic degradation, and interfacial damage between the aggregates and asphalt mastic matrix on the tensile strength of the HMA mixtures. Experimental investigations were conducted to validate the developed theoretical relations. A reasonable agreement was found between the predicted tensile strength and the experimental results at low temperatures. Parameters affecting the tensile strength of asphalt mixtures were discussed based on the calculated results.     

基于LED与肌肉模型的特定人脸建模与动画

特定三维人脸的建模与动画是计算机图形学中一个非常令人感兴趣的领域.本文提出了一种新的从两幅正交照片建立特定人脸的模型以及动画方法,首先以主动轮廓跟踪技术snake自动获取人脸特征点的准确位置,然后以文中的局部弹性变形(local elastic deformation)方法进行通用人脸模型到特定人脸的定制,并辅以采用图像镶嵌技术生成的大分辨率纹理图像施行纹理绘制,该方法以特征点的位移和非特征点与特征点的相对位置为基础计算局部人脸面部的变形,同时还能够实现人脸剧烈的面部变化和动作,与肌肉模型相结合,可很好地实时完成人脸的动画,具有快速高效的特点.最后,给出了所得到的实验结果.     

穿孔顶头表面氧化膜浅析

分析了穿孔顶头表面氧化膜的形成过程、性质、作用、界面行为，以及对顶头使用寿命的影响。指出了提高该氧化膜耐久性的途径。     

Numerical Simulation of Independent Advance of Ore Breaking in the Non-pillar Sublevel Caving Method

The mechanism of stress generation and propagation by detonation loading in five separate independent advance of ore breaking patterns is discussed in the paper. An elastic numerical model was developed using AN- SYS/LS-DYNA 3D Nonlinear Dynamic Finite Element Software. In this package ANSYS is the preprocessor and LS-DYNA is the postprocessor. Numerical models in the paper to actual were l：10 and the element mesh was dissected in scanning mode utilizing the symmetry characteristics of the numerical model. Five different advance rates were studied. Parameters, such as the time required to maximum stress, the action time of the available stress, the maximum velocity of the nodes, the stress penetration time, the magnitude of the stress peak and the time duration for high stress were numerically simulated. The 2.2 m advance appeared optimum from an analysis of the simulation results. The results from numerical simulation have been validated by tests with physical models.     

济钢第一炼钢厂降低钢铁料消耗实践

济钢第一炼钢厂通过优化入炉原料结构,改进冶炼工艺,实施少渣炼钢,有效减少了转炉吹损,降低了钢铁料消耗成本,2002年增加炼钢综合经济效益3100多万元。