Complete erasing of ghost images on computed radiography plates and role of deeply trapped electrons

Computed radiography (CR) plates made of europium-doped Ba(Sr)FBr(I) were simultaneously exposed to filtered ultraviolet light and visible light in order to erase ghost images, i.e., latent image that is unerasable with visible light (LIunVL) and reappearing one, which are particularly observed in plates irradiated with a high dose and/or cumulatively over-irradiated. CR samples showing LIunVLs were prepared by irradiating three different types of CR plates (Agfa ADC MD10, Kodak Directview Mammo EHRM2, and Fuji ST-VI) with 50 kV X-ray beams in the dose range 8.1 mGy—8.0 Gy. After the sixth round of simultaneous 6 h exposures to filtered ultraviolet light and visible light, all the LIunVLs in the three types of CR plates were erased to the same level as in an unirradiated plate and no latent images reappeared after storage at 0 °C for 14 days. With conventional exposure to visible light, LIunVLs consistently remained in all types of CR plates irradiated with higher doses of X-rays and latent images reappeared in the Agfa M10 plates after storage at 0 °C. Electrons trapped in deep centers cause LIunVLs and they can be erased by simultaneous exposures to filtered ultraviolet light and visible light. To study electrons in deep centers, the absorption spectra were examined in all types of irradiated CR plates by using polychromatic ultraviolet light from a deep-ultraviolet lamp. It was found that deep centers showed a dominant peak in the absorption spectra at around 324 nm for the Agfa M10 and Kodak EHRM2 plates, and at around 320 nm for the Fuji ST-VI plate, in each case followed by a few small peaks. The peak heights were dose-dependent for all types of CR samples, suggesting that the number of electrons trapped in deep centers increases with the irradiation dose.     

Measurement of Flow Stress in Supercooled Austenite for High Hardenability Steel

In this article, the isothermal flow stress in supercooled austenite was measured for a high hardenability steel. Supercooled austenite forms at the nonequilibrium phase and changes into other phases within a short time. It was confirmed that conventional tensile tests, which require maintaining a constant temperature before stretching, cannot accurately measure the flow stress in supercooled austenite. Therefore, a new tensile test named “the continuous cooling tensile test” was developed. In this test, stretching is conducted during continuous cooling. In the continuous cooling tensile test, the flow stress between 673 K and 973 K (400 °C and 700 °C) was measured. Microscopic observations of the continuous cooling test results verified that the microstructures were supercooled austenite.     

Decomposition Characteristics of an Artificial Biogas in a Low‐Pressure DC Glow Discharge

The decomposition characteristics of an artificial biogas, which is a mixture of CH ₄, CO ₂, and H ₂ S, using a low‐pressure DC glow discharge have been investigated. It is found that H ₂, CO, C ₂ H ₂, H ₂ O, CS ₂, and COS are produced from the artificial biogas in the glow discharge. About 65% of the hydrogen atoms in CH ₄ are converted into H ₂ at an input energy of 800 J, at which CH ₄ is completely decomposed, and the decomposition characteristics of the artificial biogas are minimally dependent on the H ₂ S additive. Further, H ₂ S has a tendency to be decomposed earlier than the other components of the artificial biogas. When the glow discharge is generated in the artificial biogas with H ₂ S, some of the carbon atoms are found to deposit on the electrodes and the wall of the discharge chamber. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(1): 26–33, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22304     

Recovery of serum proteins using cellulosic affinity membrane modified by immobilization of CU2+ ion

An affinity membrane was prepared from a porous cellulose membrane, and adsorption and recovery of serum proteins were investigated from the viewpoint that affinity membranes are efficacious against separation and purification of biomaterials. Into the cellulose membrane, iminodiacetate (IDA) group that acts as a ligand to metal ions was introduced (Cell–IDA membrane), and then Cu²⁺ ion was immobilized (Cell–IDA–Cu membrane). Bovine serum albumin (BSA) and γ-globulin (BγG), which are the major proteins in blood, were adopted as model proteins to be separated. The Cell–IDA–Cu membrane had large adsorption capacity for these proteins despite the low degree of modification. The amounts of proteins adsorbed on the Cell–IDA–Cu membrane increased with increasing pH, and BγG was adsorbed more than BSA. High protein recoveries from the Cell–IDA–Cu membrane were obtained. The separation of these proteins was also conducted under the optimum conditions of adsorption and recovery, and BγG was concentrated more than BSA although the initial concentration of BγG was lower than that of BSA. © 1996 John Wiley & Sons, Inc.     

