A new test for cleaning efficiency assessment of cleaners for hard surfaces

A new test was developed to assess the efficiency of no-wiping hard-surface cleaning. The test allows cleaner comparisons according to their ability to remove greasy soils. The chosen approach minimizes the mechanical forces applied while cleaning so that the interactions between a detergent solution and the soil to be removed can be characterized. For this, immersion cleaning was chosen, with coated stainless steel as substrate and pigmented oils as the model soil. Several parameters were studied in defined ranges using the Experimental Design method and systematic comparisons. The test shows high reliability on degreasing assessments and is there-fore especially suited to optimization of nonionic surfactant mixes. The originality of the test lies in the possibility of keeping a visual trace of the cleaned substrate appearance by imprinting it on a piece of paper. The validation of the test leads to corroboration of several practical observations. Temperature and agitation play a major role in cleaning efficiency. Detergent solution concentration is a more relevant parameter than pH. Sodium carbonate is shown to have a higher buffering effect than pentahydrated sodium metasilicate. The test is easy to set up, highly sensitive, and can be adapted to solve the problems encountered by formulators of detergent cleaners, such as screening the best ethoxylated fatty alcohol mix for better degreasing properties.     

Rheological properties of hyperbranched polymer/poly(ethylene terephthalate) reactive blends

The rheological properties in solution, in shear and in uniaxial elongation of poly(ethylene terephthalate) (PET) reacted together with hyperbranched polymers (HBPs) were investigated. Two different PET grades, of low and high molecular weights, were compounded with sub‐ to over‐stoichiometric concentrations of HBPs of second and fourth pseudo‐generation, and subsequently subjected to a solid‐state polycondensation (SSP). The formation of microgels, which occurs at high HBP concentration, gave rise to a large increase in melt elasticity and a related decrease in melt strength. At low HBP concentrations, the complex viscosity of the unreacted HBP/PET was considerably reduced, thus demonstrating a lubrication effect of the HBP molecules. During SSP, the intrinsic and shear viscosities exhibited a gradual increase, which was similar for both PET and HBP/PET blends, and was correlated to an increase in molecular weight, through linear‐chain extension and branching reactions. The elongational viscosity of the reactive blends was also increased as a function of reaction time, and this increase was much larger in the case of the HBP/PET blends. A 400% increase in melt strength of the PET was obtained by combining SSP and trace amounts of an HBP of second generation, without any decrease in drawability.     

Preparation of transparent PMMA/Fe(IO3)3 nanocomposite films from microemulsion polymerization

Polymethyl methacrylate (PMMA)/Fe(IO₃)₃ nanocomposite thin films are obtained by in situ particle generation in microemulsions and subsequent photopolymerization of a mixture containing methyl methacrylate, trimethylolpropane triacrylate, and crystallized iron iodate (Fe(IO₃)₃) nanorods. Hyper‐Rayleigh scattering measurements combined with X‐ray diffraction, transmission electron microscopy, and dynamic light scattering are first used to probe in situ the crystallization kinetics of iron iodate nanorods in water‐in‐oil microemulsions prepared with methyl methacrylate as the oil phase and marlophen NP12 as a surfactant. Trimethylolpropane triacrylate is then added as a crosslinker before spin‐coating. Films are deposited on glass substrates for the nonlinear optical characterizations and on silicon wafers for the piezoelectric and mechanical measurements. Nanocomposite films treated by corona discharge are finally characterized through optical microscopy, laser Doppler vibrometry, and Brillouin spectroscopy. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 1203‐1211, 2013     

Effects of the amount of fillers and of the crosslink density on the mechanical behavior of carbon‐black filled styrene butadiene rubbers

Several carbon‐black filled styrene‐butadiene rubbers are subjected to monotonic uniaxial tension tests in order to investigate the effects of the amount of fillers and of the crosslink density on their mechanical properties. The Young modulus, the volume changes associated with material damage and the stretch to failure are extracted and discussed. Results compare well to the literature results when exist and quantitative analysis are proposed when possible. Results show that filled rubbers are not incompressible when submitted to uniaxial tension tests and their volume changes are strongly dependent of the amount of fillers but are unaffected by the crosslink density. The latter shows strong impact on the filled rubbers stretch to failure but more interestingly this impact is comparable to what is encountered in unfilled rubbers. The stretch to failure is improved by the addition of fillers with an optimum for material filled around 30 phr. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

N,N′-alkylated Imidazolium-Derivatives Act as Quorum-Sensing Inhibitors Targeting the Pectobacterium atrosepticum-Induced Symptoms on Potato Tubers

Bacteria belonging to the Pectobacterium genus are the causative agents of the blackleg and soft-rot diseases that affect potato plants and tubers worldwide. In Pectobacterium, the expression of the virulence genes is controlled by quorum-sensing (QS) and N-acylhomoserine lactones (AHLs). In this work, we screened a chemical library of QS-inhibitors (QSIs) and AHL-analogs to find novel QSIs targeting the virulence of Pectobacterium. Four N,N′-bisalkylated imidazolium salts were identified as QSIs; they were active at the μM range. In potato tuber assays, two of them were able to decrease the severity of the symptoms provoked by P. atrosepticum. This work extends the range of the QSIs acting on the Pectobacterium-induced soft-rot disease.     

