疏水缔合型聚丙烯酰胺的合成与性能评价

为了提高高相对分子质量的聚丙烯酰胺的抗温抗盐性能,利用自制的两亲表面活性单体与丙烯酰胺共聚合成了疏水缔合型聚丙烯酰胺并进行室内评价。结果表明,在高温、高盐、高钙条件下,合成的疏水缔合型聚丙烯酰胺具有良好的增粘性和较强的热稳定性;克服了疏水缔合型聚合物在盐水中溶解性差的问题,可用各种矿化度的盐水和油田产出污水配制;具有良好的无机盐增粘性能和抗温性能。     

徽派园林的保护、继承与创新

文章从对中国江南古典园林中重要的一支——徽派园林的现状分析出发,提出了对徽派园林保护和利用的方向和策略,阐述了对徽派园林加以继承和创新的意义和方法。     

Restraining the associations of anthracene fluorophore by chemically linking to poly(methyl methacrylate)

Associations (dimer or aggregate) of anthracene (An) fluorophores tend to interrupt the monomer emission and reduce the quantum yield (Φ_PL); therefore, poly(methyl methacrylate) (PMMA) chain was used in this study to chemically link to anthracene and to block the mutual associations among the anthracene fluorophores. With this aim, the target polymers were prepared by anionic polymerizations with 9,10‐dibromoanthracene/s‐butyllithium as initiating system to proceed polymerizations of methyl methacrylate (MMA) directly or in the presence of 1,1‐diphenylethylene (DPE). Use of DPE before addition of MMA produces stable initiating anionic species and avoids potential side reactions during polymerization; however, it also introduces four β‐phenylene rings around the central anthracene ring, which interfere with the corresponding emission pattern and reduce the Φ_PL (32%) value due to potential interactions between phenylene rings and anthracene. On the contrast, polymerization without participation of DPE results in polymer with central anthracene ring directly connected to two PMMA chains, which gives clean vibronic emission pattern with limited association emissions and enhanced Φ_PL (52%) value. Physical blending of anthracene by PMMA is less efficient to restrain the associations and results in a film of lower Φ_PL (20%). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Polyaniline-multiwalled carbon nanotube composites: Characterization by WAXS and TGA

Polyaniline/carboxylated multi-walled carbon nanotube (PAni/c-MWNT) nanocomposites have been synthesized by micellar aided emulsion polymerization with various c-MWNTs compositions, viz., 0.5, 1, 5, and 10 wt %. The microcrystalline parameters such as the nanocrystal size (〈N〉), lattice strain (g), interplanar distance (d_hkl), width of the crystallite size distribution, surface weighted crystal size (D_s), and volume of the ordered regions were calculated from the X-ray data by using two mathematical models, namely the Exponential distribution and Reinhold distribution methods. The effects of heat ageing on the microcrystalline parameters of the PAni/c-MWNT nanocomposites were also studied and the results are correlated. The thermal stability and electrical resistivity of the PAni/c-MWNT nanocomposites were examined with thermogravimetric analysis (TGA) and a conventional two-probe method. The TGA data indicate that the thermal stability of the nanocomposites improved after the incorporation of c-MWNTs. The influence of temperature on the resistivity of the nanocomposites was also measured. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Performance enhancement of DS/CDMA system using chaotic complex spreading sequence

In this paper, a novel direct sequence/spread spectrum (DS/SS) communication system is proposed. This scheme exploits the two-dimensional complex valued chaotic Ikeda map as the spreading sequences. With this double spreading DS/SS system, the effect of multiple access interference can be mitigated by choosing the spreading sequences with appropriate cross-correlation properties. The performance of the system is assessed and demonstrated in a multiuser environment by means of computer simulation with additive white Gaussian noise, Rayleigh fading, and selective fading channel conditions. These studies reveal that the proposed system significantly outperforms the Gold code DS/SS-BPSK system in synchronous channel conditions. In asynchronous case, the improvement is substantial for low signal-to-noise ratios.     

