Lewis Acid‐Catalyzed or Base‐Promoted Regioselective Cycloisomerization of N‐Imidoyl‐o‐alkynylanilines for Synthesis of N‐Imidoyl‐(1 H)‐indoles and 4‐Alkylidene‐3,4‐dihydroquinazolines

Product selectivity control for the synthesis of imidoylindoles and 4‐alkylidenedihydroquinazolines from N‐imidoyl‐o‐alkynylanilines via silver triflate‐catalyzed cycloisomerization or tetrabutylammonium fluoride‐promoted cyclization is described. The product selectivity depends mainly on the catalyst/promoter used, and on the substituents on the alkyne and amidine functions of the substrates.

     

Capability of Utilizing CYP3A5 Polymorphisms to Predict Therapeutic Dosage of Tacrolimus at Early Stage Post-Renal Transplantation

While CYP3A5 polymorphisms are used to predict the initial dosage of tacrolimus therapy, the predictive capability of genetic information for dosing at early stage post-renal transplantation is unknown. We investigated the influence of polymorphisms over time. An initial oral dose of modified-release once-daily tacrolimus formulation (0.20 mg/kg) was administered to 50 Japanese renal transplant patients every 24 h. Stepwise multiple linear regression analysis for tacrolimus dosing was performed each week to determine the effect of patient clinical characteristics. The dose-adjusted trough concentration was approximately 70% higher for patients with the CYP3A5*3/*3 than patients with the CYP3A5*1 allele before the second pre-transplantation tacrolimus dose (0.97 (0.78–1.17) vs. 0.59 (0.45–0.87) ng/mL/mg; p < 0.001). The contribution of genetic factors (CYP3A5*1 or *3) for tacrolimus dosing showed increased variation from Day 14 to Day 28 after transplantation: 7.2%, 18.4% and 19.5% on Days 14, 21 and 28, respectively. The influence of CYP3A5 polymorphisms on the tacrolimus maintenance dosage became evident after Day 14 post-transplantation, although the tacrolimus dosage was determined based only on patient body weight for the first three days after surgery. Tacrolimus dosage starting with the initial administration should be individualized using the CYP3A5 genotype information.     

Morphological evolution and mechanical property enhancement of natural rubber/polypropylene blend through compatibilization by nanoclay

Nanocomposites of natural rubber (NR)/polypropylene (PP) (80/20 wt %) blends filled with 5 phr pristine clay were prepared by melt‐mixing process. Effects of clay incorporation technique via conventional melt‐mixing (CV) and masterbatch mixing (MB) methods on nanostructure and properties of the blend nanocomposites were investigated. The XRD, SAXS, WAXD, and TEM results showed that the clays in the NR/PP blend nanocomposites were presented in different states of dispersion and were locally existed at the interface between NR and PP as well as dispersed in the NR matrix. The presence of clay caused unique morphological evolution such as fine fibrillar PP domains. The tensile strength was improved over the unfilled NR/PP blends by 53% and 224%, and the storage modulus at 25 °C was increased by 78% and 120% for the NR/PP/clay nanocomposites prepared by CV and MB methods, respectively. Significant improvement in both properties was particularly obtained from the MB method due to finer dispersion fibrillar PP phase in the NR matrix and stronger interfacial adhesion between NR and PP fibers, as suggested from DMA. The oil resistance of blend nanocomposites was also improved over that of the unfilled NR/PP blend, and this property was further progressed by the masterbatch mixing method. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44574.     

Rolling Motion of a Ball on Pressure Sensitive Adhesives

Rolling motion of a ball on pressure sensitive adhesives was carefully observed under well-controlled conditions. Rolling distance was measured as a function of time by means of stroboscopic photography, and rollout distance was measured as a function of initial height of a ball. Both rolling distances and rollout distances were analysed according to a unified theory, where rolling friction coefficient (f) of a pressure sensitive adhesive is involved. It is suggested that f depends on viscoelastic properties of the adhesives.     

Estimation of the Surface Energy of Polymer Solids

The methods to estimate the surface tension of polymer solids using contact angles have been reviewed in the first part. They are classified into the following three groups depending on the theories or the equations applied: (1) the methods using the Young's equation alone, (2) the methods using the combined equation of Young and Good-Girifalco, and (3) the methods using the equations of work of adhesion. Some notes and comments are given for each method and results are compared with each other. The two-liquids method for rather high energy surface is also introduced.

Next, some new possibilities to evaluate the surface tension of polymer solids are presented by our new contact angle theory in consideration of the friction between a liquid drop and a solid surface. The advancing and receding angles of contact (θ _a and θ _r ) are explained by the frictional tension γ_F and accordingly two kinds of the critical surface tension γ_C (γ_Ca and γ_Cr ) are given.

