The pharmacokinetics of water-in-oil-in-water-type multiple emulsion of a new tacrolimus formulation

We developed a water-in-oil-in-water (W/O/W)-type multiple emulsion of a new tacrolimus formulation. A potential approach to avoid the complications of systemic immunosuppression and simultaneously enhance immunosuppressive efficacy is to deliver immunosuppressive agents locally to the site of the target organs. The W/O/W emulsion is dispersed oil drops containing smaller water droplets that allow the delivery of drugs preferentially to the reticuloendothelial system (RES). Since the liver and the spleen are primary components of the RES, and the brain and the kidney have a poor RES, we hypothesized that a W/O/W emulsion of tacrolimus would prossess the pharmacokinetic benefits of local immunosuppression. We evaluated this hypothesis in a rat model. The tacrolimus levels of whole blood, the liver, spleen, brain, and kidney in rats given intravenous emulsions of tacrolimus (W/O/W group) were compared with a group administered tacrolimus alone (T group). There were no significant differences between the pharmacokinetic parameters of W/O/W group and T group based on whole blood data. However, the W/O/W group had significantly decreased tacrolimus levels in the brain and kidney, and significantly increased levels in the liver and spleen compared with the T group. These data suggest that the W/O/W emulsion is applicable as an intravenous drug carrier for local immunosuppression.     

The effect of salinity on nitrite accumulation in a down‐flow hanging sponge reactor

BACKGROUND: In this study, the inductive effect of salinity on nitrite accumulation in a down‐flow hanging sponge (DHS) reactor, developed as a novel and cost‐effective wastewater treatment process, was evaluated by conducting a long‐term continuous experiment lasting more than 1400 days. RESULTS: The influent salinity was controlled by adding NaCl at concentrations ranging from 0 to 25 g Cl^? L^?1. The effluent nitrite increased with increases in salinity, i.e. the fraction of nitrite to total nitrogen in the effluent increased from 1.6% at 0 g Cl^? L^?1 to 87.6% at 25 g Cl^? L^?1. Fluorescence in situ hybridization (FISH) analysis revealed that as salinity increased, the nitrifying bacterial community in the DHS changed markedly at the species level. In particular, the dominant nitrite‐oxidizing bacteria changed from Nitrospira‐sublineage I at 0 g Cl^? L^?1 to Nitrobacter spp. at 15 g Cl^? L^?1. At 25 g Cl^? L^?1, no nitrite‐oxidizing bacteria were detected. CONCLUSION: Our findings suggest that the DHS reactor is suitable for cost‐effective nitrite production processes and that salinity control using NaCl is an effective method for inducing nitrite accumulation. Copyright © 2012 Society of Chemical Industry     

Modification of Rheological Properties Under Elongational Flow by Addition of Polymeric Fine Fibers

A new technique to provide melt elasticity using flexible fine fibers prepared from a polymer with high melting point is demonstrated. A polymer composite of poly(propylene) with a small amount of fine fibers of poly(butylene terephthalate) shows marked strain‐hardening behavior in elongational viscosity, i.e., a rapid increase in the transient elongational viscosity with time or strain. The blend also shows prominent normal stress difference at steady shear. These elastic properties have not been observed for polymer composites with rigid fibers and can be applicable to the modification of rheological properties and thus the improvement of processability.

     

Synthesis and chemical properties of polyethyleneimines crosslinked by penta-2,4-dienylideneammonium unit

The reaction of N-(2,4-dinitrophenyl)pyridinium anion ( salt(A) ; A = Cl⁻, FeCl₄⁻, and (CN)₂N⁻) with linear polyethyleneimine (LPEI; M_n = 20 380) and branched polyethyleneimines (BPEI1; M_n = 600, BPEI2; M_n = 10 000) at various molar feed ratios without using a catalyst resulted in pyridinium ring opening to yield ionic LPEI and BPEIs that were crosslinked by conjugated penta-2,4-dienylideneammonium (PDA) units, LPEI-PDA , BPEI1-PDA , and BPEI2-PDA , respectively. A model compound was synthesized by the reaction of salt(Cl) with diethylamine. The solubilities of BPEI1-PDA and BPEI2-PDA depended on the feed ratios between salt(Cl) and BPEI1 or BPEI2. Dipping LPEI-PDA into water and methanol yielded hydro- and organogels, respectively. UV–vis and reflection measurements revealed an expanded π-conjugation length between the polymer chains due to the through-space orbital interaction of the electrons on the two nitrogen atoms at the crosslinked positions in LPEI-PDA , BPEI1-PDA , and BPEI2-PDA . Cyclic voltammetry analysis suggested that the polymers underwent electrochemical oxidation. Measurement using a superconducting quantum interference device (SQUID) indicated that LPEI-PDA having FeCl₄⁻ anions was paramagnetic. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48712.     

