Improvement in light harvesting and performance of P3HT:PCBM solar cell by using 9,10-diphenylanthracene

We have studied the effect of 9,10-diphenylanthracene (DPA) as a conjugated dye with different concentrations on light harvesting and performance of solar cell composed from poly (3-hexylthiophene) (P3HT):[6,6]-phenyl-C₆₁butyric acid methyl ester (PCBM) blend films. The dye concentration effect was investigated with optical absorption spectroscopy, photocurrent spectroscopy, and current density-voltage characteristic measurements on devices under AM1.5 white light illumination with intensity of 100 mW/cm². The incorporation of the conjugated DPA inside P3HT:PCBM blend improved the light harvesting, slightly, and conjugation length indicated from the optical absorption and external quantum efficiency spectra. By adding specific amounts of the DPA into P3HT:PCBM blend, the external quantum efficiency and solar cell performance parameters, i.e., short circuit current density, fill factor, and power conversion efficiency improved as a result of improvement in the light harvesting and charge carrier transfer taking place between P3HT and PCBM through the conjugated DPA molecules.     

Role for Fe(III) minerals in nitrate-dependent microbial U(IV) oxidation

Microbiological reduction of soluble U(VI) to insoluble U(IV) is a means of preventing the migration of that element in groundwater, but the presence of nitrate in U(IV)-containing sediments leads to U(IV) oxidation and remobilizaton. Nitrite or iron(III) oxyhydroxides may oxidize U(IV) under nitrate-reducing conditions, and we determined the rate and extent of U(IV) oxidation by these compounds. Fe(III) oxidized U(IV) at a greater rate than nitrite (130 and 10 microM U(IV)/day, respectively). In aquifer sediments, Fe(III) may be produced during microbial nitrate reduction by oxidation of Fe(II) with nitrite, or by enzymatic Fe(II) oxidation coupled to nitrate reduction. To determine which of these mechanisms was dominant, we isolated a nitrate-dependent acetate- and Fe(ll)-oxidizing bacterium from a U(VI)- and nitrate-contaminated aquifer. This organism oxidized U(IV) at a greater rate and to a greater extent under acetate-oxidizing (where nitrite accumulated to 50 mM)than under Fe(II)-oxidizing conditions. We showthatthe observed differences in rate and extent of U(IV) oxidation are due to mineralogical differences between Fe(III) produced by reaction of Fe(II) with nitrite (amorphous) and Fe(III) produced enzymatically (goethite or lepidocrocite). Our results suggest the mineralogy and surface area of Fe(III) minerals produced under nitrate-reducing conditions affect the rate and extent of U(IV) oxidation. These results may be useful for predicting the stability of U(IV) in aquifers.     

A Treatment of Wastewater Containing Safranin O Using Immobilized Myriophyllum spicatum L. onto Polyacrylonitrile/Polyvinylpyrrodlidone Biosorbent

Journal of Inorganic and Organometallic Polymers and Materials - The phase inversion technique was used to successfully immobilize a submerged aquatic plant called Myriophyllum spicatum L. onto...     

Hard Gelatin and Hypromellose (HPMC) Capsules: Estimation of Rupture Time by Real-time Dissolution Spectroscopy

ABSTRACT

The objective of this study was to measure rupture time of gelatin and hypromellose (hydroxypropyl methylcellulose or HPMC) capsules using a novel approach based on real-time dissolution spectroscopy. Rupture time was measured in standard dissolution apparatus at a constant temperature using a dip-type fiber-optic probe. Labrasol released from the capsules was treated as the marker of the rupture process. Light scatter generated by the emulsified labrasol was detected by an ultrafast monochromator at scan rates approximating 24,000 nm/min. This technique was validated by measuring the dissolution time of gelatin capsules. Rupture times of hypromellose capsules were studied as a function of capsule size, capsule grade, and dissolution medium. Statistical correlations were analyzed by ANOVA. Rupture time of hypromellose capsules was dependent on both the medium and the grade of the capsule, and was independent of capsule size. The composition of the dissolution medium contributes to the rupture time of the capsules and should be considered when fast release and quick biological response is desired. Release delay, however, may not manifest itself in vivo and the time to maximum plasma concentration may not be significant.     

