Age-related accumulation of phosphatidylcholine hydroperoxide in cultured human diploid cells and its prevention by α-tocopherol

The levels of phosphatidylcholine hydroperoxide in serially cultured human fetal diploid fibroblasts at various population doubling levels were determined by high-performance liquid chromatography combined with chemiluminescence detections. This methodology utilizes a mixture of cytochromec and luminol as post-column hydroperoxide group specific luminescent reagents. The cellular hydroperoxide content increased with age from 0.34 to 27.72 pmol/10⁶ cells. At the end of the cells'in vitro lifespan (51st population doubling level), the hydroperoxide content per 10⁶ cells reached about 80 times the level found in cells of the 20th population doubling level. Supplementation of exogenous α-tocopherol to the culture medium prevented hydroperoxide accumulation, but did not extent the lifespanin vitro. The results indicate that substantial intracellular phospholipid hydroperoxide accumulation occurred in the course of aging of human fetal liploid fibroblasts.     

New ring-opening polymerization via a π-allylpalladium complex

Summary A binary system of a palladium complex as catalyst and zinc alkoxide as initiator conducted a novel ring-opening polymerization of cyclic carbonate, i. e., 5,5-dimethyl-4-ethenyl-1,3-dioxan-2-one. The polymerization proceeded along with releasing carbon dioxide to produce the corresponding polyether. The -allylpalladium complex generated from the monomer with the catalyst is the key intermediate for this new polymerization. The propagating end is zinc alkoxide, which nucleophilically attacks the monomer activated as the -allylpalladium complex in the propagation.     

Examination of acetolysis products of phosphatidylcholine by gas chromatography-mass spectrometry

A comparison of monoacetyldiglycerides obtained from authentic phosphatidylcholines by acetolysis with those obtained by phospholipase C-acetylation was made to examine the intermolecular acyl migration, the intramolecular acyl migration between C-1 and C-2, and the formation of 1,3-isomer in the acetolysis reaction. Egg yolk phosphatidylcholine also was used. It was revealed that is acetolysis, the intermolecular acyl migration and selective degradation of polyunsaturated fatty acids did not take place at all. The intramolecular acyl migration, including the formation of 1,3-isomer, occurred to a small extent. Appreciable difference was not found in comparison of molecular species compositions of monoacetyldiglycerides derived by both methods from egg yolk phosphatidylcholine, except small differences found in the contents of two kinds of molecular species.     

Polymerization of epoxide with aluminum complex/silanol catalyst. VII. Thermal and electrical properties of epoxy resin cured with the new catalyst

Curing catalyst for epoxy resins was newly found. The catalyst consists of aluminum complex and silanol. Lack of one component of the pair does not cure epoxy resins. The epoxy resins cured with the catalyst are characterized by excellent electrical properties, especially at high temperature, due to the absence of strong acid species in the cured epoxy resin matrix. Heat-resistant property of the resin was also excellent. These properties were compared with those of epoxy resin cured with commonly used BF₃ complex.     

Isotactic polypropylene hollow microfibers prepared by CO2 laser‐thinning

An isotactic polypropylene hollow microfiber was continuously produced by using a carbon dioxide (CO₂) laser‐thinning method. To prepare the hollow microfiber continuously, the apparatus used for the thinning of the solid fiber was improved so that the laser can circularly irradiate to the hollow fiber. Original hollow fiber with an outside diameter (OD) of 450 μm and an internal diameter (ID) of 250 μm was spun by using a melt spinning machine with a specially designed spinneret to produce the hollow fiber. An as‐spun hollow fiber was laser‐heated under various conditions, and the OD and the ID decreased with increasing the winding speed. For example, when the hollow microfiber obtained by irradiating the CO₂ laser to the original hollow fiber supplied at 0.30 m min^?1 was wound up at 800 m min^?1, the obtained hollow microfiber had an OD of 6.3 μm and an ID of 2.2 μm. The draw ratio calculated from the supplying and the winding speeds was 2667‐fold. The hollow microfibers obtained under various conditions had the hollowness in the range of 20–30%. The wide‐angle X‐ray diffraction patterns of the hollow microfibers showed the existence of the highly oriented crystallites. Further, the OD and ID decreased, and the hollowness increased by drawing hollow microfiber obtained with the laser‐thinning. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 2600–2607, 2006     

