Effect of microstructures on dielectric breakdown strength of sintered reaction-bonded silicon nitride ceramics

Silicon nitride (Si₃N₄) was prepared from silicon by a sintered reaction-bonded silicon nitride method using yttria and magnesia as sintering additives. Post-sintering (PS) of nitrided compacts was carried out at 1850°C under a nitrogen pressure of 1 MPa. Effect of PS time on microstructure and dielectric breakdown strength (DBS) of the prepared Si₃N₄ ceramics was evaluated. The DBS was measured using specimens with four different thicknesses (0.30, 0.20, 0.10, and 0.05 mm) in order to examine the thickness dependence. The porosity of the sintered Si₃N₄ decreased by prolonging the PS time, and the full density could be achieved at the PS time of over 6 h. After full densification, rod-like β-Si₃N₄ grains grew up, and their maximum grain size increased from 45.1 to 154.7 μm by prolonging the PS time from 6 to 48 h. The DBS of the thick Si₃N₄ substrates (0.30 mm) showed little variation from 35.4 to 47.0 kV/mm, regardless of the PS time. On the other hand, that of the thin ones (0.05 mm) dramatically decreased from 99.5 to 9.8 kV/mm with increased the PS time from 6 to 48 h. Because the DBS sharply decreased at the thin substrate sintered for longer time in which some large-elongated grains might span the substrate thickness-wise throughout, it was inferred that the interface between β-Si₃N₄ grains and grain boundary phase/intergranular glassy films might be a path of the dielectric breakdown.     

Synthesis and optical properties of the [2.2]paracyclophane-containing π-conjugated polymer with a diacetylene unit

Summary Novel through-spaceπ-conjugated polymer based on poly(p-henyleneethynylene)/poly(p-phenylenebutadiynylene) hybrids containing a [2.2]paracyclophane unit in the main chain was synthesized by copper-catalyzed alkyne coupling reaction. The structure of the polymer was supported by ¹H NMR and IR spectra. The obtained polymer was soluble in common organic solvents such as THF, CH₂C1₂, CHC1₃ and toluene. The number-average of molecular weight of the polymer was estimated to be 63000 by GPC. The polymer emitted a bluish green light in solution and in the solid state. Received:24 September 2002/Revised version: 19 November 2002/Accepted: 19 November 2002 Correspondence to Yoshiki Chujo     

Fluoroscent properties of 22,24-diprotonated 5,10,15,20-tetrakis (4-sulfonatophenyl)porphyrin interacting with a β-sheet structure of a zwitterionic polypeptide

Summary The fluorescent properties of 22,24-Diprotonated 5,10,15,20-Tetrakis(4-sulfonatophenyl)porphyrin interacting with the β-sheet structure of a zwitterionic Poly(Glu-Val-Lys-Val) were investigated under various conditions. The TPPS diacid species formed four types of aggregated species by the addition of the polypeptide and/or NaCl. The fluorescent bands were observed for the monomeric and their three aggregated species. The fluorescent intensity changes and maximum wavelength shifts indicated that the monomeric and their aggregated species bound to the polypeptide by electrostatic interaction. The poly(Glu-Val-Lys-Val)/TPPS diacid species system may be provided a good model for studying the porphyrin assembly binding to specific protein domains with definite orientations and alignments. Received: 16 November 2001/Revised version: 14 December 2001/Accepted: 21 December 2001     

Synthesis and properties of conjugated copolymers having a tricarbonyl(arene)chromium and thiophene units in the main chain

Summary Palladium-catalyzed polymerization of η ⁶-(1,4-diethynylbenzene)tricarbonyl chromium (1) with 3-alkyl-2,5-dibromothiophene (2a-c) was carried out to give the corresponding alternating conjugated copolymers (5a-c) in good yields. The structures of the polymers were supported by ¹H NMR and IR spectra. The polymers obtained were soluble in common solvents such as THF, CH₂Cl₂, CHCl₃ and toluene. The molecular weights of the polymers were determined by GPC. Their thermal, optical and electrical properties were investigated in detail. Received: 18 March 2002 /Accepted: 1 April 2002     

N-Alkylation of chitin and some characteristics of the novel derivatives

Summary Introduction of simple alkyl groups at the C-2 nitrogen of chitin and some properties of the resulting N-alkyl-chitins have been examined. Chitosan was fully deacetylated and treated with three kinds of aldehydes, formaldehyde, acetaldehyde, and pentanal. The Schiff bases of chitosan, whose extents of substitution were dependent on the amount of aldehydes, were reduced with sodium cyanoborohydride to N-alkylated chitosans. The N-alkyl-chitosans were then transformed into the corresponding N-alkyl-chitins by acetylation with acetic anhydride followed by transesterification to remove partly formed O-acetyl groups. The resulting N-methyl-, ethyl-, and pentyl-chitins were amorphous and showed improved affinity for organic solvents. Received: 13 December 2001/Revised version: 11 January 2002/Accepted: 17 January 2002     

