均衡营养早餐的研制

根据膳食营养的要求,以燕麦、爆裂玉米、奶粉、鸡胸肉、胡萝卜和香菜为原料,采用微波技术和冷冻干燥技术生产均衡营养早餐,确定了最佳的配方为燕麦片15g、爆裂玉米8g、奶粉10g、鸡肉丁5g、胡萝卜丁0.5g、香菜干0.5g、盐或糖1g.     

海底天然气渗漏地震探测方法的研究进展

海底天然气渗漏可以指示沉积层中的烃类聚集带，渗漏出的大量气体（主要是甲烷）还可能影响全球的气候变化。此外，与海底渗漏相关的浅层气改变了海底沉积物的土工性质，可能对海底工程构成威胁。因此对海底天然气渗漏进行研究意义重大。在海底渗漏探测方面，地震是一种有效的方法，它不仅能反映深部构造，为海底渗漏提供气体来源和运移通道信息；而且还可以直接用来寻找渗漏相关特征，为海底观测和取样提供依据。在地震剖面上，与海底天然气渗漏相关的浅层气表现为声混浊、声空白、亮点、多次波、速度下拉、气烟囱等特征，泥火山、泥底辟表现为隆起的地震透明带，而麻坑则表现为“V”字形截面和半透明状地震混浊。     

基于小波算法的摆式列车倾摆指令实时提取

由于摆式列车线路检测系统测得的线路超高时变率信号是平稳的且含有幅度大、频带宽的噪声 ,难以用常规的滤波方法得到摆式列车实时倾摆指令。本文介绍了多分辨率分析的基本原理及快速算法 ,讨论了基函数的选取 (构造 )原则。根据超高时变率信号的特征 ,合理选择基函数 ,提出了一种对流式数据的实时滤波算法 ,通过对仿真和线路试验实测数据的处理与常规滤波方法进行了比较。结果表明 ,该算法能更快地实时提取摆式列车倾摆指令。     

Control of structure and tack properties of acrylic pressure‐sensitive adhesives designed by a polymerization process

Free radical emulsion polymerization of methyl methacrylate (MMA) and 2‐ethylhexyl acrylate (EHA) results in the synthesis of pressure‐sensitive adhesives (PSAs) with good tack properties. Management of both the copolymer composition and the polymerization process allows one to control the behavior of the PSA. Semicontinuous (SC) processes create polymer particles whose instantaneous composition is close to that of the feed particle The SC Mixture process (continuous feeding with comonomer blends) affords nearly homogeneous latex particles and PSA films. The SC Gradient process (separate feedings at inversely varying rates) affords heterogeneous particles and films. The Batch process leads to somewhat heterogeneous films, but the hard (MMA‐rich) microdomains are made compatible with their soft (EHA‐rich) matrix because of the assumed formation of tapered‐type copolymers. Tack measurements indicate the importance of the particle and film structures. Too much hardness or softness leads to unacceptable lacks of adhesion and cohesion, respectively. Homogeneous structures prove adequate, but their tack properties collapse with rising temperature. Heterogeneous structures, with extensive phase segregation, prove unsatisfactory because they lack adhesion and cohesion. Finally, the association of well‐balanced composition and compatible heterogeneity is the criterion for suitable PSA behavior. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2749–2756, 2003     

2.5Gb/s和3.125Gb/s速率级0.35μmCMOS限幅放大器

采用了TSMC0.35μm CMOS工艺实现了可用于SONET/SDH2.5Gb/s和3.125Gb/s速率级光纤通信系统的限幅放大器。通过在芯片测试其最小输入动态范围可达8mVp—p，单端输出摆幅为400mVp-p，功耗250mW，含信号丢失检测功能，可以满足商用化光纤通信系统的使用标准。     

Bottlenecks and strategies of green mold compounds

The mold compound protects integrated circuit (IC) devices from the environmental attacks (e.g., moisture, contaminants) for its lifetime. Driven by market pressure, environmental regulations, the electronics industry is migrating to provide environmental friendly ("green") products and systems. Two major changes associated with this migration are elimination of lead and toxic halogens from the products. Thus, the halogen-free mold compound will be a part of the "green" IC package. The migration to lead-free electronics impacts the current nongreen IC packaging technology, cost and reliability of manufacturers. This article presents the technology challenges and development trend that manufacturers and end users are facing right now with the introduction of green mold compounds.     

数据挖掘技术在大坝安全决策支持系统中的应用

数据挖掘技术是一个新兴的，具有广阔应用前景和极富挑战性的研究领域。在充分研究大坝安全决策支持系统的基础上，结合数据挖掘技术的概念与方法等，对数据挖掘技术在大坝安全决策支持系统中的应用进行论述，与此同时，运用数据挖掘技术分析了某大坝垂直位移测值突变的物理成因。     

基于移动端多天线系统的无线衰落信道模型

根据当前无线移动通信对多天线移动接收端性能仿真的要求，讨论并建立了适于空时信号处理的移动端矢量信道模型。通过分析无线移动信道特点。研究了影响接收信号幅度相位的诸多因素，建立了相应的数学模型。并对随机参数选取进行了探讨。其中考虑到移动端接收信号到达角扩散的特点，采用GBSB椭圆模型产生了适于移动端接收信号仿真的随机角度，改进了一种瑞利衰落生成算法。最后信道的数值仿真结果符合理论和经验。同时，通过TD-SCDMA系统链路级仿真，也证明了该信道模型的有效性。     

Low RF noise and power loss for ion-implanted Si having an improved implantation process

Very-low-transmission line noise of <0.25 dB at 18 GHz and low power loss /spl les/0.6 dB at 110 GHz have been measured on transmission lines fabricated on proton-implanted Si. In contrast, a standard Si substrate gave much higher noise of 2.5 dB and worse power loss of 5 dB. The good RF integrity of proton-implanted Si results from the high isolation impedance to ground, as analyzed by an equivalent circuit model. The proton implantation is also done after forming the transmission lines at a reduced implantation energy of /spl sim/4 MeV. This enables easier process integration into current VLSI technology.