Effect of Armature Design on Thermal and Electromagnetic Distribution of an Electromagnetic Launcher

The purpose of this study is to investigate the effect of armature design on the thermal and magnetic induction distribution of the rails and the armature in an electromagnetic launcher. In our formulation of governing, non-linear differential equations, Maxwell equations coupled with energy equation are applied to the rails and the armatures. To solve the non-linear governing differential equations, a finite difference code based on alternative directional implicit method is utilized. For different armatures, the length, shape, and input current of the rails stay the same. In addition, armature-melting latent heat and the friction force between the armatures and the rails are considered. First, armature speed is calculated; then, temperature and magnetic induction distribution is calculated by the energy equation. Temperature and magnetic induction distribution obtained for the rails and different armatures show that the maximum temperature occurs at the trailing edge of each armature. The best design shows the lowest temperature, which is about 600 K. This is due to aerodynamic shape and stability of this armature. However, for all armatures, the temperature of one meter rail stays around 360 K.     

Effects of electron beam irradiation on the structure–property behavior of blends based on low density polyethylene and styrene-ethylene-butylene-styrene-block copolymers

Low density polyethylene (LDPE) blends with different additives were exposed to various doses of electron beam irradiation. The additives used were styrene-ethylene-butylene-styrene-block copolymers (SEBS), styrene-ethylene-butylene-styrene-block copolymer grafted with maleic anhydride (SEBS-g-MA) and mineral compounds. The structure–property behavior of electron beam irradiated blends was characterized in terms of mechanical, thermal, and electrical resistivity properties. The results indicated that the unirradiated LDPE blends with the different compositions showed improved mechanical properties, thermal and volume resistivity properties than pure LDPE. However, the improvement in properties of unirradiated blends by using SEBS-g-MA was higher than using SEBS copolymer. Further improvement in the mechanical, thermal and electrical properties of the LDPE blends was achieved after electron beam irradiation. The limited oxygen index (LOI) data revealed that the LDPE/SEBS-g-MA/ATH blend was changed from combustible to self-extinguishing material after electron beam irradiation to a dose of 100 kGy. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

The synthesis of multilayer graphene materials by the fluorination of carbon nanodiscs/nanocones

Multilayer carbonaceous nanomaterial has been synthesized using a two-step process: carbon nanodiscs/nanocones were fluorinated using either the direct reaction with pure F₂ gas or the thermal decomposition of solid fluorinating agent (TbF₄). Then the fluorinated parts were removed by treatment at 600 °C in air. When the fluorine atoms are homogenously dispersed, using fluorination by TbF₄, thinning due to thermal defluorination results in multilayer materials with 7–10 nm of thickness and 400–500 nm of width. Such resulting materials and the fluorinated precursors have been characterized by solid state NMR, TGA, XRD, SEM, TEM, AFM and Raman spectroscopy.     

Correlation between the dimensionality and the constants of elasticity of rare-earth doped borate glasses

This work was devoted to explore the correlation between the dimensionality and the computed theoretically constants of elasticity of borate based glasses doped with rare-earth oxides. The dimensionality of the glassy network has been calculated in terms of the d ratio which is equal to 4 C ₄₄/K _e and discussed in terms of the cross-link density and number of network bonds per unit volume of these glasses. Constants of elasticity were calculated in terms of the bond compression model and the Makishima-Mackenzie model. The average cross-link density, the number of network bonds per unit volume, the average stretching-force constant, and the ratio of the estimated bulk modulus (K _bc) to the experimentally determined (K _e) have been calculated and discussed in terms of the bond-compression model. Young??s modulus, the packing density, and the dissociation energy have been calculated and analyzed in terms of the Makishima-Mackenzie model. The results showed that the computed elastic moduli and the dimensionality of the borate glasses containing La₂O₃ or Gd₂O₃ are strongly dependent on the concentration of the structural units of the constituent oxides and types of bonds between these units.