Picoliter volume glass tube array fabricated by Si electrochemical etching process

Fabrication process for picoliter volume SiO₂ glass tube array partially embedded in Si wafer was developed. As a template for the glass tubes, macropore array was formed at the surface of n-Si(1 0 0) wafer by photo-assisted electrochemical etching process. The area-selective formation of the array was achieved by applying Au/Cr micropatterns formed at the back-side surface of the substrate as the shade mask, which controls the illumination condition to optimize the etching reaction conditions. Subsequently, surface of the macropores was wet-thermally oxidized to form glass layer, and the bulk Si region was removed by alkaline etching, remaining the “glass tubes”. As a result of complete removal of the bulk Si, released glass tubes were obtained. By partial removal of the bulk Si part, the glass tubes were exposed, fixed in the remaining Si substrate in the form of well-ordered array. It was confirmed that the depth, the exposed region and the wall thickness of each glass tube were controllable by adjusting the parameters such as the duration of the Si electrochemical etching, the alkaline etching and the wet-thermal oxidation, respectively. In order to demonstrate microreaction in the glass tube, aqueous rhodamine B solution was injected into the tubes and excitation light was irradiated to them. As a result, the fluorescence of rhodamine B was clearly detected, confirming the applicability of the glass tubes for various kinds of devices and systems such as microreactors.     

Feasibility of high performance in p-type Ge1−xBixTe materials for thermoelectric modules

GeTe is a promising candidate for the fabrication of high-temperature segments for p-type thermoelectric (TE) legs. The main restriction for the widespread use of this material in TE devices is high carrier concentration (up to ∼ 10²¹ cm⁻³), which causes the low Seebeck coefficient and high electronic component of thermal conductivity. In this work, the band structure diagram and phase equilibria data have been effectively used to attune the carrier concentration and to obtain the high TE performance. The Ge_1−xBi_xTe (x = 0.04) material prepared by the Spark plasma sintering (SPS) technique demonstrates a high power factor accompanied by moderate thermal conductivity. As a result, a significantly higher dimensionless TE figure of merit ZT = 2.0 has been obtained at ∼ 800 K. Moreover, we are the first to propose that application of the developed Ge_1−xBi_xTe (x = 0.04) material in the TE unicouple should be accompanied by SnTe and CoGe₂ transition layers. Only such a unique solution for the TE unicouple makes it possible to prevent the negative effects of high contact resistance and chemical diffusion between the segments at high temperatures.     

Detection of light-absorbing iron oxide particles using a modified single-particle soot photometer

Copyright © 2016 American Association for Aerosol Research     

Morphology‐dependent electrocatalytic activity of nanostructured Pt/C particles from hybrid aerosol–colloid process

An optimum nanostructure and pore size of catalyst supports is very important in achieving high catalytic performances. In this instance, we evaluated the effects of various carbon nanostructures on the catalytic performances of carbon‐supported platinum (Pt/C) electrocatalysts experimentally and numerically. The Pt/C catalysts were prepared using a hybrid method involving the preparation of dense, hollow, and porous nanostructured carbon particle via aerosol spray pyrolysis followed by microwave‐assisted Pt deposition. Electrochemical characterization of the catalysts showed that the porous Pt/C catalyst gave the best performance; its electrochemical surface area was much higher, more than twice than those of hollow or dense Pt/C. The effects of pore size on electrocatalysis were also studied. The results showed the importance of a balance between mesopores and macropores for effective catalysis with a high charge transfer rate. A fluid flow model showed that good oxygen transport contributed to the catalytic activity. © 2015 American Institute of Chemical Engineers AIChE J, 62: 440–450, 2016     

Fabrication of Translucent Magnesium Aluminum Spinel Ceramics

A precursor for magnesium aluminum spinel powder, composed of crystalline ammonium dawsonite hydrate (NH₄Al(OH)₂CO₃·H₂O) and hydrotalcite (Mg₆Al₂(CO₃)(OH)₁₆·4H₂O) phases, was synthesized via precipitation, using ammonium bicarbonate as the precipitant. The precursor was characterized by differential thermal analysis/thermogravimetry, X-ray diffractometry, and scanning electron microscopy. Reactive spinel powder, which could be densified to translucency under vacuum at 1750°C in 2 h without additives, was obtained by calcining the precursor at 1100°C for 2 h.     

