Spray-dry synthesis of β-Cu1.8Zn0.2V2O7 ceramic fine particles showing giant negative thermal expansion

We used spray-dry method to synthesize fine powder of β-Cu_1.8Zn_0.2V₂O₇ showing large negative thermal expansion (NTE) linearly to temperature over a wide temperature range. The NTE of β-Cu_1.8Zn_0.2V₂O₇ is produced by microstructures consisting of voids and anisotropic thermal deformation of crystal grains in ceramics. By reducing the size of the microstructures that produce NTE, large NTE equivalent to that of bulk was realized, even for ceramic particles of about 2 μm size. Comparison with particles produced using a conventional method demonstrates that the particle size distribution is narrow and that the particles are nearly spherical. This achievement is expected to pave the way to use of NTE materials in micrometer-scale control of thermal expansion.     

A molten metal jet impingement on a flat spreading surface

ABSTRACT

In the event of a severe accident, past experiences such as Three Mile Island and Fukushima Daichi have shown that the reactor core of a light-water nuclear reactor, if not properly safeguarded, could go through a meltdown. This will be followed by the formation of a corium, a mix of molten fuel elements, and liquid metals from the Reactor Pressure Vessel (RPV). In the worst-case scenario, a melt through from the RPV can occur and lead to the spreading of the corium, in the form of a molten element’s jet impinging on a flat concrete structure of the Primary Containment Vessel (PCV). To enhance the decommissioning and the safety procedure, scope of the present article is to deepen the understanding of the phenomena involved in the mentioned scenario, mainly jet-instability and molten material spreading. In the present study, experiments were carried out, by using corium simulant materials such as Copper and Tin, to investigate the link between the instability of the gravity-driven molten metal jet and the impinging followed by its spreading over a flat area.     

Effect of Sliding History on Super-Low Friction of Diamond-Like Carbon Coating in Water Lubrication

Water lubrication using diamond-like carbon (DLC) coatings is regarded as being a promising eco-friendly technology. However, it has been reported that delamination of DLC coatings occurs in water. The authors clarified that the application of friction in ambient air prior to self-mating DLC water lubrication, in addition to the suppression of DLC delamination, caused the friction coefficient to decrease more than when no processing is performed in the boundary lubrication region. When compared to the case when there was no pre-sliding, in terms of the wear scar, in this case, a much more hydrophilic and smoother surface was formed. Therefore, the friction-reducing process in water due to the presence of a sliding history (pre-sliding in ambient air) was clarified by an analysis of the DLC geometry, structure, chemical state and an in situ analysis that can measure the friction properties and the chemical state of DLC. We clarified that the process in which the oxidation and structural changes of the DLC proceed at the time of pre-sliding in ambient air using in situ Fourier transform infrared spectroscopy–attenuated total reflection. It was also revealed that the OH termination subsequently accelerated rapidly due to the friction in water after pre-sliding process. In addition, a time-of-flight secondary ion mass spectrometry analysis revealed that this OH group was derived from the lubricating water and unlike the case in which there was no pre-sliding in ambient air, the rate at which OH terminates increased considerably.     

Effects of growth temperature on the fatty acid composition of the free-living nematodeCaenorhabditis elegans

The effects of growth temperature on the fatty acid compositions of the phosphatidylcholine (PC), phosphatidylethanolamine (PE), and total lipid (TL) fractions of the free-living nematodeCaenorhabditis elegans were investigated. A reduction in growth temperature from 25 to 15°C caused the proportions of eicosapentaenoic acid (20∶5n-3) to increase from 23.6 to 32.5% in the PC, from 7.4 to 10.8% in the PE, and from 12.9 to 19.9% in the TL fractions. Conversely, the levels of dihomo-γ-linolenic acid (20∶3n-6) and arachidonic acid (20∶4n-6) in these phospholipid fractions and the TL fraction both decreased with decreasing growth temperature. Analysis of the positional distribution of fatty acids in the PC fraction revealed that the change in the composition of C₂₀ polyunsaturated fatty acid was obvious in positionsn-2. Lowering the growth temperature induced an increase in the level of the diacyl subclass of PE from 58% at 25°C to 71% at 15°C, with a concomitant decrease in the levels of the alkylacyl and alkenylacyl subclass of PE ofC. elegans. These changes observed in the phospholipids ofC. elegans might be one mechanism for adaptation to low temperature. Lipids 31, 1173–1178 (1996).     