Quantification of Yttria in Stabilized Zirconia by Raman Spectroscopy

The relationship between Y₂O₃ content in tetragonal and cubic ZrO₂ phases and the shift of the Raman band at ～645/cm was investigated. With increasing Y₂O₃ content, the 645/cm Raman band position decreases to lower Raman shift values. A fit of x = Y₂O₃ content in wt% and y = Raman band position in per cm, was found to be valid for low Y₂O₃‐stabilized t‐ZrO₂, t′′‐ZrO₂ transition, and fully stabilized c‐ZrO₂. Modeling the change in lattice parameters due to the incorporation of Y₂O₃ in ZrO₂ as obtained from Rietveld‐refined XRD data confirms that the peculiar sigmoidal form of the band shift with Y₂O₃ content is mainly due to a variation of the amount of oxygen vacancies. The resultant method is highly attractive in fields of Y₂O₃ determination in ZrO₂ materials where a fast, spatially resolved, and nondestructive analysis is required.     

Extending the Limits of Backtesting via the ‘Vanishing p’‐Approach

We derive backtests of value‐at‐risk and expected shortfall forecasts for levels that vanish as a function of the sample size n. In the standard case, the level of the forecasts is assumed to be fixed, leading to χ ²‐limiting distributions of the Portmanteau‐type backtests. We show that for levels vanishing at the order of n ^?1/2, Poisson‐type limits arise instead. These mimic key features of the test statistics, such as discreteness. Simulations demonstrate that for forecast levels and sample sizes of practical interest, using the Poisson‐type limits leads to much improved size vis‐à‐vis the standard χ ²‐limits.     

Potential influence of microorganisms on the corrosion of carbon steel in the French high- and intermediate-level long-lived radioactive waste disposal context

In the context of the high-level radioactive waste disposal CIGEO, the corrosion rate due to microbially influenced corrosion (MIC) has to be evaluated. In France, it is envisaged to dispose of high- and intermediate-level long-lived radioactive waste at a depth of 500 m in a deep geological disposal, drilled in the Callovo-Oxfordian claystone (Cox) formation. To do so, a carbon steel casing will be inserted inside disposal cells, which are horizontal tunnels drilled in the Cox. A specific cement grout will be injected between the carbon steel casing and the claystone. A study was conducted to evaluate the possibility of MIC on carbon steel in the foreseeable high radioactive waste disposal. The corrosiveness of various environments was investigated at 50°C and 80°C with or without microorganisms enriched from samples of Andra's underground research laboratory. The monitoring of corrosion during the experiments was ensured using gravimetric method and real-time corrosion monitoring using sensors based on the measurements of the electrical resistance. The corrosion data were completed with microbiological analyses including cultural and molecular characterizations.     

Validation and automatic test generation on UML models: the AGATHA approach

The related economic goals of test generation are quite important for software industry. Manufacturers ever seeking to increase their productivity need to avoid malfunctions at the time of system specification: the later the defaults are detected, the greater the cost is. Consequently, the development of techniques and tools able to efficiently support engineers who are in charge of elaborating the specification constitutes a major challenge whose fallout concerns not only sectors of critical applications but also all those where poor conception could be extremely harmful to the brand image of a product.This article describes the design and implementation of a set of tools allowing software developers to validate UML (the Unified Modeling Language) specifications. This toolset belongs to the AGATHA environment, which is an automated test generator, developed at CEA/LIST.The AGATHA toolset is designed to validate specifications of communicating concurrent units described using an EIOLTS formalism (Extended Input Output Labeled Transition System). The goal of the work described in this paper is to provide an interface between UML and an EIOLTS formalism giving the possibility to use AGATHA on UML specifications.In this paper we describe first the translation of UML models into the EIOLTS formalism, and the translation of the results of the behavior analysis, provided by AGATHA, back into UML. Then we present the AGATHA toolset; we particularly focus on how AGATHA overcomes several problems of combinatorial explosion. We expose the concept of symbolic calculus and detection of redundant paths, which are the main principles of AGATHA's kernel. This kernel properly computes all the symbolic behaviors of a system specified in EIOLTS and automatically generates tests by way of constraint solving. Eventually we apply our method to an example and explain the different results that are computed.     

Architectural lessons from environmental psychology: The case of biophilic architecture.

A review of findings from the field of environmental psychology shows that humans are aesthetically attracted to natural contents and to particular landscape configurations. These features are also found to have positive effects on human functioning and can reduce stress. However, opportunities for contact with these elements are reduced in modern urban life. It is argued how this evolution can have subtle but nontrivial adverse effects on psychological and physiological well-being. These can be countered by integrating key features of natural contents and structural landscape features in the built environment. Several practical proposals are discussed, ranging from literal imitations of natural objects (such as plants) to the use of nature's fractal geometry in an architectural context. (PsycINFO Database Record (c) 2010 APA, all rights reserved)