Tribological Behaviors of 52100 Steel in Carbon Dioxide Atmosphere

The tribological behavior of 52100 steel in a carbon dioxide (CO₂) atmosphere was investigated using a reciprocating ball-on-disk tribometer. X-ray photoelectron spectroscopy (XPS) was used to identify the adsorbed surface layers and tribochemical products. We found that CO₂can substantially reduce friction and wear of the steel. Adsorbed and reacted surface layers containing iron carbonate and/or bicarbonate play an important role in reducing friction. A disk, exposed once to CO₂atmosphere, also shows a low friction for a long time even in a vacuum environment. An optimum CO₂pressure exists for effectively reducing friction and wear. A low-pressure CO₂atmosphere is insufficient to produce iron carbonate. In contrast, high pressure engenders serious chemical wear.     

Acetophenone as an Anti-attractant for the Western Pine Beetle, <Emphasis Type="Italic">Dendroctonus Brevicomis</Emphasis> LeConte (Coleoptera: Scolytidae)

Host location and colonization by bark beetles is dependent upon the relative and absolute amounts of attractant and antiattractant compounds available. Many investigations have lead to use of antiattractants for the management of these pests and have been especially focused on verbenone. However, recent studies have identified new antiattractants for several species of bark beetles. We report results of recent investigations of the response of western pine beetle, Dendroctonus brevicomis LeConte, to two recently identified antiattractants, acetophenone, and fenchyl alcohol, with verbenone as a standard of comparison, in northern California. Release of both acetophenone and verbenone resulted in significantly lower trap catches of D. brevicomis in aggregation pheromone-baited traps, while fenchyl alcohol was inactive. Acetophenone was the only antiattractant that did not reduce numbers of the most abundant predator of D. brevicomis, Temnochila chlorodia (Mannerheim), responding to the attractant pheromone of its prey. Aggregation pheromone-baited traps with acetophenone also had the highest predator/prey ratio. Our results suggest that acetophenone may be part of the intra- and interspecific interactions among sympatric species of bark beetles and may have application in their control.     

Effects of 6-anilino-1,3,5-triazine-2,4-dithiol,zinc stearate,and barium stearate on the thermal stabilization of PVC

Individual action and synergistic effect in the combination of 6-anilino-1,3,5-triazine-2,4-dithiol (AF), zinc stearate, and barium stearate on the color stabilization of PVC were investigated. In this system, AF selectively reacts with allylic chlorine atoms in PVC. Consequently, unstable allylic chlorine units were converted to thermally stable allylic structures, thus retarding the development of polyene sequences. Zinc stearate accelerated the reaction of AF with allylic chlorine atoms in PVC, forming the zinc salts of AF (AFZ_nSt, St?C₁–H₃₅COO? ) by reacting with AF. Barium stearate reacted with ZnCl₂ which is formed in the above reaction to give St₂Zn and BaCl₂. Consequently, barium stearate led to the selective reaction of AF with allylic chlorine atoms in PVC and the remarkable retarding effect of discoloration of PVC.     

Adsorption isotherms of pigments from alkali-refined vegetable oils with clay minerals

Adsorption isotherms of pigments from alkali-refined oils (rapeseed, soybean, wheatgerm, safflower, corn, cottonseed and sunflower) were measured to investigate the applicability of the Langmuir and Freundlich equations and to elucidate the adsorption characteristics of pigments on sepiolites and standard activated clay. The Freundlich equation was more applicable to the experimental adsorption isotherms. The equilibrium amount adsorbed, acidity, pore size distribution and inflection of the Freundlich isotherms could be explained by assuming that pigments were adsorbed on the stronger acid sites in smaller pores at low concentration, and then in the larger ones when the concentration increased. The amount adsorbed increased with a rise in adsorption temperatures from 70 to 110°C, and the heat of adsorption was below 10 kcal/mol. The results indicate that pigments were physically adsorbed on the acid sites activated at higher adsorption temperatures.     

Effect of Grain Boundaries on Thermal Conductivity of Silicon Carbide Ceramic at 5 to 1300 K

The thermal conductivity of a SiC ceramic was measured as 270 W·m⁻¹·K⁻¹ at room temperature. At low temperatures ( T < 25 K), the decrease in the conductivity was proportional to T ³ on a logarithmic scale, which indicated that the conductivity was controlled by boundaries. The calculated phonon mean free path in the ceramic increased with decreased temperature, but was limited to ∼4 μm, a length almost equal to the grain size, at temperatures below 30 K. We concluded that the thermal conductivity of the ceramic below 30 K was influenced significantly by grain boundaries and grain junctions.     

EFFECT OF INTERMITTENT HEATING ON DRYING-INDUCED STRAIN-STRESS OF MOLDED CLAY

ABSTRACT

Parametric analyses of the strain-stress in the drying process are performed to study the influence of the intermittent drying on the behaviors of drying-induced strain-stress and deformation as well as the drying characteristic. The transient three-dimensional problem of strain-stress and heat and moisture transfer in a slab is solved simultaneously by the finite element method. The dimensionless parameters are introduced to generalize the problem in the conservation equations of heat and moisture transfer. The intermittent drying is modeled by applying periodically smaller and larger Biot numbers to the boundary conditions. The maximum tensile and compressive stresses fluctuate, and fall remarkably during the smaller Biot number period when a slab is heated intermittently. The peak stress of the fluctuation exceeds beyond the case in the continuous healing where the overall drying rate is almost equivalent to that in the intermittent beating, but the reduction of the stresses takes place rapidly in the low heating period.     

Photocatalytic effects of plasma-heated TiO2−x particles under visible light irradiation

The photocatalytic characteristics of partially reduced TiO₂ (TiO_2?x ) by plasma treatment and plasma-heated treatment were investigated in the visible-light region. For the visible-light photocatalytic activity of TiO_2?x , plasmaheated treatment shows stronger than plasma treatment significantly. The TiO_2?x by plasma-heated treatment shows broader red-shifted absorption bands than one by plasma treatment in the visible-light region. The surface color of TiO_2?x by plasma treatment and plasma-heated treatment changed from white to sky blue, and to navy, respectively. After exposure to air, the surface color of TiO_2?x changed from sky blue to white for plasma treatment and from navy to beige for plasma-heated treatment.     

Fabrication of Transparent, Sintered Sc2O3 Ceramics

We report here the fabrication of transparent Sc₂O₃ ceramics via vacuum sintering. The starting Sc₂O₃ powders are pyrolyzed from a basic sulfate precursor (Sc(OH)_2.6(SO₄)_0.2·H₂O) precipitated from scandium sulfate solution with hexamethylenetetramine as the precipitant. Thermal decomposition behavior of the precursor is studied via differential thermal analysis/thermogravimetry, Fourier transform infrared spectroscopy, X-ray diffractometry, and elemental analysis. Sinterability of the Sc₂O₃ powders is studied via dilatometry. Microstructure evolution of the ceramic during sintering is investigated via field emission scanning electron microscopy. The best calcination temperature for the precursor is 1100°C, at which the resultant Sc₂O₃ powder is ultrafine (∼85 nm), well dispersed, and almost free from residual sulfur contamination. With this reactive powder, transparent Sc₂O₃ ceramics having an average grain size of ∼9 μm and showing a visible wavelength transmittance of ∼60–62% (∼76% of that of Sc₂O₃ single crystal) have been fabricated via vacuum sintering at a relatively low temperature of 1700°C for 4 h.