Synthesis and Properties of Novel Poly(p-phenylenevinylene)s Containing a Tricarbonyl(arene)chromium Unit in the Main Chain

Summary Novel π-conjugated polymers based on poly(p-phenylenevinylene)s (PPVs) containing a tricarbonyl(arene)chromium unit in the main chain were synthesized by Horner-Wadsworth-Emmons olefination. The structures of the polymers were supported by ^lH NMR and IR spectra. The polymers obtained were soluble in common solvents such as THF, CH₂Cl₂, CHCl₃ and toluene. The molecular weights of the polymers were determined by GPC. Their thermal, optical, and electrochemical properties were investigated in detail. Received: 18 November 2002/Revised version: 10 February 2003/ Accepted: 11 February 2003 Correspondence to Yoshiki Chujo     

Kinetically Stable Bicelles with Dilution Tolerance,Size Tunability,and Thermoresponsiveness for Drug Delivery Applications

Mixtures of a phospholipid (1,2‐dipalmitoyl‐sn‐glycero‐3‐phosphatidylcholine, DPPC) and a sodium‐cholate‐derived surfactant (SC‐C₅) at room temperature formed phospholipid bilayer fragments that were edge‐stabilized by SC‐C₅: so‐called “bicelles”. Because the bilayer melting point of DPPC (41 °C) is above room temperature and because SC‐C₅ has an exceptionally low critical micelle concentration (<0.5 mm ), the bicelles are kinetically frozen at room temperature. Consequently, they exist even when the mixture is diluted to a concentration of 0.04 wt %. In addition, the lateral size of the bicelles can be fine‐tuned by altering the molar ratio of DPPC to SC‐C₅. On heating to ≈37 °C, the bicelles transformed into micelles composed of DPPC and SC‐C₅. By taking advantage of the dilution tolerance, size tunability, and thermoresponsiveness, we demonstrated in vitro drug delivery based on use of the bicelles as carriers, which suggests their potential utility in transdermal drug delivery.     

Enantioselective addition Of diketene to aldehydes promoted by chiral schiff base—titanium alkoxide complex. Application to asymmetric synthesis of potential inhibitors of HMG coenzyme reductase

Highly enantioselective addition of diketene to aldehydes was achieved by using novel Schiff base—titanium alkoxide complexes. Up to 92% ee of 5-hydroxy-3-oxoesters was obtained. This procedure provides an efficient method for the asymmetric synthesis of potential inhibitors of HMG coenzyme reductase.     

EFFECTS OF OPERATIONAL CONDITIONS ON DRYING CHARACTERISTICS IN CLOSED SUPERHEATED STEAM DRYING

The effects of operational conditions on the drying performance in closed superheated steam drying were examined theoretically and experimentally. The vapor generated from the sample was circulated in the drying chamber. In the theoretical analysis, the replacement of air with vapor in drying chamber and the convective vapor transfer in sample were considered. At the start of drying, the drying chamber was filled with air. As the drying proceeded, the air was replaced with the vapor generated from sample. The calculated results explained the characteristics of experimental data. The pore diameter of sample had little effect on the drying characteristics. During the internal evaporation period, the evaporation occurred in the narrow zone, which moved from the surface to the bottom of sample. The convective vapor transfer in sample had a significant influence on the drying performance. The excess increments in temperature and velocity of drying gas hardly contributed to shortening the drying time.     

Mechanisms of orientational and photoelastic birefringence generation of methacrylates for the design of zero–zero‐birefringence polymers

The intrinsic birefringence Δn⁰ and photoelastic coefficient C of poly(methyl methacrylate), poly(2,2,2‐trifluroethyl methacrylate), poly(phenyl methacrylate), and poly(2,2,3,3,3‐pentafluorophenyl methacrylate) were determined. We categorized these methacrylate polymers into four birefringence‐types, even though their molecular structures differed only by the substituents on the side chains. Based on the results of Δn⁰ and C, novel polymers that exhibit neither orientational nor photoelastic birefringence, i.e., zero–zero‐birefringence polymers, were designed and synthesized by quaternary copolymerization system. Furthermore, we confirmed that the mechanisms of orientational birefringence and photoelastic birefringence generation were different in these methacrylate polymers. The conformation of the repeat unit of the polymers was nearly constant during the generation of orientational birefringence. In contrast, the conformation of the repeat unit of the polymers changed during the generation of photoelastic birefringence in the glassy state. These findings demonstrated the reasonability of evaluating orientational and photoelastic birefringence separately, as well as the adequacy of the classification of polymers into four birefringence‐types. Given these results and the fact that zero–zero‐birefringence polymers could be prepared successfully by four‐birefringence type monomers, we demonstrated the reasonability of the method for designing the zero–zero‐birefringence polymers. POLYM. ENG. SCI., 55:1330–1338, 2015. © 2015 Society of Plastics Engineers