Injection molding of 316L stainless steel microstructures

Micro powder injection molding (PIM) is a promising process for low cost fabrication of three-dimensional microstructures. The PIM can be used for a wide range of metal and ceramic materials, combined with the potential for mass production. In this paper, initial study on the molding of 316L stainless steel microstructures was investigated. Three different micro-cavity shapes were used. Small powder with mean size of 4 m was used with two multi-component binder systems. Microstructures with dimension as small as 35 m could be injection molded. For successful molding, the binder system must provide high green strength to withstand ejection from the mold and suitable molding parameters used. For example, a high mold temperature is required and ejection speed must be reduced. The cross-sections of the microstructures are precisely replicated. The general shape in the depth direction is replicated although it is not as good as that for the cross-section. More work has to be conducted to realize the full potentials of the process.The authors would like to thank the Nanyang Technological University for awarding a research grant to conduct this research and Adeka Fine Chemicals (Tokyo) for the supply of PAN 250 binder.     

Volatilization and recovery of mercury from mercury wastewater produced in the course of laboratory work using Acidithiobacillus ferrooxidans SUG 2-2 cells

The iron-oxidizing bacterium Acidithiobacillus ferrooxidans SUG 2-2 is markedly resistant to mercuric chloride and can volatilize mercury (Hg0) from mercuric ion (Hg2+) under acidic conditions. To develop a microbial technique to volatilize and recover mercury from acidic and organic compound-containing mercury wastewater, which is usually produced in the course of everyday laboratory work in Okayama University, the effects of organic and inorganic chemicals on the mercury volatilization activity of A. ferrooxidans cells were studied. Among 55 chemicals tested, the mercury volatilization from a reaction mixture (pH 2.5) containing resting cells of SUG 2-2 (1 mg of protein) and mercury chloride (14 nmol) was strongly inhibited by AgNO3 (0.05 mM), K2CrO7 (1.0 mM), cysteine (1.0 mM), trichloroethylene (1 microM), and commercially produced detergents (0.05%). However, the strong inhibition by trichloroethylene and detergents was not observed when these organic compounds were chemically decomposed using Fenton's method before the treatment of the wastewater with SUG 2-2 cells. When 20 ml of water acidified with sulfuric acid (pH 2.5) containing ferrous sulfate (3%), diluted mercury wastewater (17.5 nmol of Hg2+) and SUG 2-2 cells (0.05 mg of protein) were incubated for 10 d at 30 degrees C, 47% of the total mercury in the wastewater was volatilized and recovered into a trapping reagent for metal mercury. However, when the organic compounds in the mercury wastewater were decomposed using Fenton's method and then treated with A. ferrooxidans cells, approximately 100% of the total mercury in the wastewater was volatilized and recovered.     

Novel gene assay by probe-regulated simultaneous separation using capillary electrophoresis (CE-PRESS)

A novel methodology, a probe-regulated simultaneous separation using capillary electrophoresis (CE-PRESS), was developed for simultaneous assay of multiple genes. The single-stranded (ss) DNA-polymer conjugate-probes were placed in a capillary, and then a mixture of target ssDNAs was injected. These ssDNAs were hybridized with corresponding complementary ssDNA-polymer conjugate-probes after charging the capillary. Two resulting double-stranded (ds) complexes of ssDNAs and ssDNA-polymer conjugate-probes were detected at different migration times. We found that the electrophoretic mobilities of two ssDNA-poly(acrylamide) conjugate-probes [-(5'-GCCACCAGC-3')m-AAm(n)- and -(5'-ACCTTCACT-3')p-AAm(q)-; AAm, acrylamide] obtained by copolymerizing 5'-methacryloyl-modified ssDNA and AAm were different, depending on their molar fraction of ssDNA, although the ssDNAs chain lengths were the same. Two ssDNAs (5'-GCTGGTGGC-3' and 5'-AGTGAAGGT-3') having the same chain length were successfully separated with our novel system, although the separation of these ssDNAs is impossible in conventional capillary electrophoresis systems.     

Effect of Impurities on the Electronic Structure of Vortex Core Investigated by Microwave Surface Impedance Measurement

We investigated the microwave surface impedance in Zn doped YBa₂Cu₃O _y . For low Zn concentrations, crossover frequency _p and viscosity of vortex do not change significantly (at maximum, factor of 2). This is in sharp contrast to the dramatic change in the zero-field quasiparticle scattering time. The robust nature of viscosity on the impurity doping suggests that the quasiparticle scattering time in the vortex core is determined by a different mechanism from that outside the core.     