Studies on the treatment of brilliant green solution by combination microwave induced oxidation with CoFe2O4

In this work the synergistic effects of microwave (MW) irradiation induced oxidation processes and CoFe₂O₄ were studied for the degradation of brilliant green (BG) from aqueous solutions. Under the optimum condition, the ratio of solid to liquid was 1:167 (0.3 g CoFe₂O₄ mixed with 50 mL of 20 mg L⁻¹ BG solution), MW power 600 W, and the time of the irradiation 2 min. And the decolorization rate could reach up to 100%. Further investigation showed that BG was degraded by MW-induced oxidation combined with CoFe₂O₄ surface adsorption. The CoFe₂O₄ could increase the efficiencies of MW degradation and be used repeatedly. The experimental results indicated that the method of MW degradation BG in the presence of CoFe₂O₄ could reduce reaction time and increase product yield.     

Neighborhood disadvantage moderates associations of parenting and older sibling problem attitudes and behavior with conduct disorders in African American children.

Data from 296 sibling pairs (mean ages 10 and 13 years), their primary caregivers, and census records were used to test the hypothesis that African American children's likelihood of developing conduct problems associated with harsh parenting, a lack of nurturant-involved parenting, and exposure to an older sibling's deviance-prone attitudes and behavior would be amplified among families residing in disadvantaged neighborhoods. A latent construct representing harsh-inconsistent parenting and low levels of nurturant-involved parenting was positively associated with younger siblings' conduct disorder symptoms, as were older siblings' problematic attitudes and behavior. These associations were strongest among families residing in the most disadvantaged neighborhoods. Future research and prevention programs should focus on the specific neighborhood processes associated with increased vulnerability for behavior problems. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Research on the Distant Hybrids of Wheat Obtained via Low-Energy Ion-Beam Implantation

Abstract The whole DNA of soybean was implanted into four varieties of wheat of Zhongyu5, Huaiyin 9628, Wenyou 1, Jimai 5 respectively via ion-beam mediation. There were 5 plantsobtained whose protein content was higher than 18.5%, the highest one was 21.44%. There were 3plants obtained whose protein content was lower than 11.5%, the lowest one was 10.96%. We cansee that the whole DNA of soybean transformed into wheat via ion beam implantation can inducethe increase in wheat protein content dramatically. The result also shows that the transformationefficiency of different gene types of wheat receptor varies greatly that the implanting time has acertain effect on the efficiency of transformation.     

Shear mode coupling and tilted grain growth of A1N thin films in BAW resonators.

Polycrystalline A1N thin films were deposited by RF reactive magnetron sputtering on Pt(111)/Ti electrode films. The substrates were tilted by an angle ranging from 40 degrees to 70 degrees with respect to the target normal. A low deposition temperature and a high sputter gas pressure were found ideal for tilted growth. The resulting grain tilt angle amounts to about half the substrate tilt angle. For coupling evaluation, 5 GHz solidly mounted resonator structures have been realized. The tilted grain A1N films exhibited a permittivity in the 9.5-10.5 range and loss tangent of 0.3%. Two shear modes as well as the longitudinal mode could be clearly identified. The coupling coefficient k2(eff) of the fundamental thickness shear mode (TS0) was found to be about 0.5%, which is compatible with a c-axis tilt of about 6 degrees.     

A novel in situ synthesis of dicalcium phosphate dehydrate nanocrystals in biodegradable polymer matrix

In the paper, we found a novel method to synthesize dicalcium phosphate dehydrate (DCPD) nanocrystals by in situ reaction in biodegradable PDLLA matrix. Calcium hydrid was selected as calcium source of DCPD, which is different from general methods. The method is not only simple and effective to synthesize Ca–P particles, but also can avoid the aggregation of inorganic nanoparticles in the course of their being dispersed into polymer matrix.