基于ARM Cortex-M3的某新型装备信息采集系统设计

根据某新型装备特点,介绍了一种基于ARM Cortex-M3和SD卡的数据采集系统的硬件设计和软件设计;硬件部分包括信号调理电路、微控制器外围电路和SD卡接口电路3个方面;其中微控制器是基于ARM Cortex-M3微处理器设计的STM32F205VG,该设计采用微控制器自带的ADC模数转换器完成模数转换;软件部分包括系统软件和应用软件两部分,其中系统软件主要有主程序模块、初始化程序模块等;应用软件主要有信息采集、SD卡读写程序等;该系统设计采用ARM微处理器,充分利用了ARM的低功耗、高效率、体积小的优点,具有广泛的应用前景.     

大功率电机控制器和驱动器测试装置的研究

论文介绍了大功率三相无刷电机信号控制器LHB541和无刷电机功率驱动器LHB542测试原理和方法。利用数字电路设计了一种三相方波信号发生装置,考虑到被测器件的功率及测试效率及可靠性而设计制作了相应的测试装置。从而满足了LHB541和LHB542各项参数测试的要求,同时为类似大功率器件测试提供了一种技术参考。     

基于半实物仿真的效能评估系统设计

针对通信系统的效能评估提出了一种半实物仿真系统的设计及实现方式,综合分析了国外半实物仿真系统的发展状况和研究成果。提出了一种可行的半实物仿真系统的总体框架和系统组成,详述了半实物仿真系统中核心设备一节点云模拟器和电台半实物仿真设备的设计和实现思路,最后描述了以此半实物仿真系统为基础构建的通信系统效能评估系统,并给出系统所具备的测试能力。     

N皇后问题独立解算法研究和仿真实现

根据N皇后可行解的七种对称关系,提出求N皇后问题独立解的算法,并验证算法的可行性和正确性。建立求解N皇后问题的仿真软件,验证N皇后问题全解和独立解个数约8:1的数学关系。     

全定制心电采集的模拟集成电路设计

设计和实现了一种应用于健康监测设备的采集心电信号的模拟集成电路(IC)。该电路系统包括集成了右腿驱动电路的仪表放大器,二阶有源低通滤波器,第二级放大电路,高电源抑制比(PSRR)的低压差线性稳压电源(LDO)以及导联脱落检测电路。与其他已有的方案相比,该全定制模拟集成电路系统集成了工业级应用所需要的全部功能,并且表现出更好的共模抑制和电源抑制性能。芯片采用SMIC0.18μmCMOS工艺流片,且已完成测试,通过电极成功采集到人体心电信号。测试结果表明,该模拟IC实现了在0.5~100Hz带宽内51dB的增益,系统的共模抑制比和电源抑制比为75dB和90dB。在2.9V~5.5V电源电压下正常工作时,芯片消耗190μA的电流。     

基于插件的可扩展战场态势展现框架的设计与实现

战场态势是作战决策的依据,是交战双方指挥员关注的焦点。针对多源态势可视化显示的实际需求,本文提出了一种可扩展开放图形框架XOGF(eXtend Open Graphic Frame),用于有效管理和集成基于态势图的业务处理模块,实现基于同一幅态势图的战场态势可视化显示。通过实际应用表明,XOGF能够有效解决多源战场态势的组合显示问题。     

Novel slotted stepped‐impedance resonator and its application to compact and high performance bandpass filter and diplexer design

By etching slots in the low‐impedance section of the conventional stepped‐impedance resonator, a novel slotted stepped‐impedance resonator (SSIR) is proposed. As two examples, a fourth‐order bandpass filter (BPF) operating at 1 GHz with a size of 0.078 λ_g × 0.062 λ_g and a miniaturized diplexer operating at 0.9/1.57 GHz with a size of 0.054 λ₀ × 0.086 λ₀ are designed based on the proposed SSIR. The fabricated BPF exhibits a high selectivity and a wide ?30 dB rejection upper stopband from 1.13 f₀ to 6.52 f₀, while the fabricated diplexer has up to ?60 dB output isolation. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2013.     

Universal algorithms for solving the matrix Bellman equations over semirings

This paper is a survey on universal algorithms for solving the matrix Bellman equations over semirings and especially tropical and idempotent semirings. However, original algorithms are also presented. Some applications and software implementations are discussed.     

A model based transformation paradigm for cross-language collaborations

Online collaboration is a big challenge in the field of international product development in a cross-language environment. It serves two purposes: cross-language translation and design requirement clarification. Though many approaches and tools are developed for each of the purposes, not a solution serves both of them well. Especially, the traditional statistical methods for cross-language translation cannot preserve the whole semantic information, which intend to incur misunderstanding and ineffective collaboration. This results in potential problems in clarifying the design requirements. In this paper, we proposed a method to online collaboration, named Cross-Language Transformation based on Recursive Object Model (CLT-ROM). The proposed method consists of two steps. Firstly, a natural language sentence is transformed into a source ROM diagram. Secondly, a corresponding target ROM diagram is generated by a transformation algorithm. The proposed method is a model-based communication tool which facilitates collaborations. Since the ROM has been proven effective in requirements clarification, some examples are given to illustrate that the CLT-ROM has a good capability of semantic preserving in requirement engineering for product development.     

Removal of endocrine disrupting chemicals in a large scale membrane bioreactor plant combined with anaerobic-anoxic-oxic process for municipal wastewater reclamation

The removal of eight typical endocrine disrupting compounds (EDCs) in a full scale membrane bioreactor combined with anaerobic-anoxic-oxic process (A(2)/O-MBR) for municipal wastewater reclamation located in Beijing was investigated. These EDCs, including 4-octylphenol (4-OP), 4-n-nonylphenol (4-n-NP), bisphenol A (BPA), estrone (E1), 17α-estradiol (17α-E2), 17β-estradiol (17β-E2), estriol (E3) and 17α-ethinylestradiol (EE2), were simultaneously analyzed by gas chromatography/mass spectrometry after derivatization. The concentrations of eight EDCs were also measured in sludge of anaerobic, anoxic, oxic and membrane tanks to measure sludge-water distribution coefficients (K(d) values) as the indicator of adsorption propensity of target compound to sludge. The removal efficiencies of EDCs reached above 97%, except for 4-n-NP removal efficiency of 72%, 4-OP removal efficiency of 75% and EE2 removal efficiency of 87% in the A(2)/O-MBR process. The high K(d) values indicated that the sludge had a large adsorption capacity for these EDCs, and significantly contributed to removal of EDCs. Yeast estrogen screen assay was performed on samples to assess the total estrogenic activity by measuring the 17β-E2 equivalent quantity (EEQ), expressed in ng-EEQ/L. The measured EEQ value was markedly reduced from 72.1 ng-EEQ/L in the influent to 4.9 ng-EEQ/L in the effluent. Anoxic tank and anaerobic tank contributed to 80% and 37% in total EEQ removal, respectively.