Application of Ni-free high nitrogen stainless steel for bipolar plates of proton exchange membrane fuel cells

Ni-free 23Cr-1N stainless steel was examined as bipolar plates for proton exchange membrane fuel cells. Corrosion resistance of the 23Cr-1N stainless steel was better relative to 22Cr stainless steel in the simulated cathodic environments. As confirmed by X-ray photoelectron spectroscopy, the polarized 22Cr and 23Cr-1N stainless steels at pH 2.3 presented predominantly chromium oxide in the outer passive layers. At pH 4.3, the passive layer of the polarized 22Cr stainless steel changed to iron oxides dominant. Interestingly, on the other hand, the polarized 23Cr-1N stainless steel preserved chromium oxide rich outer passive layer, which provides good corrosion resistance. As a result, although the initial cell voltage was slightly lower (∼40 mV), the 23Cr-1N stainless steel bipolar plates employing cell showed better cell voltage stability up to 1000 h, compared with the 22Cr stainless steel employing cell. The operation voltage became further higher through a surface modification of the 23Cr-1N stainless steel with TiN nanoparticles. It seems that the corrosion resistive Ni-free 23Cr-1N is possible to apply for bipolar plates of proton exchange membrane fuel cells.     

Developed Modeling and Numerical Simulation for Mismatching Photovoltaic Performance Evaluation

A simplified simulation method was described for charactering mismatching photovoltaic performance integrated with bypass and string diodes, which are configured additionally compared with the tradition design for avoiding deterioration to modules in series or in parallel connection. The Newton-Raphson method was adopted for numerical simulations, with some computation problem discussed for fast convergence. It was proven to be suitable and effective when model validation coinciding with manufacturer specification. Furthermore, maximal power point (MPP) peak positions were reviewed roundly via simulations of the total characteristic curves. Multi-power peaks with multi-diodes installed were also investigated. The proposed method can be benefit for better comprehension on the physical circuit and provides greater program expansibility, and such simulation researches should be applicable for manufacturer to evaluate the configuration of photovoltaic module. © 2009 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Basis Translation Matrix between Two Isomorphic Extension Fields via Optimal Normal Basis

This paper proposes a method for generating a basis translation matrix between isomorphic extension fields. To generate a basis translation matrix, we need the equality correspondence of a basis between the isomorphic extension fields. Consider an extension field F_p^m where p is characteristic. As a brute force method, when p^m is small, we can check the equality correspondence by using the minimal polynomial of a basis element; however, when p^m is large, it becomes too difficult. The proposed methods are based on the fact that Type I and Type II optimal normal bases (ONBs) can be easily identified in each isomorphic extension field. The proposed methods efficiently use Type I and Type II ONBs and can generate a pair of basis translation matrices within 15 ms on Pentium 4 (3.6 GHz) when mlog₂ p = 160.     

A motif detection and classification method for peptide sequences using genetic programming

An exploration of common rules (property motifs) in amino acid sequences has been required for the design of novel sequences and elucidation of the interactions between molecules controlled by the structural or physical environment. In the present study, we developed a new method to search property motifs that are common in peptide sequence data. Our method comprises the following two characteristics: (i) the automatic determination of the position and length of common property motifs by calculating the physicochemical similarity of amino acids, and (ii) the quick and effective exploration of motif candidates that discriminates the positives and negatives by the introduction of genetic programming (GP). Our method was evaluated by two types of model data sets. First, the intentionally buried property motifs were searched in the artificially derived peptide data containing intentionally buried property motifs. As a result, the expected property motifs were correctly extracted by our algorithm. Second, the peptide data that interact with MHC class II molecules were analyzed as one of the models of biologically active peptides with buried motifs in various lengths. Twofold MHC class II binding peptides were identified with the rule using our method, compared to the existing scoring matrix method. In conclusion, our GP based motif searching approach enabled to obtain knowledge of functional aspects of the peptides without any prior knowledge.     

Pleiotropic Effects of Sodium-Glucose Cotransporter-2 Inhibitors: Renoprotective Mechanisms beyond Glycemic Control

Diabetes mellitus is a major cause of chronic kidney disease and end-stage renal disease. However, the management of chronic kidney disease, particularly diabetes, requires vast improvements. Recently, sodium-glucose cotransporter-2 (SGLT2) inhibitors, originally developed for the treatment of diabetes, have been shown to protect against kidney injury via glycemic control, as well as various other mechanisms, including blood pressure and hemodynamic regulation, protection from lipotoxicity, and uric acid control. As such, regulation of these mechanisms is recommended as an effective multidisciplinary approach for the treatment of diabetic patients with kidney disease. Thus, SGLT2 inhibitors are expected to become key drugs for treating diabetic kidney disease. This review summarizes the recent clinical evidence pertaining to SGLT2 inhibitors as well as the mechanisms underlying their renoprotective effects. Hence, the information contained herein will advance the current understanding regarding the pleiotropic effects of SGLT2 inhibitors, while promoting future research in the field.     

Effect of α-Al/Al3Ni microstructure on the corrosion behaviour of Al-5.4 wt% Ni alloy fabricated by equal-channel angular pressing

The effect of microstructure on corrosion behaviour of an Al-5.4 wt% Ni alloy fabricated by equal-channel angular pressing (ECAP) was investigated by means of potentiodynamic polarization test. The Al-5.4 wt% Ni alloy samples were severely deformed by ECAP with two strain introduction methods of route A and route B_C and the ECAP process was repetitively carried out up to 6 passes (strain 6). The anodic polarization measurements indicated that pitting potential of the ECAPed Al-Ni alloy samples in chloride containing neutral buffer solution increased with ECAP passes. The pitting corrosion resistance of Al-Ni alloy after ECAP by route B_C was better than that by route A. It is attributable to that the size of α-Al crystal region was reduced with ECAP passes and route B_C was able to obtain more homogeneous α-Al/Al₃Ni structure than route A. On the other hand, pitting corrosion resistance of pure Al samples showed an obvious declining with increasing ECAP passes. It was indicated that more homogeneous and finer α-Al/Al₃Ni structure obtained by ECAP played a vital role on improving the corrosion resistance of Al-5.4 wt% Ni alloy.     

Double-sensor method for detection of oscillating electric field

An electric-field sensor consisting of thin copper plates is designed to measure an oscillating electric field produced by charge separations on a plasma column. The sensor installed in a vacuum region around plasma detects charges induced by the electric field on the copper plates. The value of the induced charges depends not only on the strength of the electric field, but also on the design of the sensor. To obtain the correct strength of the electric field, a correction factor arising from the design of the sensor must be known. The factor is calculated numerically using Laplace's equation and compared with a value measured using a uniform electric field in the frequency range of 10-500 kHz. When an external circuit is connected to the sensor to measure the induced charges, the electric field around the sensor is disturbed. Therefore, a double-sensor method for excluding a disturbed component in the measured electric field is proposed. The reliability of the double-sensor method is confirmed by measuring dipole-like and quadrupole-like electric fields.