Nanoscale ferroelectric information storage based on scanning nonlinear dielectric microscopy

An investigation of ultrahigh-density ferroelectric data storage based on scanning nonlinear dielectric microscopy (SNDM) is described. For the purpose of obtaining fundamental knowledge on high-density ferroelectric data storage, several experiments on nanodomain formation in a lithium tantalate (LiTaO3) single crystal were conducted. Through domain engineering, a domain dot array with an areal density of 1.5 Tbit/inch2 was formed on congruent LiTaO3 (CLT). Sub-nanosecond (500 psec) domain switching speed also has been achieved. Next, actual information storage is demonstrated at a density of 1 Tbit/inch2. Finally, it is described that application of a very small dc offset voltage is very effective in accelerating the domain switching speed and in stabilizing the reversed nano-domain dots. Applying this offset application technique, we formed a smallest artificial nano-domain single dot of 5.1 nm in diameter and artificial nano-domain dot-array with a memory density of 10.1 Tbit/inch2 and a bit spacing of 8.0 nm, representing the highest memory density for rewritable data storage reported to date.     

Introduction feasibility of DHC with CGS in commercial and residential sectors viewed from energy saving effect in whole energy system in japan

District Heating and Cooling (DHC) combined with a Cogeneration System (CGS) is one of the most efficient ways to supply energy to the commercial and residential sectors. This paper discusses the feasibility of introducting DHC from the viewpoint of the overall energy saving effect in Japan's energy system as a whole. Although DHC is efficient for congested areas such as urban business centers, these areas are limited in capacity and number. In our evaluation of the feasibility of introducing DHC, we consider the energy demand density profiles of Japan's commercial and residential sectors in order to determine the installed DHC capacity that is optimal for meeting the growth of energy demand. This paper also discusses operating patterns of CGS and of boilers in DHC. In order to improve the efficiency of individual DHC facilities, CGS should be operated so as to satisfy heating demand, resulting in a low annual load factor. On the other hand, the overall efficiency of the energy system requires an improvement of the overall load factor of CGS, which is achievable by combined use of CGS and boilers. Operation of CGS in this manner improves the feasibility of the introduction of DHC. © 2000 Scripta Technica, Electr Eng Jpn, 133(2): 31–42, 2000     

Economic evaluation of independent power producers viewed from total generating costs of electric power systems

In Japan, electric power utilities purchase electricity from independent power producers (IPPs) through competitive bidding; the IPP evaluation is based on the avoided costs of corresponding generators of utilities. In this evaluation, however, nonpricing factors such as power flow constraints in the electric power system cannot be considered. In this paper, we propose a new approach to evaluate economic impacts of IPPs, the IPP electricity being priced on the basis of total generating costs of the electric power utilities. Such a price to purchase the electricity of IPPs is referred to as the “break‐even cost.” The main results are summarized as follows: 1) Break‐even cost depends on not only the power flow constraints in the system, but also various IPP factors such as generating pattern, location, and capacity, 2) Break‐even cost for the base‐type IPP is higher than the avoided cost of corresponding utility generators, because IPPs located on demand sides can reduce the transmission power loss in the electric power system, 3) Break‐even cost is affected by available capacity of utility generators, especially for the peak‐type IPP generating only during peak demand periods. © 2000 Scripta Technica, Electr Eng Jpn, 133(2): 20–30, 2000     

Numerical simulation model for predicting air quality along urban main roads: First report,development of atmospheric diffusion model

A simulation model for predicting air quality along urban main roads is being studied. The objective of the model is to predict the effects on air quality of various road-related parameters such as configurations of roads and surrounding buildings as well as traffic flow, chemical reactions, and other related phenomena. In this paper, the development of an atmospheric diffusion model, which will be the platform of the whole simulation model, is reported. A new concentration diffusion coefficient model is proposed, in which the effect of vehicle wind is taken into account. By comparing with field experiments in which the diffusing tracer gas concentration was measured in a real street canyon, the validity of the simulation model is verified. Also, the new diffusion coefficient model is found to be capable of improving predictive accuracy of air quality around a street canyon. © 1998 Scripta Technica, Heat Trans Jpn Res, 27(7): 483–496, 1998     

Oxidation of doped europium in BaMgAl10O17 by annealing studied by x‐ray‐absorption fine‐structure measurements

Abstract— We studied the influence of annealing in air on doped europium in BaMgAl₁₀O₁₇ by performing x‐ray absorption fine‐structure measurements. We determined the oxidation of doped divalent europium by annealing in air at over 500°C. The interatomic distance between the europium and the surrounding oxygen atoms was compressed by oxidation. It also appears that the oxidation process of europium is determined by the diffusion of oxygen into BaMgAl₁₀O₁₇.     