Application of CO2 laser heating zone drawing and zone annealing to nylon 6 fibers

Nlon 6 fibers were zone drawn and zone annealed by using a continuous wave carbon dioxide laser to develop their mechanical properties. A laser‐heating zone drawing was carried out under a applied tension of 35.4 MPa at a power density of 9.65 W · cm^?2, and then the zone‐drawn fiber was annealed. A laser‐heating zone annealing was carried out in two steps at a power density of 9.65 W · cm^?2; the first step was carried out under 423 MPa and the second under 517 MPa. The treating temperature of the fiber heated by the CO₂ laser was measured by using an infrared thermographic camera equipped with a magnifying lens. The treating temperature at the zone drawing is 138°C, and those at the first and the second zone annealing are 121 and 125°C, respectively. The second laser‐heated zone‐annealed fiber has a birefringence of 65.2 × 10^?3, a degree of crystallinity of 54%, and a storage modulus of 21 GPa at 25°C. Wide‐angle X‐ray diffraction patterns for the laser‐heated zone‐drawn and the zone‐annealed fibers show (200) reflection and (002/202) doublet due to only an α form on the equator. The laser‐heated zone‐drawn fiber has a melting endotherm peaking at 216°C and a trace of shoulder on the higher temperature side of its peak, and the laser‐heated zone‐annealed fibers have a single melting endotherm peaking at 216°C. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1711–1716, 2002     

Orientation in uniaxially drawn polystyrene plasticized by CO2 sorption

Uniaxial drawing experiments of the polystyrene films plasticized by a sorption of compressed CO₂ gas at pressures up to about 18 MPa were carried out with strain rates ε of 0.0290 and 0.0079 s^?1. The drawing was performed successfully with draw ratio λ up to 4 at the temperatures of 308.15, 318.15, 328.15, and 338.15 K. The Hermans orientation function f of the drawn samples was determined from the dichroic ratio measured by an infrared spectrophotmeter. While f value increases with increasing ε or λ, it decreases with increasing CO₂ pressure or temperature. © 1995 John Wiley & Sons, Inc.     

Studies on the nuclear magnetic resonance spectra of olefinic protons of conjugated fatty acid methyl esters

The NMR spectra of olefinic protons in the four representative conjugated fatty acid methyl esters, methylcis-9,trans-11-octadecadienoate, methyltrans-9,trans-11-octadecadienoate, methyl α eleostearate, and methyl β eleostearate, were studied. The chemical shift of each olefinic proton in these compounds was determined by considering their intramolecular environment. Coupling constants were also obtained as the results of spectral analysis.     

Partial oxidation of ethane to synthesis gas over Co-loaded catalysts

Attention has been increasingly paid to the partial oxidation of lower alkanes to synthesis gas, due to its intrinsic energy saving process. We studied the partial oxidation of ethane (POE) on Co loaded on various supports. The POE performance varied as follows: Y₂O₃, CeO₂, ZrO₂, La₂O₃  SiO₂, Al₂O₃, TiO₂ > MgO. Comparing Y₂O₃ and CeO₂, the carbon deposition during the POE was negligible on CeO₂ and therefore CeO₂ was the most preferable support. By changing space velocity and O₂ partial pressure, reaction mechanism of POE was studied and it was revealed that two-step mechanism was prevailing; combustion of ethane to H₂O and CO₂ and subsequent reforming of ethane with H₂O and CO₂ to synthesis gas. Co/CeO₂ catalyst exhibited high and stable catalytic activity for 10 h; high ethane conversion of 18% (maximum ethane conversion 20% at O₂/C₂H₆ = 0.2) with H₂ and CO selectivities of 93 and 84%, respectively.