Thermostimulative shape memory effect of linear low‐density polyethylene/polypropylene (LLDPE/PP) blends compatibilized by crosslinked LLDPE/PP blend (LLDPE–PP)

A novel linear low‐density polyethylene (LLDPE)/polypropylene (PP) thermostimulative shape memory blends were prepared by melt blending with moderate crosslinked LLDPE/PP blend (LLDPE–PP) as compatibilizer. In this shape memory polymer (SMP) blends, dispersed PP acted as fixed phase whereas continuous LLDPE phase acted as reversible or switch phase. LLDPE–PP improved the compatibility of LLDPE/PP blends as shown in scanning electron microscopic photos. Dynamic mechanical analysis test showed that the melt strengths of the blends were enhanced with increasing LLDPE–PP content. A shape memory mechanism for this type of SMP system was then concluded. It was found that when the blend ratio of LLDPE/PP/LLDPE–PP was 87/13/6, the blend exhibited the best shape memory effect at stretch ratio of 80%, stretch rate of 25 mm/min, and recovery temperature of 135°C. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Structural and thermoelectric properties of hydrothermal-processed Ag-doped Fe2O3

Fe_2-xAg_xO₃ (0?≤?x?≤?0.04) nanopowders with various Ag contents were synthesized at different hydrothermal reaction temperatures (150?°C and 180?°C). Their structural properties were fully investigated through an X-ray diffraction, a Fourier transform infrared spectroscopy, and an X-ray photoelectron spectroscopy. The hydrothermal reaction temperature, time, and Ag content remarkably affected the morphological characteristics and crystal structure of the synthesized powders. The Fe_2-xAg_xO₃ (0?≤?x?≤?0.04) powders synthesized at 150?°C for 6?h and the Fe_2-xAg_xO₃ (0.02?≤?x?≤?0.04) powders synthesized at 180?°C for 12?h formed the orthorhombic α-FeOOH phase with a rod-like morphology, whereas the Fe_2-xAg_xO₃ (0?≤?x?≤?0.01) powders synthesized at 180?°C for 12?h formed the rhombohedral α-Fe₂O₃ phase with a spherical-like morphology. The Fe_1.98Ag_0.02O₃ fabricated by utilizing Fe_1.98Ag_0.02O₃ powders synthesized at 180?°C showed the largest power factor (0.64?×10^?5 Wm^?1 K^?2) and dimensionless figure-of-merit (0.0036) at 800?°C.     

Structural,viscoelastic, and vulcanization study of sponge ethylene–propylene–diene monomer composites with various carbon black loadings

In this article, we report the effect of various carbon nanoparticle concentrations on the structural, curing, tan δ, viscosity variation during vulcanization, thermal, and mechanical characteristics of ethylene–propylene–diene monomer polymer sponge composites. The purpose of this study was to develop high‐strength, foamy‐structure polymer composites with an optimum filler to matrix ratio for advanced engineering applications. We observed that the structural, vulcanization, viscoelastic, and mechanical properties of the fabricated composites were efficiently influenced with the progressive addition of carbon content in the rubber matrix. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39423.     

Thermal Evaluation of Diesel/Hydrogen Peroxide Fuel Blend

Thermal properties of fossil fuel are the key fundamental characteristics, which can distinguish any compound as a potential fuel. The performance of diesel fuel blend along with stability and solubility parameter designs are evaluated. The results from the experimental study indicate that the increase in hydrogen peroxide (H₂O₂) amount enhances the cetane number of diesel fuel blend significantly. However, the calorific value decreases as compared to pure diesel fuel. All values performed well according to the ASTM D‐975 diesel testing method. The thermodynamics of the prepared fuel blends also revealed that substantial solubility and diesel/H₂O₂ blend stability are provided even at lower temperatures. Such blends can be used as a feasible replacement of pure diesel fuel.     

Chemo-enzymatic synthesis of amino acid-based surfactants

The application of lipases to the synthesis of amino acid-based surfactants was investigated. Low yields (2–9%) were obtained in the acylation of free amino acids, such as l-serine and l-lysine, as well as their ethyl esters and amides with fatty acids, owing in part to low miscibility of the reactants. When the N-carbobenzyloxy (Cbz)-l-amino acids were used in an effort to improve miscibility of the amino acid derivatives with the acyl donor, a dramatic improvement was observed for N-Cbz-l-serine (92% yield) but not for N _α-Cbz- or N _ζ-Cbz-l-lysine (7 and 2% yield, respectively). As an alternative, and efficient synthesis of N _ζ-acyl-l-lysines was developed, based on the regiospecific chemical acylation of copper(II) lysinate. In pursuit of a general route to amino acid-fatty acid surfactants, the utility of a polyol linker was investigated. Thus, the glycerol ester of N _α′ N _ζ-di-Cbz-l-lysine was prepared and evaluated as a substrate for acylation. As expected, this and other glycer-1-yl esters of N-protected amino acids were excellent substrates for lipase-catalyzed acylation. Their reaction with myristic acid in the presence of Novozyme resulted in the regioselective acylation of the primary hydroxyl group of the glycerol moiety to afford the corresponding 1-O-(N-Cbz-l-aminoacyl)-3-O-myris-toylglycerols with conversions of 50–90%. These were readily deprotected to give a range of 1-O-(aminoacyl)-3-O-myristoyl-glycerols with overall yields of 27–71%.     