Second-Order Approximation for DOA Estimation of Near-Field Sources

The direction-of-arrival estimation of near-field sources can be formulated as a multidimensional nonlinear optimization problem, where a performance index is minimized with respect to azimuth, range, and source power. For the single source case, under the assumption that the range is relatively larger than the interelement distance, we use the second-order approximation to derive a simpler performance index parameterized by azimuth only. The minimization of the new index is easier than that of the original one parameterized by azimuth, range, and source power. Moreover, the proposed method considers the degradation of signal powers, giving more accurate estimation results. Also for the multiple source case, an efficient computation method is developed by using the second-order approximation.     

Defective bone remodelling in osteoprotegerin-deficient mice

Previous studies have reported enhanced osteoclastogenesis, increased bone resorption and osteoporosis in osteoprotegerin (OPG)-deficient mice. In the present study, we show that the tibial epiphyses contain abundant, thin trabeculae lined with numerous osteoclasts and cuboidal osteoblasts. The increase in osteoblasts and osteoclasts was associated with a dramatic increase in calcein labelling of the mineralization fronts and replacement of much of the intertrabecular marrow with numerous alkaline phosphatase-positive preosteoblasts. Furthermore, the discrete, linear cement lines seen in wild-type mice were replaced by a randomly oriented meshwork of cement lines that were stained intensely for tartrate-resistant acid phosphatase and osteopontin in the OPG-/- mice. These indices of accelerated bone remodelling in mutant bone were associated with irregular trabecular surfaces, a disorganized collagen matrix interspersed with amorphous ground substance and numerous fissures between old and new bone. In total, these observations indicate that enhanced osteoclastic activity in OPG-/- epiphyses led to a coupled increase in osteoblast differentiation and activity and an increase in bone remodelling. The high bone turnover, disorganized matrix and impaired attachment of new to old bone in the cement lines in OPG-/- mice appear to cause bone fragility.     

Sonochemical degradation of chlorinated hydrocarbons using a batch and continuous flow system

The sonochemical degradation of chlorinated hydrocarbons such as 1,1,1-trichloroethane, trichloroethylene and tetrachloroethylene in aqueous solution was carried out in the batch and continuous flow systems at an ultrasonic frequency of 100kHz under an air atmosphere. In the batch experiment, the rate of degradation follows the order 1,1,1-trichloroethane>tetrachloroethylene>trichloroethylene, and the chlorinated hydrocarbon were readily degraded by ultrasonic irradiation. The experiments in the continuous flow system were performed in the range of volumetric flow rate from 7 to 30 x 10(-3)lmin(-1). The conversion of the chlorinated hydrocarbons at a steady-state of reactor depended on the volumetric flow rate. The yield of Cl(-) (as a measurement of mineralization of chlorinated hydrocarbons) was 70-90% of the chlorine atoms in the parent chlorinated hydrocarbon molecules. From the viewpoint of the scale-up process, the sonochemical degradation of trichloroethylene was simulated in a three stage reactor, and the conversion (>99%) in a third stage reactor was showed the good results that can be satisfied a desired water quality standard.     

Formation and emission of volatile polonium compound by microbial activity and polonium methylation with methylcobalamin

We observed biologically mediated emission of Po from culture solution inoculated sea sediment extract and incubated under natural light/dark cycle condition or dark condition the emitted Po compound would be lipophilic because of effective collection in organic solvent. Sterilization of the culture medium with antibiotics or CuSO4 completely suppressed growth of microorganisms and resulted in no emission of Po, indicating biological activity of microorganisms is responsible for formation and emission of volatile Po compound. Po emission also occurred when seawater was used as a culture medium. Our finding indicates a possibility of biotic source for atmospheric Po in the environment, which has been believed to be originated from abiotic sources. We compared emission behavior of Po and S in the culture experiments, the elements belong to XVI group in the Periodical Table, and consider that their emission mechanisms involved would be different though the emission of both elements is supported by biological activity of microorganisms. One of the chemical forms of S emitted was confirmed to be dimethyl sulfide (DMS) but that of Po is not known. Methylation experiments of Po with methylcobalamin demonstrated a formation and emission of volatile Po compound. The methylation of Po with methylcobalamin might be related to the observed Po emission in the culture experiments.