Imaging Secondary-Ion Mass Spectroscopy Observation of the Scavenging of Siliceous Film from 8-mol%-Yttria-Stabilized Zirconia by the Addition of Alumina

The scavenging of a resistive siliceous phase via the addition of Al₂O₃ was studied, using imaging secondary-ion mass spectroscopy (SIMS), given the improved grain-boundary conductivity in 8-mol%-yttria-stabilized zirconia (8YSZ). The grain-boundary resistivity in 8YSZ decreased noticeably with the addition of 1 mol% of Al₂O₃. Strong SiO₂ segregation at the grain boundaries was observed in a SIMS map of pure 8YSZ that contained 120 ppm of SiO₂ (by weight). The addition of 1 mol% of Al₂O₃ caused the SiO₂ to gather around the Al₂O₃ particles. The present observations provided direct and visual evidence of SiO₂ segregation at the grain boundaries (which had a deleterious effect on grain-boundary conductivity) and the scavenging of SiO₂ via Al₂O₃ addition.     

Pheromonal and kairomonal activities can be separated: synthesis and bioactivity studies of pine bast scale sex pheromones and their analogues

New syntheses were achieved to secure matsuone (1), the pheromone of the pine scale Matsucoccus matsumurae, that of M. feytaudi (2), and that of M. josephi (3). Five analogues (4-8) of 1, 2, and 3 were synthesized and their bioactivities studied. The pheromone analogue 7 showed relatively strong pheromonal activity toward M. josephi, while it was inactive as a kairomone toward the predator Elatophilus hebraicus. Similarly, analogue 8 acted as a pheromone for M. feytaudi, but it did not attract any of its local predators. The M. feytaudi pheromone 2 exhibited strong kairomonal activity toward E. hebraicus, but was not active as a pheromone mimic to attract M. josephi.     

Dynamic in situ observation of automotive catalysts for emission control using X-ray absorption fine structure

Two main pivotal subjects of research in automotive catalysts were studied by modern X-ray absorption analysis techniques. One is oxygen storage/release behaviour, and the other is sintering inhibition of Pt particles. First, three types of CeO₂–ZrO₂ (Ce:Zr = 1:1 molar ratio) compounds with different oxygen storage/release capacities and different structural properties were prepared, and the valence change of Ce as a function of temperature during oxygen release/storage processes was investigated. The reduction of surface Ce mainly occurred in the range 100–170 °C, and the reduction of bulk Ce progressed at high temperatures of 170 °C and above. The Ce reduction behaviour depended not only on the homogeneity of the Ce and Zr for bulk reduction at high temperatures but also on the particle size of the CeO₂–ZrO₂ samples for surface reduction at low temperatures. Secondly, sintering inhibition of Pt in Pt/Al₂O₃, Pt/MgO and Pt/ceria-based catalysts after 800 °C ageing in air was studied. We found that the Pt–O–M (M = Mg, Ce) bond acted as an anchor and inhibited the sintering of Pt particles on MgO or ceria-based oxide. Especially, it was noteworthy that the Pt–O–Ce⁴⁺ bond on the ceria-based support breaks easily through the reduction of Ce (Ce⁴⁺ → Ce³⁺) during the usual stoichiometric and reducing conditions.     

Catalytic dehydration of 1,2-propanediol into propanal

Vapor-phase catalytic dehydration of 1,2-propanediol was investigated over several catalysts, such as acidic oxides and supported heteropoly acids. These acids catalyze the dehydration of 1,2-propanediol to produce propanal. In particular, silica-supported silicotungstic acid showed the highest catalytic activity in the formation of propanal. At low conversions, however, propanal reacted with another 1,2-propanediol to produce a cyclic acetal (2-ethyl-4-methyl-1,3-dioxolane). Such acetal formation reduced the selectivity to propanal. Under optimum reaction conditions, 100% conversion was attained with propanal selectivity higher than 93 mol% at 200 °C.     

Ruthenium(IV) dioxide-catalyzed reductive gasification of intractable biomass including cellulose, heterocyclic compounds, and sludge in supercritical water

Catalytic reduction gasification in the presence of ruthenium(IV) dioxide (RuO₂) in supercritical water was used to decompose intractable biomass. The gasification of model biomass samples (glucose, cellulose, and heterocyclic compounds), and low-purity biomass samples obtained from a paper-recycling facility (paper sludge) and from a sewage treatment plant (sewage sludge) were studied. In clear contrast to another catalysts, the RuO₂ catalyst completely gasified cellulose to produce mainly hydrogen, methane, and carbon dioxide under various conditions (e.g., 673 K at 30 MPa and 773 K at 50 MPa). As for heterocyclic compounds, nitrogen compounds did not deactivate the RuO₂ catalyst; the gasification of carbazole proceeded completely. Furthermore, paper sludge was almost completely decomposed in supercritical water with RuO₂ at 723 K.