Electrorheological properties and creep behavior of polyindole/poly(vinyl acetate) composite suspensions

In this study, electrorheological (ER) properties of polyindole (PIN) and polyindole/poly (vinyl acetate), (PIN/PVAc) conducting composites having different compositions were investigated. Conductivities and dielectric properties of these composites were determined. The particle sizes of the composites were determined by dynamic light scattering method. Suspensions of PIN and PIN/PVAc composites were prepared in silicone oil, at several concentrations (c = 5–25%, m/m) and their sedimentation stabilities were determined. Then the effects of dispersed particle concentration, shear rate, electric field strength, frequency, and temperature onto ER activities of suspensions were investigated. The flow times of these suspensions at various dc electric field strengths were measured. Further, creep tests were applied to the composite suspensions and a reversible viscoelastic deformation was observed.     

The Effects of Electromagnetic Brake on Liquid Steel Flow in Thin Slab Caster

Computational fluid dynamics (CFD) model with magneto hydro dynamics (MHD) is developed for a thin slab caster to investigate the effects of electromagnetic brake (EMBr) on liquid steel flow in continuous casting mold and to determine the EMBr practices which lead to optimal flow structure. Particle Image Velocimetry (PIV) tests in water model and meniscus flow measurements in real caster are performed to validate the predictions obtained with CFD models. The performance of different submerged entry nozzle designs, SEN 1 and SEN 2, are evaluated. The effects of nozzle submergence in relation to the applied magnetic field on mold flow structure are quantified. There are significant differences between flow structures obtained with SEN 1 and SEN 2, even though both designs have fundamental similarities and contain four ports. EMBr mainly reduces the meniscus velocities for SEN 2 as opposed to the foremost influence of EMBr for SEN 1 that is to significantly slow down the downward jet coming from the bottom ports. In addition, reducing the EMBr strength for shallow nozzle submergence and increasing the EMBr strength for deep nozzle submergence help to maintain similar meniscus activity for all conditions.     

Adaptive educational hypermedia accommodating learning styles: A content analysis of publications from 2000 to 2011

Implementing instructional interventions to accommodate learner differences has received considerable attention. Among these individual difference variables, the empirical evidence regarding the pedagogical value of learning styles has been questioned, but the research on the issue continues. Recent developments in Web-based implementations have led scholars to reconsider the learning style research in adaptive systems. The current study involved a content analysis of recent studies on adaptive educational hypermedia (AEH) which addressed learning styles. After an extensive search on electronic databases, seventy studies were selected and exposed to a document analysis. Study features were classified under several themes such as the research purposes, methodology, features of adaptive interventions and student modeling, and findings. The analysis revealed that the majority of studies proposed a framework or model for adaptivity whereas few studies addressed the effectiveness of learning style-based AEH. Scales were used for learning style identification more than automatic student modeling. One third of the studies provided a framework without empirical evaluation with students. Findings on concrete learning outcomes were not strong enough; however, several studies revealed that suggested models influenced student satisfaction and success. Current trends, potential research gaps and implications were discussed.     

Degradation of 4-chloro-2-methylphenol in aqueous solution by electro-Fenton and photoelectro-Fenton processes

Degradation of 4-chloro-2-methylphenol (PCOC), a refractory toxic chemical emitted to the environment from the industrial production of phenoxy herbicides was studied in aqueous solution. Electro-Fenton and photoelectro-Fenton processes were used as the degradation methods. H₂O₂, produced by the reduction of oxygen at carbon cathode reacted with dissolved metal ions to form hydroxyl radicals, which in turn reacted with PCOC sequentially to degrade the aromatic ring. The effects of using different [Fe²⁺]/[PCOC]₀ and the effect of replacing Fe²⁺ by Mn²⁺ ion have been examined. It was found that degradation rate was increased with increasing [Fe²⁺]/[PCOC]₀ ratio from 2 to 4. However, the total charge utilized during the treatment was also increased. The efficiency of PCOC degradation was observed to be higher when Mn²⁺ was used as the catalyst. The mineralization of aqueous solutions of PCOC, withdrawn from the reactor at certain time interval, has been followed by total organic carbon (TOC) decay and dechlorination. A fast and complete degradation of the aromatic ring was achieved in photoelectro-Fenton system. 41.7% TOC decay and complete dechlorination were observed by consuming only 141.4 C electrical charge during a 300 min photoelectron-Fenton treatment. In the case of electro-Fenton system, 280.7 C electrical charge was consumed during 450 min of electrolysis to attain a similar degradation of PCOC. 14.9% TOC removal and 89.3% dechlorination have been obtained in this system under the applied conditions.     

Evaluation of plate loading tests on some rock formations for assessing the ground bearing capacity

A significant proportion of the cost of winning minerals or aggregates in an open cast mine is related to the mass haul. The quality of the haul roads is an important factor in the efficiency and length of turn-round time. The paper reports a study into the use of plate loadings tests as a quick and easy means of establishing a preliminary bearing capacity. Various relationships have been obtained between bearing capacity and the results of field and laboratory tests. Good performance indices (r, RMSE, VAF) indicate they can be used for an initial assessment of the bearing capacity of rock units ranging from weak to strong. In addition, classes for bearing capacity of rock units have been suggested based on field observations and measurements.     