Effects of processing and cooking on the levels of pesticide residues in soybean samples

The effects of processing and cooking on the levels of pesticide residues in soybean samples were investigated for 14 pesticides in pre-harvest samples. On soaking, the transfer ratios (%, total pesticide residue amount in product/that in soybean) of soaked soybean were greater than 60% for most of the pesticides investigated. The transfer ratio of soymilk ranged from 37% to 92%, and that of tofu ranged from 7% to 63%. The processing factor (Pf, the concentration (mg/kg) of pesticide in product/that in soybean) of tofu ranged from 0.026 to 0.28. These values varied among pesticides. There was a high correlation between the log P(ow) and the transfer ratio of tofu. The test described here should be useful to obtain the transfer ratios of pesticide residues in processing and/or cooking steps.     

The Association of Cholesterol Uptake and Synthesis with Histology and Genotype in Cortisol-Producing Adenoma (CPA)

Cortisol-producing adenoma (CPA) is composed of clear and compact cells. Clear cells are lipid abundant, and compact ones lipid poor but associated with higher production of steroid hormones. PRKACA mutation (PRKACA mt) in CPA patients was reported to be associated with more pronounced clinical manifestation of Cushing’s syndrome. In this study, we examined the association of histological features and genotypes with cholesterol uptake receptors and synthetic enzymes in 40 CPA cases, and with the quantitative results obtained by gas chromatography-mass spectrometry (GC-MS) analysis in 33 cases to explore their biological and clinical significance. Both cholesterol uptake receptors and synthetic enzymes were more abundant in compact cells. GC-MS analysis demonstrated that the percentage of compact cells was inversely correlated with the concentrations of cholesterol and cholesterol esters, and positively with the activity of cholesterol biosynthesis from cholesterol esters. In addition, hormone-sensitive lipase (HSL), which catalyzes cholesterol biosynthesis from cholesterol esters, tended to be more abundant in compact cells of PRKACA mt CPAs. These results demonstrated that both cholesterol uptake and biosynthesis were more pronounced in compact cells in CPA. In addition, more pronounced HSL expression in compact cells of PRKACA mt CPA could contribute to their more pronounced clinical manifestation.     

Ionization probability of secondary ions sputtered from Si(1 1 1) and Ge(1 1 1) surfaces

We have measured the energy distributions of the secondary ions sputtered from the Si(1 1 1) and Ge(1 1 1) surfaces and investigated the ionization probabilities of sputtered Si⁺ and Ge⁺ ions for clarifying their ionization mechanisms. The observed ionization probabilities depend on the velocity of Si⁺ and Ge⁺ ions. This velocity dependence can be successfully analyzed by a theoretical expression, which was proposed originally for the metal surfaces. This implies that the ionization mechanism of Si⁺ and Ge⁺ ions is the same as ions sputtered from the metal surface, i.e., the resonant electron transfer in the high velocity regime and the thermal excitation process in the low velocity regime. The difference in the ionization probability between Si⁺ and Ge⁺ ions is well explained by the difference in the band gap energy.     

Analysis of imazalil and its major metabolite in citrus fruits by GC-FTD

A simplified simultaneous analytical method of imazalil (IZ) and its major metabolite, alpha-(2,4-dichlorophenyl)-1H-imidazole-1-ethanol (IZM), in citrus fruits was developed, and commodities samples were investigated. A homogenate of citrus fruits was extracted with ethyl acetate under basic conditions. The crude extract was partitioned between 0.025 mol/L of sulfuric acid and ethyl acetate. The analytes were extracted from the aqueous fraction under basic conditions with ethyl acetate. The extract solution was purified with an ENVI-Carb cartridge, and then analyzed by GC-FTD and GC/MS. Recoveries of IZ and IZM added to grapefruit at the level of 0.05 microgram/g were 90.0 and 108.7%, and those in the case of lemon were 100.4 and 93.0%, respectively. The detection limits were 0.01 microgram/g in samples. By this method, IZ and IZM were analyzed in 46 citrus fruits on the market and were detected simultaneously in some samples.     

Oxidation of Fe (II) in sulfuric acid solutions with dissolved molecular oxygen

The oxidation of Fe(II) with dissolved molecular oxygen was studied in sulfuric acid solutions containing 0.2 mol . dm^-3 FeSO₄ at temperatures ranging from 343 to 363 K. In solutions of sulfuric acid above 0.4 mol . dm^-3, the oxidation of Fe (II) was found to proceed through two parallel paths. In one path the reaction rate was proportional to both [Fe²⁺]² and po₂, exhibiting an activation energy of 51.6 . kJ mol^-1. In another path the reaction rate was proportional to [Fe²⁺]², [SO_4-], and po₂ with an activation energy of 144.6 kJ . mol^-1. A reaction mechanism in which the SO_4- ions play an important role was proposed for the oxidation of Fe(II). In dilute solutions of sulfuric acid below 0.4 mol . dm^-3, the rate of the oxidation reaction was found to be proportional to both [Fe(II)]² and Po₂, and was also affected by [H⁺] and [SO_2- ⁴]. The decrease in [H⁺] resulted in the increase of reaction rate. The discussion was further extended to the effect of Fe (III) on the oxidation reaction of Fe (II).