采用MAMMOS技术的高密度光记录

MAMMOS(Magnetic Amplifying Magneto－ Optical System:磁畴扩大磁光系统 )是实现高密度磁光盘的有效方法。不仅能得到不依赖于磁畴长度的较大的读出信号振幅,而且还能实现超出光学系统衍射极限的分辨率。过去,为实现磁畴的复印与扩大,要对记录膜面施加垂直方向的外部磁场。而现在得知,同时施加垂直磁场和水平方向的磁场,可大幅度地提高微小磁畴的读出特性。确认采用施加水平磁场的方法,在λ =635 nm, NA=0.55的条件下, 0.15μ m的连续磁畴也能获得 BER=2× 10－ 4的读出效果。     

Spray-dry synthesis of β-Cu1.8Zn0.2V2O7 ceramic fine particles showing giant negative thermal expansion

We used spray-dry method to synthesize fine powder of β-Cu_1.8Zn_0.2V₂O₇ showing large negative thermal expansion (NTE) linearly to temperature over a wide temperature range. The NTE of β-Cu_1.8Zn_0.2V₂O₇ is produced by microstructures consisting of voids and anisotropic thermal deformation of crystal grains in ceramics. By reducing the size of the microstructures that produce NTE, large NTE equivalent to that of bulk was realized, even for ceramic particles of about 2 μm size. Comparison with particles produced using a conventional method demonstrates that the particle size distribution is narrow and that the particles are nearly spherical. This achievement is expected to pave the way to use of NTE materials in micrometer-scale control of thermal expansion.     

Synthesis and characterization of chitosan/poly(acrylic acid) polyelectrolyte complex

Polyelectrolyte complex based on chitosan and acrylic acid monomer by photoinitiated free‐radical polymerization in the absence of crosslinker showed a large transition in swelling in response to changes in pH of surrounding medium. Their ability to swell arises from polyelectrolyte interactions and molecular structure of the complex. The main properties of interest that related to the molecular structure, swelling volumes, glass transition temperature, and elastic modulus of the complex were investigated. The effect of water content, the only variable in the sample component, played an important role in molecular structure of the complex and as a consequence, the extent of intermolecular linkage, especially amide bonds which in turn governed the degree of swelling of the polyelectrolyte complex in this study. The decreased degree of swelling and higher temperature shift of glass transition temperature was found with increased water content, whereas increased modulus of elasticity of dry complex was found in lower water content of synthesis component. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1025–1035, 2002     

均相玻璃态高分子中溶剂扩散系数的数学模型

以自由体积理论为基础 ,提出改良的玻璃态高分子中溶剂扩散系数的数学模型 .模型推导过程中考虑了溶剂可塑化效应对高分子凝聚态的影响 ,并以明确的物理概念计算玻璃态聚合物的自由体积 .对橡胶态适用的自由体积参数在此模型中保持有效 ,所引入的表达溶剂可塑化效应的唯一参数 β可以通过计算玻璃化温度来确定 .所以 ,本模型中无可调节参数存在 ,具有完全可预测性 .以芳香族溶剂苯、甲苯、乙苯在玻璃态聚苯乙烯和聚甲基丙烯酸甲酯中的扩散系数为例对模型进行验证 ,理论计算结果和实验值取得良好一致     

Dynamic Mechanical Properties and Adhesive Joint Strengths of Emulsion Polymers Produced by Power Feed Technique. III. Adhesive Joint Strengths of Grafted Power Feed Copolymer

Power feed copolymers were synthesized using styrene and n-butyl acrylate through non-uniform feeding emulsion polymerization. Poly(vinyl alcohol) (PVA) was used as a protective colloid, onto which vinyl monomers were grafted. Power feed copolymer had a very broad glass transition temperature compared with random copolymer, even if grafting and/or crosslinking were introduced to the system. This tendency was almost the same as the non-grafted power feed copolymer where only low molecular weight surfactant was used.

Adhesive joint strengths of power feed copolymers were evaluated compared with random copolymers. In the case of usual linear power feed copolymer, the adhesive joint strengths were not higher than those of random copolymer, which was considered to be due to the lower film strengths of the power feed copolymer. Power feed copolymer having grafting showed slightly higher adhesive joint strengths over a wide range of temperatures than random copolymer. When crosslinking was introduced to the system, power feed copolymer showed much higher adhesive joint strengths over a wide temperature range.     

Rh/γ-Al2O3 Catalytic Layer Integrated with Sol–Gel Synthesized Microporous Silica Membrane for Compact Membrane Reactor Applications

An efficient and compact catalytic membrane reactor for reforming of CH₄ was developed by integrating a hydrogen perm-selective silica membrane with an Rh/-Al₂O₃ catalyst layer. The catalytic layer was sandwiched between the outer surface of the -Al₂O₃ support tube and the silica membrane with an aim of improving the heat and mass transfer rates through the system and to simplify the reactor geometry. The system showed improved efficiency for reforming of CH₄ at comparatively lower operating temperatures and steam to C molar ratios than the conventional fixed-bed steam reforming systems. Under optimized conditions, a nearly 25-30% improvement from the equilibrium conversion level was achieved as a result of abstraction of hydrogen from the product stream by the silica membrane integrated with the catalyst layer. The performance of the system was evaluated as a function of various process parameters. Because of the compactness and efficiency, the present system emerges as a promising alternative to the conventional membrane reactors, which possess separate catalytic and membrane units.