High-speed operation in printed organic inverter circuits with short channel length

We have demonstrated fast operation of printed organic inverter circuits. We employ a soluble organic semiconducting material which has high field-effect mobility and ink-jet printed source/drain electrodes with short channel length. Appropriate concentration of the semiconducting solution and modification layer of source/drain electrodes improve both mobility and on/off ratio. The fabricated transistors with a short channel length (4 μm) exhibit excellent mobility (1.2 cm²/V s), high on/off ratio (>10⁵) and operational stability. The diode-load inverter with a narrow channel and low parasitic capacitance operate at 8 kHz at 20 V. These results will lead to significant progress in applications of printed organic circuits.     

Organofunctionalized catalyst surfaces highly active and selective for carbon–carbon bond-forming reactions

This article illustrates two types of organofunctionalized heterogeneous catalysts for variety of organic carbon–carbon bond-forming reactions, summarizing our previous reports and also presenting new data. Organic amines with an alkoxysilane moiety were immobilized on inorganic silica-alumina surfaces (SA-NR₂) by simple silane-coupling reactions between the silica-alumina surface (SA) and the alkoxysilane. This SA-NR₂ acted as acid–base bifunctional heterogeneous catalysts for carbon–carbon bond-forming reactions, such as cyano-ethoxycarbonylation, Michael reaction of nitriles, and nitro-aldol reaction. These reactions did not occur with either SA or homogeneous amine compounds. In addition, the mixture of SA and homogeneous amine showed low catalytic activity due to undesirable acid–base neutralization reaction. Achiral organic silane-coupling reagents with a variety of functional groups were also immobilized on a SiO₂ surface that had been immobilized with chiral bis(oxazoline) (BOX), to which Cu ions were coordinated to make chiral Cu–BOX complexes on the SiO₂ surface. The SiO₂-supported Cu–BOX complex catalyst functionalized with achiral 3-methacryloxypropyltrimethoxysilane dramatically increased enantioselectivity in the asymmetric Diels–Alder reaction of cyclopentadiene and 3-acryloyl-2-oxazolidinone. The organofunctionalized catalysts showed much better performances for the C–C bond-forming reactions compared to the corresponding homogeneous systems. The heterogeneous catalysts thus obtained were characterized by solid-state ¹³C and ²⁹Si MAS NMR, FT-IR, UV/vis, XAFS, ESR, XRF, and elemental analysis.     

Growth and differentiation potentials in confluent state of culture of human skeletal muscle myoblasts

The transitional behaviors of myoblasts toward differentiation were investigated in the cultures at the low and high seeding densities (respectively, X₀ = 1.0 × 10³ and 2.0 × 10⁵ cells/cm²). In the culture at the low seeding density, an increase in confluence degree accompanied a decrease in growth potential (R_p), being R_p = 0.85 and 0.11 at t = 48 and 672 h, respectively. Myoblasts seeded at the high density resulted in the immediate cessation of growth with keeping the low range of R_p = 0.02–0.09 throughout the culture. The reduction of R_p led to the generation of three subpopulations of cells in proliferative, quiescent and differentiated states. Close cell contacts in the confluent state of high seeding culture induced cell quiescence to a higher extent with suppressing differentiation.     

Flight Model Performance of 640-GHz Superconductor–Insulator–Superconductor Mixers for JEM/SMILES Mission

Performances of 640-GHz Superconductor–Insulator–Superconductor (SIS) mixers developed for the Superconducting Submillimeter-Wave Limb-Emission Sounder (SMILES) mission are described. SMILES, launched in September 2009, is the first mission to observe atmosphere from space using superconducting mixers. Ground test performances of the SIS mixers show very flat gain and noise characteristics in their observation bands in compliance with the specifications required for SMILES.