Doxorubicin-loaded cholic acid-polyethyleneimine micelles for targeted delivery of antitumor drugs: synthesis,characterization, and evaluation of their in vitro cytotoxicity

Doxorubicin-loaded micelles were prepared from a copolymer comprising cholic acid (CA) and polyethyleneimine (PEI) for the delivery of antitumor drugs. The CA-PEI copolymer was synthesized via pairing mediated by N,N’-dicyclohexylcarbodiimide and N-hydroxysuccinimide using dichloromethane as a solvent. Fourier transform infrared and nuclear magnetic resonance analyses were performed to verify the formation of an amide linkage between CA and PEI and doxorubicin localization into the copolymer. Dynamic light scattering and transmission electron microscopy studies revealed that the copolymer could self-assemble into micelles with a spherical morphology and an average diameter of <200 nm. The CA-PEI copolymer was also characterized by X-ray diffraction and differential scanning calorimetry. Doxorubicin-loaded micelles were prepared by dialysis method. A drug release study showed reduced drug release with escalating drug content. In a cytotoxicity assay using human colorectal adenocarcinoma (DLD-1) cells, the doxorubicin-loaded CA-PEI micelles exhibited better antitumor activity than that shown by doxorubicin. This is the first study on CA-PEI micelles as doxorubicin carriers, and this study demonstrated that they are promising candidates as carriers for sustained targeted antitumor drug delivery system.     

Rapid synthesis of thermally stable hydroxyapaptite

We have optimized the wet precipitation synthesis of hydroxyapaptite to obtain thermally stable powder in the short time span of 3 min. Exposure of the reaction mixture to 1000 W microwave for 3 min furnished hydroxyapatite, which was thermally stable at temperatures up to 1200 °C. Powders were analyzed for phase purity using X-ray crystallography; chemical composition was studied using Fourier transform infrared spectroscopy while particle morphology was analyzed using scanning electron microscopy.     

The effectuation of seawater on the microstructural features and the compressive strength of fly ash blended cement at early and later ages

The current work scrutinizes the effectuation of seawater on morphological properties, pore structure, and compressive strength during the hydration process of fly ash blended cement at 3, 7, 28, 56, and 90 days to better understand the influence of salinity conditions of seawater on the microstructural modification and strength development of the hydration products as well as the total porosity. The chemical reaction's mechanism of mightily soluble salts, for example, Mg₂SO₄ and NaCl, with hydrated fly ash and blended cement (calcium-bearing phases) was also confirmed. Fourier-transform infrared spectroscopy has been appointed to observe and characterize the energetics of variation in the formulation of portlandite (CH), calcium silicate hydrate, gypsum (Gy), ettringite (AFt), and calcium chloroaluminate (Friedel's salt [FS]) throughout the hydration process of fly ash blended cement with seawater in comparison with deionized water. X-ray diffraction analysis exposed that the peak intensities of FS, portlandite, and some particular phases of the hydrated fly ash blended cement in seawater are higher and sharper than the comparable peaks in deionized water. Mercury intrusion porosimetry-measurements have been appointed that the total porosity of artificial seawater (ASW) was decreased from 28.9% at 3 days to 19.4% at 56 days. In addition, the average, median, and critical pore diameter were decreased in ASW while compared to deionized water (DIW). The reaction products of this work were also characterized using scanning electron microscopy, EDS, compressive strength, and isothermal calorimeter.     

A new equation for estimating [η] from single-viscosity measurement in dilute solution

The use of a linear two-parameter approximation for determining limiting viscosity number, [η], of a polymer in the state of infinite dilution requires considerable amount of time, effort, and materials. Several workers who attempted to estimate [η] directly from single-viscosity measurement also proposed equations for this purpose. Such equations are tested and found to have good applicability to practical data within specified limits of concentration or specific viscosity. A new equation has been derived and tested for polymers of high and low molecular weights in various solvents and at different temperatures. The introduction of a constant in this equation makes it applicable over a wider range of specific viscosity. It is found to serve better for determination of [η] from a single-viscosity measurement.     

Identification of Bioactivity,Volatile and Fatty Acid Profile in Supercritical Fluid Extracts of Mexican arnica

Supercritical fluid extraction (SFE) is a sustainable technique used for the extraction of lipophilic metabolites such as pigments and fatty acids. Arnica plant is considered a potential candidate material with high antioxidant and antimicrobial activities. Therefore, in this study, a locally available Heterotheca inuloides, also known as Mexican arnica, was analyzed for the extraction of high-value compounds. Based on different pressure (P), temperature (T), and co-solvent (CoS), four treatments (T) were prepared. A maximum 7.13% yield was recovered from T2 (T = 60 °C, P = 10 MPa, CoS = 8 g/min), followed by 6.69% from T4 (T = 60 °C, P = 30 MPa, CoS = 4 g/min). Some bioactive sesquiterpenoids such as 7-hydroxycadalene, caryophyllene and δ-cadinene were identified in the extracts by GC/MS. The fatty acid profile revealed that the main components were palmitic acid (C16:0), followed by linoleic acid (C18:2ω6c), α-linolenic acid (C18:3ω3) and stearic acid (C18:0) differing in percent yield per treatment. Antibacterial activities were determined by the agar diffusion method, indicating that all the treatments exerted strong antibacterial activity against S. aureus, C. albicans, and E. coli strains. The antioxidant capacity of the extracts was also measured by three in vitro assays, DPPH, TEAC and FRAP, using Trolox as a standard. Results showed high antioxidant capacity enabling pharmaceutical applications of Mexican arnica.