Application of Support Vector Machines in Assessing Conceptual Cost Estimates

Total conceptual cost estimates and the assessment of the quality of these estimates are critical in the early stages of a building construction project. In this study, the support vector machine (SVM) model for assessing the quality of conceptual cost estimates is proposed, and the application of SVM in construction areas is investigated. The results show that the SVM model assessed the quality of conceptual cost estimates slightly more accurately than the discriminant analysis model. This shows that using the SVM has potential in construction areas. In addition, the SVM model can assist clients in their evaluation of the quality of the estimated cost and the probability of exceeding the target cost, and in their decision on whether or not it is necessary to seek a more accurate estimate in the early stages of a project.     

Fixed point theorem-based iterative learning control for LTV systems with input singularity

In this paper, we address a challenging and open problem: how to design a suitable iterative learning control (ILC) system in the presence of input singularity, which is incurred by the singularities of the system direct feed-through term. Considering two typical types of input singularities, we first revise the ILC operators accordingly by adding a forgetting factor and incorporating a time-varying learning gain, in the sequel guarantee ILC operators to be contractible. Next, using the Banach fixed-point theorem, we demonstrate that the output sequence can either enter and remains ultimately in a designated neighborhood of the target trajectory, or is bounded by a class K function. Finally, an illustrative example is presented.     

含V、N无缝钢管表面外折缺陷产生原因的分析

通过对鞍钢生产的部分批号V、N微合金强化无缝钢管及生产该钢管的原料连铸坯和连轧管坯的表面缺陷进行研究，分析了含V、N钢管表面外折缺陷的成因，提出了改善钢管表面质量的方法。采用改进后工艺生产的无缝管，其表面外折废品量大幅度降低。     

项目管理软件的开发思路

详细介绍了项目管理的发展及项目管理软件的现状。通过对P3管理软件的分析论述，得出项目管理软件系统的开发方案。     

Novel Hyperbranched predominantly Alternating Copolymers Made From A Charge Transfer Complex monomer pair of p-(chloromethyl)styrene and Acrylonitrile via Controlled Living Radical Copolymerization

Summary Novel hyperbranched copolymers were successfully synthesized by the controlled charge transfer complex inimer and living radical copolymerization of p-(chloromethyl)styrene (PCMS) and acrylonitrile (AN). The resulting copolymers were characterized by SEC, NMR, FTIR, DSC and elemental analysis etc.. The influences of reaction conditions, such as the polymerization temperature, the catalyst (CuBr) concentration and the monomer ratio, on the resulting copolymers were investigated in detail. The monomer reactivity ratios were evaluated to be r_PCMS=0.937 and r_AN=0.088 respectively by the Fineman-Ross method. The higher are the polymerization temperature and the ratio of catalyst to monomer, the higher is the branching degree of the resulting copolymer. When the amount of monomer AN was used in excess than that of the monomer PCMS in the raw feed, the hyperbranched predominantly alternating copolymers HP[PCMS-co-AN] could be obtained. These hyperbranched copolymers were successfully used as functional macroinitiators to synthesize the star-shaped poly(PCMS-co-AN)/poly(MMA) block copolymers.     

非电量微机采集系统

实现水电厂电量快速微机巡回检测，温度采集较其它信号更为困难，本文着重讨论温度信号转换及与微机系统的连接。且介绍某水电厂微机控系统中非电量检测装置的硬件结构和软件编制。     

An effective rhodium catalyst system on the synthesis of acetic acid from methyl formate

Rh/Lil/SnR₄ is an effective catalyst system for the conversion of methyl formate to acetic acid under carbon monoxide pressure. The effects of solvent and initial CO partial pressure on the turnover rate of the reaction were investigated. The possibility of replacing some of the iodide promoters by tin compounds has been probed.     

HYDRODYNAMIC FORCE ON SMOOTH HORIZONTAL CYLINDER IN UNIFORM OSCILLATORY FLOW

ＨＹＤＲＯＤＹＮＡＭＩＣ　ＦＯＲＣＥ　ＯＮ　ＳＭＯＯＴＨ　ＨＯＲＩＺＯＮＴＡＬ　ＣＹＬＩＮＤＥＲ　ＩＮ　ＵＮＩＦＯＲＭ　ＯＳＣＩＬＬＡＴＯＲＹ　ＦＬＯＷＨＹＤＲＯＤＹＮＡＭＩＣＦＯＲＣＥＯＮＳＭＯＯＴＨＨＯＲＩＺＯＮＴＡＬＣＹＬＩＮＤＥＲＩＮＵＮＩＦ...     

Peptide YY inhibition of rat gastric enterochromaffin-like cell function

The present study determined tumorigenicity, tumor classification and DNA damage induced in infant mice by benzo[a]pyrene (B[a]P) or Manufactured Gas Plant (MGP) residues after a single exposure. Male and female B6C3F1 mice were exposed to B[a]P or MGP residue from a single environmental site (MGP-4) and males were also exposed to MGP residue composite from seven different sites (MGP-M7). At 26, 39 and 52 weeks after exposure tumorigenesis was assessed in lung, forestomach and liver. Formation and persistence of DNA adducts were quantified by 32P-postlabeling. Exposure of males to B[a]P induced liver tumors in a dose and time dependent manner. MGP induced more advanced tumors than B[a]P. Only a single liver tumor was found in MGP-4 treated females. No forestomach and few pulmonary adenomas were induced in males or females. MGP-4, MGP-M7 or B[a]P induced DNA adducts in males and females. Adducts in liver, lung and forestomach peaked on different days and decreased at different rates. At 24 h post-exposure, no significant differences in initial DNA adduct levels occurred in males and females exposed to MGP-4 or B[a]P. Lack of DNA damage (adducted DNA) did not account for non-responsiveness of lung and forestomach in B6C3F1 genders as well as in liver in females. MGP tumorigenicity could not be accounted for solely by B[a]P content nor did it reflect additivity of B[a]P and other carcinogenic polycyclic aromatic hydrocarbons (PAHs) in MGP. Synergy among MGP-PAHs, presence of unidentified carcinogens and/or promoters in MGP may account for MGP potency. The B6C3F1 infant male model is a convenient and rapid assay for assessing MGP liver tumorigenicity and potency.     

Ultralow-voltage boron-doped diamond field emitter vacuum diode

A boron-doped diamond field emitter diode with ultralow turn-on voltage and high emission current is reported. The diamond field emitter diode structure with a built-in cap was fabricated using molds and electrostatic bonding techniques. The emission current versus anode voltage of the capped diamond emitter diode with boron doping, sp² content, and vacuum thermal electric (VTE) treatment shows a very low turn-on voltage of 2 V. A high emission current of 1 μA at an anode voltage of less than 10 V can be obtained from a single diamond tip. The turn-on voltage is significantly lower than comparable silicon field emitters