在3．39μm波段甲烷吸收特性的测量与应用研究

报道了甲烷气体在３．３９μｍ波段吸收特性的研究结果，及其在３．３９μｍ波段多波长干涉测量中的应用。通过改变甲烷吸收室的充气参数，使激光器工作在双等光强工作点，并完成了绝对距离的干涉测量。     

智能测温仪表的研究与实现

文章介绍了一种以8098单片机为核心、以铂铑一铂为测温元件研制的智能化测温仪表，它与传统的接触式温度传感器相比具有价格低、性能高、应用范围广、人机界面好等特点。     

具有厚大断面的大型球墨铸铁铸件的生产

首先通过电炉—LF精炼炉—VD精炼炉—包内球化的工艺路线获得了足够的优质铁液,然后通过选取合适的分型面、设置合理的浇注系统、设计专用的冷铁、安放足够大的保温冒口和上表面加大加工余量来去除夹渣等措施,成功生产了具有厚大断面的大型球墨铸铁铸件。     

光时域反射计衰减特性检定装置

介绍一套“有源法”光时域反射计（ＯＴＤＲ）衰减特性检定装置。对参考量值采取自标定的方法，用一种串联替代法实现对高重复性衰减器３．０１０ｄＢ值的准确标定。该装置检定灵活性强，对ＯＴＤＲ衰减特性检定的不确定度优于０．０２ｄＢ／ｄＢ（９５％置信度）。     

含钒铁水中硅,钛含量对炼钢,炼铁工序指标的影响

利用生产实践数据，分析了铁水中Ｓｉ＋Ｔｉ含理对炼铁焦比、产量、生铁Ｓ以及提钒时的钒回收率、钒渣品位、白灰消耗等工序指标的影响，提出了适合于承钢铁水的Ｓｉ＋Ｔｉ含量。     

Synthesis of Diamond Thin Films on TC4 by Using a Scanning Linear Flame

A scanning linear flame is used to deposit diamond films over a large area, and with high quality and good continuity by employing appropriate cooling means for the substrate. It is found that the structure and morphology of the deposited films mainly depend on the substrate temperature, the ratio of 0₂ to C₂H₂ flow rate and the relative position of the substrate with respect to the flame. These factors affecting the structure and morphology of diamond films are interrelated. Moreover, the influences of surface pretreatments on nucleation and growth of diamond films are also studied. The experimental results show that the nucleation density of diamond films is enhanced by scratching the surface of the substrate with diamond grit and initially coating a mechanical pump oil layer. For the substrate surface etched with metallographic etching acid, the nucleation and growth of diamond films are very uniform. In addition, the adhesion between the film and substrate is enhanced. Nucleation is favored on the prominent features of the substrate, i.e. scratch and crystal boundary.     

我国车用无铅汽油的质量状况及分析

对1998－2001年间生产领域和流通领域的近500批次汽油产品检验数据进行了总结和分析，表明我国汽油的实物质量正在不断提高，但从环保要求出发还需不断向国际水平靠扰，尤其应进一步降低烯烃含量，硫含量。     

Cloning and characterization of a symbiosis-related gene from an ectomycorrhizal fungus Laccaria bicolor

Point-to-point functional movements involve simultaneous shoulder and elbow joint rotations. In able-bodied subjects these movements are fully automatic, and feed-forward control ensures the synergistic activity of many muscles. Synergy between joint rotations was defined and described as a scaling between joint angular velocities [19]. Similarly, subjects who can control their shoulder movements may be assisted in reaching tasks by functional electrical stimulation (FES) of elbow extensor muscles. The synergistic control paradigm can be implemented in real-time by employing a hierarchically structured production-rules method. The use of production-rules necessitates the acquisition of knowledge and the assembly of a rule-base. A nonparametric technique was designed for the identification of the rules. The identification process was divided into two phases: determination of the scaling parameters, and determination of the stimulation parameters. The scaling parameters, needed for the coordination of movements, were determined in able-bodied subjects. Those depend exclusively on the initial and target positions of the hand. The number of scalings could be reduced by dividing the workspace into 12 zones. The stimulation parameters, needed for the execution of movements, were determined in subjects with paralyzed elbow extensor muscles by identifying triplets: elbow angular velocity, elbow angular acceleration (velocity increments), and the corresponding pulse durations for various classes of movements and loads attached to the hand.     

Stress concentration and fatigue of profiled reinforcing steels

Stress concentrations arise from profiles of ribbed reinforcing steel bars and in this study the results of calculated stress concentration factors (SCF), by using finite element method, are related to the fatigue test results. It is apparent that the degree of confinement of a ribbed bar embedded in concrete not only affects the magnitude of the ultimate bond stress but also the bond stress-slip relation. Thus the rib geometry or profile pattern is designed for optimum bond characteristics and not for fatigue considerations. However the rib geometry influences the fatigue performance through the SCFs arising from the root radius, width and flank angles of the profiles. It is shown that these latter factors have a significant influence on the fatigue behaviour of reinforcing steel bars.     

羧酸酯稀土对聚氯乙烯的热老化稳定作用研究

用热烘法研究了羧酸酯稀土对聚氯乙烯的热老化稳定作用。利用紫外／可见光谱分析跟踪共轭双键在热老化过程中的变化，比较ＣＥＲＥＳ，有机锡及两者的复合稳定剂的热老化稳定性能，发现ＣＥＲＥＳ与有机锡的稳定性能相当，复合稳定剂具有协同效应。