Passive piezoelectric single-side MEMS DC current sensor with five parallel PZT plates applicable to two-wire DC electric appliances without using cord separator

A passive (power-less), non-contact macro-scale piezoelectric bimorph DC current sensor to satisfy the increasing needs of DC power supply for monitoring the electricity consumption by either one-wire or two-wire appliance cord was proposed at our laboratory previously. In present study however, a MEMS-scale piezoelectric single-side DC current sensor, comprised of five parallel PZT plates, was further proposed and micro-fabricated for preliminarily examination. A micro magnet was fixed by manipulator onto the PZT cantilever tip to the theoretically pinpointed position of the center plate. Different from the results of the macro-scale piezoelectric bimorph DC current sensor, impulsive piezoelectric output voltages accompanying with a gradual decrease in decay were detected when the applied DC electric current was varied from 0.5 to 2.5 A. A linear relationship between the detected peak value of the impulse output voltage and the applied DC electric current was also obtained but with a higher slope compared to the result of the macro-scale piezoelectric bimorph DC current sensor.     

Effect of drawing condition on mechanical properties and molecular orientation of self-reinforced poly(lactic acid) screws

Effects of extrusion ratio (ER) during extruding on mechanical properties of poly(lactic acid) (PLA) screws were investigated in terms of shear and twist strength. Shear strength increased by drawing, while twist strength decreased. This might be due to orientation of molecular chains during drawing. In order to evaluate orientation of molecular chains, orientation function in extruded billets was measured as a function of ER. Since orientation function increased with ER, drawing is effective method to improve shear strength of screw, where fibrous structure which was formed during extruding resisted shear stress in cross-section perpendicular to screw axis. Although orientation functions for billet extruded at ER 1.3–4 were equivalent, both strengths changed for the screw extruded at the range of this ER. Infrared spectra suggested transforming from α to β crystal for the billet extruded at the range of this ER. This result suggested that mechanical properties of screw also depended on the crystal forms.     

Simplified resazurin rennet test for diagnosis of mastitis.

A simplified resazurin rennet test for diagnosis of bovine mastitis was devised. A tablet of resazurin and rennet was placed in a sterile test tube to which 10 ml of milk were added directly from a teat. The test tube was incubated for 1 h at 37 C. After incubation the change in color of resazurin and the time required for coagulation by the rennet were observed. From the results the milk samples tested were classified into four types. Cell count, modified California Mastitis Test, coagulase positive staphylococci, and contents of solids-not-fat, lactose, and protein differed among the four types. This method is simple and practically useful for diagnosis of bovine mastitis.     

Effect of blending on liquefaction of coals

After solvent extraction of Taiheiyo, Miike and Balmer coals using wash oil under nitrogen atmosphere at 370 °C for 30 min, the extraction yield is always within the additivity law. Further studies used Yallourn, Soyakoishi, Taiheiyo, Horonai, Miike, Shin Yubari, Balmer coals and their blends which were hydrogenated in tetralin, wash oil or creosote oil, with or without catalyst, at 400–450 °C under 10 or 3 MPa of initial hydrogen pressure. When hydrogen is available, the additivity law exists for blended coals, but when the hydrogen supply is deficient, the experimental conversion of blended coals is always lower than calculated conversions. This may be due to the faster consumption of the hydrogen by more reactive coals and thus the less reactive coals were unable to react with hydrogen.     

Development of localization system using ultrasonic sensor for an underwater robot to survey narrow environment

This paper describes a localization system for a swimming robot to survey underwater narrow environments. In that environment, external sensors cannot be set up to localize the robot position, as there are many structures and the robot moves three-dimensionally. Therefore, the position needs to be calculated only by internal sensors. In this work, a new localization method based on map-matching is proposed, referring to cross-sectional shape data cut from a three-dimensional computer-aided design (CAD) data as an environmental map and structural shapes measured by a range sensor. As a range sensor, an ultrasonic sensor which is two-dimensional scanning-type was developed. The reflected signals of the ultrasonic sensor have some noise. Only structural shape data are extracted from the reflected signals. The image correlation is used as the matching method. Experiments to evaluate the performance of the proposed system were implemented at a mock-up environment. As a result, it was confirmed that the position was detected with an accuracy of 100 mm. The error is mainly caused by measurement error of the ultrasonic sensor that is used to calculate structural shapes. We concluded to improve the measurement accuracy of the ultrasonic sensor to reduce localization error.     