Stability of fine water droplet clouds

The rate of evaporation of monodisperse water droplets was first evaluated by solving numerically the modified Maxwell equation, assuming the cellular model for a droplet clouds. The results are discussed in comparison with those for a single isolated droplet, which can be obtained analytically. The critical conditions for the droplet cloud to be stable are then evaluated as a function of droplet number concentration, droplet size and initial conditions of the surrounding air. Secondly, the equilibrated system, where a water droplet cloud is steadily mixed with unsaturated air, was analysed on the basis of enthalpy and material balance of the system to evaluate the total volume change of the droplets. Some of these analyses were verified by experiment, using an ultramicroscopic technique which is useful for droplet size analysis.     

In utero exposure to a low concentration of diesel exhaust affects spontaneous locomotor activity and monoaminergic system in male mice

Background

Epidemiological studies suggest that inhalation of carbonaceous particulate matter from biomass combustion increases susceptibility to bacterial pneumonia. In vitro studies report that phagocytosis of carbon black by alveolar macrophages (AM) impairs killing of Streptococcus pneumoniae. We have previously reported high levels of black carbon in AM from biomass smoke-exposed children and adults. We therefore aimed to use a mouse model to test the hypothesis that high levels of carbon loading of AM in vivo increases susceptibility to pneumococcal pneumonia.

Methods

Female outbred mice were treated with either intranasal phosphate buffered saline (PBS) or ultrafine carbon black (UF-CB in PBS; 500 μg on day 1 and day 4), and then infected with S. pneumoniae strain D39 on day 5. Survival was assessed over 72 h. The effect of UF-CB on AM carbon loading, airway inflammation, and a urinary marker of pulmonary oxidative stress was assessed in uninfected animals.

Results

Instillation of UF-CB in mice resulted a pattern of AM carbon loading similar to that of biomass-smoke exposed humans. In uninfected animals, UF-CB treated animals had increased urinary 8-oxodG (P = 0.055), and an increased airway neutrophil differential count (P < 0.01). All PBS-treated mice died within 72 h after infection with S. pneumoniae, whereas morbidity and mortality after infection was reduced in UF-CB treated animals (median survival 48 h vs. 30 h, P < 0.001). At 24 hr post-infection, UF-CB treated mice had lower lung and the blood S. pneumoniae colony forming unit counts, and lower airway levels of keratinocyte-derived chemokine/growth-related oncogene (KC/GRO), and interferon gamma.

Conclusion

Acute high level loading of AM with ultrafine carbon black particles per se does not increase the susceptibility of mice to pneumococcal infection in vivo.     

Thermal Expansion Behavior of the Si3N4-Whisker-Reinforced Soda-Borosilicate Glass Matrix Composite

Thermal expansion behaviors of a Si₃N₄-whisker-reinforced sodaborosilicate glass matrix composite are studied. An abrupt increase of the coefficient of thermal expansion is observed and is attributed to formation of crystobalite in the sodaborosilicate glass matrix. This thermal expansion behavior is discussed with special reference to the phase transformation of the crystobalite.     

Mechanism of photoconductivity gain and persistent photoconductivity for diamond photodetector

Photoconductivity gain (PG) and persistent photoconductivity (PPC) properties observed in diamond photodetector are theoretically explained by solving rate equations which describe capture and emission processes of photo-generated hole and electron through a boron acceptor and a hole trap in a diamond epilayer and a nitrogen donor in a diamond substrate. Formation of one-sided pn-junction between the epilayer and substrate and slow hole capture rate of acceptor and hole trap levels provide accumulation of photo-generated hole in the epilayer, which produces the PG larger than the ideal responsivity. The PPC current after turning off the deep ultraviolet light is interpreted as due to the slow hole capture rate of the acceptor and trap levels.