铁钴钒软磁合金损耗谱的分形结构

研究了铁钴钒软磁合金的铁芯损耗，发现铁芯损耗谱具有分形结构。讨论了带材厚度和磁感应强度对分形维数Ｄｆ的影响。     

室温下Ho∶YAG激光器输出3J的2．1μm激光

根据对２．１μｍ波长Ｃｒ，Ｔｍ，Ｈｏ∶ＹＡＧ激光器的实验研究，详细分析了冷却温度、放电脉冲半宽度和输出镜透过率等因素对激光器的输出的影响     

Testing of multi-output circuits by means of signature analyzer

Let a circuit havem outputs,m>1. There are two ways to test this circuit by means of a signature analyzer: use a single input analyzer for each output or use anm-input analyzer to test all outputs simultaneously. The main goal of this letter is to demonstrate that for fault output sequences with small multiplicity of errors and long length the second approach is more effective.     

前轮毂旋转弯曲疲劳断裂分析

采用化学分析，金相检验，力学性能测试及扫描电镜分析方法对轿车前轮毂早期断裂原因进行了分析。结果表明，冷却不足使组织中出现网状及小块状铁素体，导致硬度偏低，加之磨削加工痕迹较粗是引起前轮毂早期断裂的原因。     

Viterbi译码器的硬件实现

介绍了一种Vkerbi译码器的硬件实现方法。设计的基于硬判决的Viterbi译码器具有约束长度长（9)、译码深度深（64)的特点。为了兼顾硬件资源与电路性能两个方面，在设计中使用了4个ACS单元，并根据Xilinx Virtex系列FPGA的结构特点．利用FPGA内部的BlockRAM保存汉明距离和幸存路径，提高了译码速度。     

GH2027铁基高温合金的第二相研究

运用电子显微分析和波谱分析等方法对ＧＨ２０２７合金的第二相进行了研究，结果表明，合金晶界相主要是片状Ｍ６Ｃ和薄膜状Ｍ２３Ｃ６，经波纹图样测得其错配度约为３％，晶内Ｍ６Ｃ和Ｍ２３     

广播电视中心发展新趋势——多媒体化初探

本文讨论了多媒体技术所需的软硬件基础和网络传输技术，及其在数字化广播电视中心节目制作中的应用，展望了无磁带广播电视中心有美好前景，在此基础上提出了完整的广播电视中心多媒体系统结构图。     

Pathway engineering for the production of aromatic compounds in Escherichia coli

The standard enzymatic assay for quantification of D-sorbitol in plasma was adapted to the automatic analyzer Cobas Mira S. In the assay, NAD (reagent) in the presence of sorbitoldehydrogenase (SDH; start reagent) converts D-sorbitol to fructose with formation of NADH, which was detected automatically as the difference between the first and last readings at 340 nm. The sample blank values for each specimen were subtracted to exclude both endogenous D-sorbitol and sugars, which also react as substrates for SDH. The method is simple, rapid (40 samples/h), precise down to endogenous concentrations (coefficient of variation < 5%; limit of determination: 0.38 mg/L) and linear up to 100 mg/L. Samples with higher D-sorbitol concentrations were estimated after dilution. The method was used to measure disposition curves of sorbitol in volunteers after a single intravenous dose of 0.8 g sorbitol.     

用于高压电容器的SrTiO3基陶瓷

报道ＳｒＴｉＯ３基陶瓷的制备方法和介电性质，给出了用此种陶瓷制成的高压电容器的试验结果，并对它位进行了讨论。     

Object-extending class transformations

Reorganisation and evolution of class hierarchies is important for object-oriented system development and has received considerable attention in the literature. The contributions of this paper are: (1) a formal study of a set of extension relations and transformations on class hierarchies; (2) a presentation of a small set of primitive transformations which form a minimal and complete basis for the extension relations; and (3) an analysis of the impact of these transformations at the object level.The study leads to a better understanding of evolution and reuse of object-oriented software and class hierarchies. It also provides a terminology and a means of classification for design reuse. The theory presented in this paper is based on the Demeter data model, which gives a concise mathematical foundation for classes and their inheritance and part-of relationships. Parts of the theory have been implemented in the Demeter System ^TM C++, a CASE tool for object-oriented design and programming.