Immobilization of Glucose Isomerase in Microbial Cells. Part 2. Properties of Immobilized Glucose Isomerase in Cell Granule Preparations

Some properties of immobilized glucose isomerase in whole cell preparations were investigated. Immobilized glucose isomerase showed a similar velocity pattern to the native free enzyme. But the reaction system of immobilized enzyme was thought to be influenced by diffusion. The immobilized enzyme was much superior to the free enzyme in heat and pH stability and resistance to the inhibitory effect of several metal ions. In continuous process immobilized glucose isomerase showed a considerable durability. Decrease of activity of the immobilized enzyme column was approximately expressed by an exponential function of time.     

Mixing effects of metal hydrides on equilibrium behavior and reaction kinetics

Mixing effects of hydriding alloys on equilibrium and kinetic properties are studied, and experimental results are presented for the binary mixtures of LaNi₅/TiMn_1.5, MmNi₅/TiMn_1.5, MmNi_4.8Al_0.2/TiMn_1.5, and LaNi₅/Ti_0.8Zr_0.2Cr_0.8Mn_1.2 under isothermal conditions of 30–60°C with 10° intervals. Major known advantages of mixing are to give desirable P-T-C properties, to enhance reaction rate, and to increase the available temperature and pressure ranges. The authors' objective is to provide a method of designing a particular pair of hydride mixtures with increased hydride composition ranges for transferring hydrogen fairly quickly, increasing availability, improving unit performance, and increasing operational flexibility for a given application.     

Seismic proof test of a reinforced concrete containment vessel (RCCV): Part 2: Results of shaking table tests

A 1/8-scale model was constructed of a reinforced concrete containment vessel (RCCV) used in the latest advanced boiling water reactors (ABWR). Shaking table tests were conducted on it with input motions corresponding to or exceeding a design earthquake assumed for a real Nuclear Power Plant.The objectives of the tests were to verify the structural integrity and the leak-proof functional soundness of the RCCV subjected to design earthquakes, and to determine the ultimate strength and seismic margin by an excitation that led to the model's collapse. The model, the test sequence and the pressure and leak test results were addressed in Part 1. The shaking table test method, the input motions and the test results, including the transition of the model's stiffness, natural frequencies and damping factors and the effects of vertical input motions and internal pressure on the model's characteristics and behavior, the load–deformation, the ultimate strength, the failure mode of the reinforced concrete portion and the liner plate are described here. The seismic safety margin that was evaluated by the energy input during the failure test to a design basis earthquake will be described in Part 3. The analytical results of simulation using the multi-lumped mass model will be described in Part 4.     

Adaptation to climate change and conservation of biodiversity using green infrastructure

In recent years, we have experienced mega‐flood disasters in Japan due to climate change. In the last century, we have been building disaster prevention infrastructure (artificial levees and dams, referred to as “grey infrastructure”) to protect human lives and assets from floods, but these hard protective measures will not function against mega‐floods. Moreover, in a drastically depopulating society such as that in Japan, farmland abandonment prevails, and it will be more difficult to maintain grey infrastructure with a limited tax income. In this study, we propose the introduction of green infrastructure (GI) as an adaptation strategy for climate change. If we can use abandoned farmlands as GI, they may function to reduce disaster risks and provide habitats for various organisms that are adapted to wetland environments. First, we present a conceptual framework for disaster prevention using a hybrid of GI and conventional grey infrastructure. In this combination, the fundamental GI, composed of forests and wetlands in the catchment (GI‐1) and additional multilevel GIs such as flood control basins that function when floodwater exceeds the planning level (GI‐2) are introduced. We evaluated the flood attenuation function (GI‐1) of the Kushiro Wetland using a hydrological model and developed a methodology for selecting suitable locations of GI‐2, considering flood risk, biodiversity and the distribution of abandoned farmlands, which represent social and economic costs. The results indicated that the Kushiro Wetland acts as a large natural reservoir that attenuates the hydrological peak discharge during floods and suitable locations for introducing GI‐2 are concentrated in floodplain areas developing in the downstream reaches of large rivers. Finally, we discussed the network structure of GI‐1 as a hub and GI‐2 as a dispersal site for conservation of the Red‐crowned Crane, one of the symbolic species of Japan.