An estimation method for cover pressure re-establishment distance and pressure distribution in the goaf of longwall coal mines

Measurement of deformations and stresses in the goaf of longwall panels is difficult due to the inaccessibility of the waste area. This paper proposes a method for estimating the distance to return of the cover pressure and the stress distribution in the goaf of flat-lying longwall panels where the caving is bulking controlled. In the development of the method, it has been considered that the final subsidence on the surface is a result of deformation of the caved material and deformation of the strata over the caved zone, i.e. during both the caving and the compaction of the caved material. In this respect, the stress–strain behaviour of the caved rock pile, bending of the lowest uncaved strata depending on seam thickness, and residual expansion of fractured strata vertically over the caved zone have been described by using previous field and laboratory investigations. From the relations established between these parameters and surface subsidence, the re-establishment of cover pressure distance has been characterised with a three-parameter power function in which the independent variables are depth, excavation height, bulking factor and compressive strength of the rock fragments. It has been found that the cover pressure distance increases exponentially by increasing depth, unlike previous findings of investigations in which the cover pressure distance increases as a linear function of depth. On the other hand, the cover pressure distance for a constant depth and mining height increases if the bulking factor of the rock pile increases and/or the strength of rock fragments decreases. When the mining height increases, the bulking factor of the caved rock pile increases, and hence this result with increase in cover pressure distance. An estimation of the stress distribution curve for panels which are wide enough for the development of cover pressure has been expressed with a six-parameter Taylor series polynomial function. The general form of the stress development curves found from the proposed method has been verified with curves obtained through numerical models.     

Adsorption of an anionic dispersant on lignite

Since coal is not a homogeneous substance but a mixture of carbonaceous materials and mineral matter, it has a variety of surface properties. Therefore, it is not easy to control the properties of coal suspensions by simply adjusting variables, such as pH and/or electrolyte. A chemical agent needs to be added to control the properties of the coal suspensions. The aim of this investigation is to determine the adsorption behavior of an anionic dispersant in the presence of a wetting agent using some Turkish lignite samples. The presence of a wetting agent in the dispersant adsorption behavior is important, since usage of a wetting agent in the preparation of coal–water slurries which are acceptable for potential industrial users is of great importance. The effects of dispersant concentration, temperature and pH on the dispersant adsorption were studied systematically, and the experimental results are presented. Pellupur B69 as a dispersant, commercial mixture of formaldehyde condensate sodium salt of naphthalene sulphonic acid, and Texapon N25 as a wetting agent, a sodium lauryl ether sulfate, have been used.     

Quantum‐Tunneling Metal‐Insulator‐Metal Diodes Made by Rapid Atmospheric Pressure Chemical Vapor Deposition

A quantum‐tunneling metal‐insulator‐metal (MIM) diode is fabricated by atmospheric pressure chemical vapor deposition (AP‐CVD) for the first time. This scalable method is used to produce MIM diodes with high‐quality, pinhole‐free Al₂O₃ films more rapidly than by conventional vacuum‐based approaches. This work demonstrates that clean room fabrication is not a prerequisite for quantum‐enabled devices. In fact, the MIM diodes fabricated by AP‐CVD show a lower effective barrier height (2.20 eV) at the electrode–insulator interface than those fabricated by conventional plasma‐enhanced atomic layer deposition (2.80 eV), resulting in a lower turn on voltage of 1.4 V, lower zero‐bias resistance, and better asymmetry of 107.     

Characterization of the Hansenula polymorpha CPY gene encoding carboxypeptidase Y

We have isolated the Hansenula polymorpha CPY gene encoding carboxypeptidase Y (Hp-CPY). The deduced amino acid sequence revealed that Hp-CPY consists of 541 amino acids and has a calculated Mr of 60,793. The protein is highly similar to Saccharomyces cerevisiae CPY (61.8% identity). At the N-terminus of Hp-CPY signals for the entry into the secretory pathway and subsequent sorting to the vacuole were identified. Immunocytochemically, using monospecific antibodies raised against Hp-CPY, the protein was localized to the vacuole. On Western blots, a diffuse protein band was observed in extracts of H. polymorpha cells, suggesting that the protein is glycosylated. This was confirmed by endoglycosidase H treatment, which resulted in a strong reduction of the apparent Mr of the protein. We have investigated the effect of CPY deletion on the degradation of peroxisomes, an autophagous process that occurs when the organelles become redundant for growth. In deltacpy cells peroxisomal proteins were degraded in the vacuole as efficiently as in wild-type H. polymorpha cells, indicating that CPY is not a major proteinase in this pathway.     

Penalized-likelihood estimators and noise analysis forrandoms-precorrected PET transmission scans

This paper analyzes and compares image reconstruction methods based on practical approximations to the exact log likelihood of randoms-precorrected positron emission tomography (PET) measurements. The methods apply to both emission and transmission tomography, however, in this paper we focus on transmission tomography. The results of experimental PET transmission scans and variance approximations demonstrate that the shifted Poisson (SP) method avoids the systematic bias of the conventional data-weighted least squares (WLS) method and leads to significantly lower variance than conventional statistical methods based on the log likelihood of the ordinary Poisson (OP) model. We develop covariance approximations to analyze the propagation of noise from attenuation maps into emission images via the attenuation correction factors (ACF's). Empirical pixel and region variances from real transmission data agree closely with the analytical predictions. Both the approximations and the empirical results show that the performance differences between the OP model and SP model are even larger, when considering noise propagation from the transmission images into the final emission images, than the differences in the attenuation maps themselves.