This work has shown that one of the recommendable ways to evaluate γ_S is either the maximum γ_LV cos θ_a or the maximum γ_C using the advancing contact angle θ_a alone, and another way is the arithmetic or the harmonic mean of the γ_Ca and γ_Cr . A depiction to determine the γ_C such as ln(1 + cos θ₀ ) vs. γ_LV with cos θ₀ = (cos θ₀ + cos θ_r )/2 has also been proposed.     

Core-Shell Type Polymer Microspheres Prepared from Diblock Copolymer Films

In the first part of this article, the preparation method for core-shell type polymer microspheres from diblock copolymer films is reviewed. The core-shell type polymer microspheres were obtained from the crosslinking reaction in spherical microdomains formed by diblock copolymer film. In the second section, the solution and solid properties of core-shell type microspheres are reviewed. The micelle of core-shell type microsphere moved like pseudolatex. Its solubility depended strongly on that of shell segments. Finally, the miscibility behaviors of binary core-shell type microsphere blends are reported briefly.     

Adhesion between side surface of an elastic beam and flat surface of a rigid body

A theory of adhesion between an elastic beam and a rigid body is proposed using linear beam theory. Normalized force between the elastic beam and the rigid body considering adhesion of the side surface of the elastic beam is investigated theoretically. Adhesion of an elastic beam is important to analyze gecko adhesion, and peeling mechanism of an adhered film. This adhesion is also important in design of grip-and-release devices. The force between an elastic beam and a rigid body is investigated by considering shear force and total energy, and is obtained as a function of the displacement of the elastic beam. The proposed theory is different from Kendall’s thin-film peeling theory in terms of the elastic energy. The proposed theory considers bending elastic energy, whereas Kendall’s theory considers extension elastic energy. Two different contacts, line contact and area contact, are taken into account to discuss the loading and unloading processes in terms of the relation between the force and the displacement. Non-dimensional parameter, which relates to the work of adhesion and the specifications of the elastic beam, is introduced to explain the normalized maximum tensile force.     

Synthesis and characterization of CeO2 nano-rods

We report a synthesis of two types of CeO₂ nano-rods via the facile and efficient hydrothermal process free from any surfactant and template. The synthesized nano-rods are chemically identified as CeO₂ with the standard fluorite structure but their morphologies are different. The nano-rods prepared with cerium nitrate hexahydrate and sodium phosphate are thicker and shorter with diameter of ∼30 nm and length of ∼100 nm, and those prepared with cerium acetate hydrate and dibasic sodium phosphate are thinner and longer with ∼10 nm in diameter and ∼400 nm in length. Microstructural analyses reveal that the two species of nano-rods have low-energy {111} surfaces and grow along the 〈112〉 direction. As a consequence of their morphologies, the two types of synthesized nano-rods exhibit excellent UV-absorption ability in comparison to the irregular CeO₂ nanoparticles.     

Preparation and properties of transparent cellulose hydrogels

Highly transparent cellulose hydrogels with physical crosslinkage were prepared from nonaqueous organic cellulose solutions and viscose by coagulating and regenerating cellulose in an aqueous solution containing a water‐miscible organic solvent. Nonaqueous organic cellulose solutions used were LiCl/dimethylacetamide, paraformaldehyde/dimethyl sulfoxide, and triethylammonium chloride/dimethyl sulfoxide. Preparation conditions and physical properties of the transparent cellulose hydrogels were studied. The transparency of the cellulose hydrogels depended on the composition of the aqueous solution containing the organic solvent. Furthermore, transparent cellulose hydrogels from viscose showed high tensile strength. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3020–3025, 2003     

A Preliminary Investigation of the ISG Glass Vapor Hydration

During the geological disposal of high-level waste, the nuclear glass is expected to be first hydrated in water vapor prior to liquid alteration. In the present work, we investigated the vapor hydration of the International simple glass (ISG) at 175°C and different relative humidities (60%, 80% and 98%). The glass hydration was investigated by nuclear reaction analysis (NRA) and Fourier transform infra-red spectroscopy. The chemical and mineralogical compositions of the alteration products were studied using scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM-EDS) and μ-Raman spectroscopy, respectively. The NRA results gave water diffusion coefficients of 2.31–7.34 × 10⁻²¹ m²/s_, in good agreement with the literature data on borosilicate glasses altered in aqueous media. The glass hydration increased with relative humidity percentage and the SEM-EDS analysis showed a slight enrichment in Si and loss of Na in the hydrated glass layer compared with the pristine glass. The hydration rate of the ISG glass was little higher than that of the French SON68 glass hydrated using water vapor. The corrosion products were analcime, tobermorite, and calcite, which were typical of the SON68 glass hydrated in similar conditions.