Efficient Assembly of Bridged β‐Ga2O3 Nanowires for Solar‐Blind Photodetection

An increasing number of applications using ultraviolet radiation have renewed interest in ultraviolet photodetector research. Particularly, solar‐blind photodetectors sensitive to only deep UV (<280 nm), have attracted growing attention because of their wide applicability. Among recent advances in UV detection, nanowire (NW)‐based photodetectors seem promising, however, none of the reported devices possesses the required attributes for practical solar‐blind photodetection, namely, an efficient fabrication process, a high solar light rejection ratio, a low photocurrent noise, and a fast response. Herein, the assembly of β‐Ga₂O₃ NWs into high‐performance solar‐blind photodetectors by use of an efficient bridging method is reported. The device is made in a single‐step chemical vapor deposition process and has a high 250‐to‐280‐nm rejection ratio (～2 × 10³), low photocurrent fluctuation (<3%), and a fast decay time (<<20 ms). Further, variations in the synthesis parameters of the NWs induce drastic changes in the photoresponse properties, which suggest a possibility for tuning the performance of the photodetectors. The efficient fabrication method and high performance of the bridged β‐Ga₂O₃ NW photodetectors make them highly suitable for solar‐blind photodetection.     

Effect of different features to drill-wear prediction with back propagation neural network

In this paper, a back propagation neural network (BPNN) has been applied to predict the corner wear of a high speed steel (HSS) drill bit for drilling on different workpiece materials. Specially defined static and dynamic features extracted by a wavelet packet transform (WPT) from the resultant force converted from thrust and torque together with the cutting conditions (workpiece material, spindle speed, drill diameter, feed rate) are used as inputs to train the network to obtain a better output, drill corner wear. Drilling experiments have been carried out over a wide range and, features newly defined and conventional ones, features extracted from different frequency bands are compared.     

Characterization of plasma membrane H+-ATPase from salt-tolerant yeast Candida versatilis

Plasma membrane was isolated from the salt-tolerant yeast Candida versatilis and the ATPase in plasma membrane was characterized. The ATPase was a typical H⁺-ATPase with similar properties to the Saccharomyces cerevisiae and Zygosaccharomyces rouxii enzymes. It was reacted with antibody (IgG) raised against S. cerevisiae plasma membrane H⁺-ATPase. The ATPase activity was not changed by adding NaCl and KCl to the assay solutions, but was increased by NH, especially by ammonium sulfate. In vivo stimulation of ATPase activity was observed by the addition of NaCl into the culture medium, as observed in Z. rouxii. No in vivo activation of H⁺-ATPase by glucose metabolism was observed in C. versatilis cells and the activity was independent of the growth phase, like Z. rouxii and unlike S. cerevisiae cells.     

Automated single nucleotide polymorphism typing using bead array in capillary tube

A low-cost and simple on-site technique for genotyping single nucleotide polymorphisms (SNPs) was developed. The technique is based on allele-specific primer PCR and the recently developed bead arrays in a single tip technique. The performance of the method was verified by genotyping four SNPs that correlate with cardiovascular diseases.     

Bulk heterojunction organic solar cells utilizing 1,4,8,11,15,18,22,25-octahexylphthalocyanine

Bulk heterojunction solar cells utilizing soluble phthalocyanine derivative, 1,4,8,11,15,18,22,25-octahexylphthalocyanine (C6PcH₂) have been investigated. The active layer was fabricated by spin-coating the mixed solution of C6PcH₂ and 1-(3-methoxy-carbonyl)-propyl-1-1-phenyl-(6,6)C61 (PCBM). The photovoltaic properties of the solar cell with bulk heterojunction of C6PcH₂ and PCBM demonstrated the strong dependence of active layer thickness, and the optimized active layer thickness was clarified to be 120 nm. By inserting MoO₃ hole transport buffer layer between the positive electrode and active layer, the FF and energy conversion efficiency were improved to be 0.50 and 3.2%, respectively. The tandem organic thin-film solar cell has also been studied by utilizing active layer materials of C6PcH₂ and poly(3-hexylthiophene) and the interlayer of LiF/Al/MoO₃ structure, and a high V_oc of 1.27 V has been achieved.     

Electronic structures and mechanical properties of boron and boron-rich crystals (Part 2)

The second part of this review treats the phase diagram of boron, because of the importance of the material research. A comparison of the phase stabilities of related crystals has been made and deducing general trends among them has been attempted, from which the reader could get useful insights for future development of superhard materials. The mechanical properties of boron and boron-rich crystals are then discussed as the basis of superhard materials. This area is the primary source, from which many controversies arose regarding the strong intericosahedral bonding. Through working on many examples for deformation, consistent interpretations are given.     

Colorectal Laterally Spreading Tumors by Computed Tomographic Colonography

To date, few reports focused primarily on detecting colorectal laterally spreading tumors (LSTs) have been published. The aim of this study was to determine the visibility of LSTs on computed tomographic colonography (CTC) compared with that on colonoscopy as a standard. We retrospectively reviewed and matched data on endoscopic and CTC reports in 157 patients (161 LSTs) who received a multidetector CT scan using contrast media immediately after total colonoscopy at the National Cancer Center Hospital in Tokyo, Japan, between December 2005 and August 2010. The results of the total colonoscopy were known at the time of the CTC procedure and reading. Of the 161 LSTs detected on colonoscopy, 138 were observed and matched by CTC (86%). Of the 91 granular type LSTs (LST-Gs), 88 (97%) were observed and matched, while of the 70 non-granular type LSTs (LST-NGs), 50 (71%) were observed and matched by CTC (p < 0.0001). CTC enabled observation of 73% (22/30) of 20–29 mm, 83% (35/42) of 30–39 mm, 88% (49/56) of 40–59 mm, and 97% (32/33) of ≥60 mm tumors. The rate of observed LSTs by CTC was 86% (97% of LST-G, 71% of LST-NG) of the LSTs found during total colonoscopy.     

Fabrication and electrical properties of SrTiO3/diamond junctions

Strontium titanate (STO) films were directly deposited on Ib (100) single crystal diamond by r.f. magnetron sputtering. The as-deposited STO film was in amorphous state. On the other hand, the crystalline STO film was obtained under the optimized condition of a deposition temperature of 250 °C and a post-annealing temperature of 650 °C. STO/diamond junctions were fabricated on boron-doped homoepitaxial layers grown on p⁺-type single crystal diamond substrates. Electrical properties of the STO/diamond junction were investigated by changing the surface terminations of diamond with hydrogen or oxygen and the crystallinity of the STO film. It was found that the amorphous STO acted like a semi-insulator on H-diamond surface and that the amorphous STO/O-diamond junction behaved like a Schottky diode. The crystalline STO/O-diamond showed a complex rectifying behavior. The crystalline STO film possessed a higher dielectric constant as compared to that of the amorphous one.