Minimum copper loss flux-weakening control of surface mounted permanent magnet synchronous motors

This study presents a novel current loop design method capable of automatic flux-weakening control with minimum copper loss for surface mounted permanent magnet synchronous motors (SPMSM). The proposed current controller can automatically re-compute the d-axis current command to defer output voltage saturation. Consequently, the motor operations in the flux-weakening region are also contained in the stable operating region. Analysis results indicate that since the output voltage vector in the flux-weakening region produced by this controller is consistently on the boundary of the maximum output voltage vector allowed by the inverter, the corresponding flux-weakening current is the optimal value in the sense of minimum copper loss. This minimum copper loss design differs from the maximum output torque design and the constant power design of the flux-weakening control methods found in the literature. Experimental results further demonstrate the feasibility of the proposed current controller and its ability to maximize the speed range of the motor drive for a given inverter capacity.     

A broadband PHEMT MMIC distributed doubler using high-pass drain line topology

A broadband frequency doubler, based on distributed amplifier techniques, has been designed to operate from 11 to 21 GHz. In order to reject the fundamental signal over a broadband frequency range, the conventional low-pass drain line structure was replaced with the high-pass structure. This topology can suppress fundamental signals over broadband without any balanced structure so that the chip size can be more compact. Measured conversion losses of better than 10 dB from 11 to 21 GHz input frequencies are achieved with fundamental signal rejection better than 12 dB. To the best of our knowledge, this is the first demonstration of distributed doubler using the high-pass drain line topology.     

Adaptive perceptual color-texture image segmentation.

We propose a new approach for image segmentation that is based on low-level features for color and texture. It is aimed at segmentation of natural scenes, in which the color and texture of each segment does not typically exhibit uniform statistical characteristics. The proposed approach combines knowledge of human perception with an understanding of signal characteristics in order to segment natural scenes into perceptually/semantically uniform regions. The proposed approach is based on two types of spatially adaptive low-level features. The first describes the local color composition in terms of spatially adaptive dominant colors, and the second describes the spatial characteristics of the grayscale component of the texture. Together, they provide a simple and effective characterization of texture that the proposed algorithm uses to obtain robust and, at the same time, accurate and precise segmentations. The resulting segmentations convey semantic information that can be used for content-based retrieval. The performance of the proposed algorithms is demonstrated in the domain of photographic images, including low-resolution, degraded, and compressed images.     

Associative properties of perfluorooctyl end‐functionalized polystyrene–poly(ethylene oxide) diblock copolymers

The synthesis of 2,2,3,3‐tetrahydro‐perfluoroundecanoyl end‐functionalized polystyrene–poly(ethylene oxide) block (PS‐block‐PEO‐R_F) copolymers and their matching PS‐block‐PEO diblock copolymers was carried out by sequential anionic polymerization. Viscometry and ¹⁹F NMR studies show that the PS‐block‐PEO copolymers, in contrast to their matching PS‐block‐PEO‐R_F copolymers, exhibit a micellar rather than the associative behavior seen for the latter. However, the presence of an excess of fluorinated acid, used for end‐functionalization, produces a reduction of the associative behavior above the overlap concentration, with the fluorinated acid acting like a surfactant. A competition may also occur between PS—and R_F—mediated micellization. Copyright © 2004 Society of Chemical Industry     

通用的自然语言词法分析机制

本文提出了一种通用的自然语言词法分析技术,其处理机构不仅可以独立于具体自然语言,而且又具有适合于未来智能计算机直接处理的规则形式和实现过程.文中还详细讨论了独立于自然语言的词法分析技术,以及我们在IMT/EC系统中实现的词法分析机制的工作原理.     

Methacryloxyethyl phosphate‐grafted expanded polytetrafluoroethylene membranes for biomedical applications

Expanded polytetrafluoroethylene (ePTFE) membranes were modified by graft copolymerization with methacryloxyethyl phosphate (MOEP) in methanol and 2‐butanone (methyl ethyl ketone (MEK)) at ambient temperature using gamma irradiation. The effect of dose rate (0.46 and 4.6 kGy h^?1), monomer concentration (1–40 %) and solvent were studied and the modified membranes were characterized by weight increase, X‐ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). XPS was used to determine the % degree of surface coverage using the C? F (ePTFE membrane) and the C? C (MOEP graft copolymer) peaks. Grafting yield, as well as surface coverage, were found to increase with increasing monomer concentration and were significantly higher for samples grafted in MEK than in methanol solution. SEM images showed distinctly different surface morphologies for the membranes grafted in methanol (smooth) and MEK (globular), hence indicating phase separation of the homopolymer in MEK. We propose that in our system, the non‐solvent properties of MEK for the homopolymer play a more important role than solvent chain transfer reactions in determining grafting outcomes. Copyright © 2005 Society of Chemical Industry     

美容秘方全球搜Ⅱ

当我们再次重新拣起“美容秘方全球搜”这个话题，心情已经不再像以往那样惊奇，无论是哪个国家、哪个地区，都对美丽充满向往，也都有各自独特的美容高招，在这一期，我们将分别为您介绍澳大利亚、意大利．巴厘岛、埃及的异域美女的靓丽秘方。     

聚氨酯/聚(甲基丙烯酸甲酯-甲基丙烯酸丁酯)互穿聚合物网络聚合物的阻尼性能

采用本体聚合法合成出一系列阻尼性能良好的聚氨酯/聚(甲基丙烯酸甲酯-甲基丙烯酸丁酯)(PU/P(MMA-BMA))互穿聚合物网络(IPN)聚合物,通过动态力学分析方法表征了PU/P(MMA-BMA)IPN聚合物的阻尼性能。探讨了加入催化剂、高温后处理、交联剂用量及PU与P(MMA-BMA)的质量比对PU/P(MMA-BMA)IPN聚合物阻尼性能的影响。实验结果表明,经高温后处理后,以二月桂酸二丁基锡为催化剂、交联剂二乙烯基苯用量(占MMA和BMA的摩尔分数)为1.5%、PU与P(MMA-BMA)的质量比接近1或小于1时,PU/P(MMA-BMA)IPN聚合物具有良好的阻尼性能。     

In situ polymerization and characterization of polyester‐based polyurethane/nano‐silica composites

Polyester‐based polyurethane/nano‐silica composites were obtained via in situ polymerization and investigated by Fourier‐transform infrared spectroscopy (FTIR), or FTIR coupled with attenuated total reflectance (FTIR‐ATR), Transmission electron microscopy (TEM), atomic force microscopy (AFM), an Instron testing machine, dynamic mechanical analysis (DMA) and ultraviolet‐visible spectrophotometry (UV‐vis). FTIR analysis showed that in situ polymerization provoked some chemical reactions between polyester molecules and nano‐silica particles. FTIR‐ATR, TEM and AFM analyses showed that both surface and interface contained nano‐silica particles. Instron testing and DMA data showed that introducing nano‐silica particles into polyurethane enhanced the hardness, glass temperature and adhesion strength of polyurethane to the substrate, but also increased the resin viscosity. UV‐vis spectrophotometry showed that nano‐silica obtained by the fumed method did not shield UV radiation in polyurethane films. Copyright © 2003 Society of Chemical Industry