Exhaustive Output Arbitration of Input Buffered Switch with Buffered Crossbar

We propose a new arbitration method for an input buffered switch with a buffered crossbar. In the proposed method, an exhaustive polling method is used to decrease the synchronization. Using an approximate analysis, we explain how the proposed method improves the switch performance. Also, using computer simulations, we show the proposed method outperforms the previous methods under burst traffic.     

基于AVR单片机的图书录入系统

介绍一种AVR单片机在图书录入系统中的应用,对系统的软件和硬件设计做了说明。本设计以高性能、低功耗的8位AVR微处理器ATmega32L为核心,通过控制步进电机实现执行机构的移动、定位等功能,对书籍进行自动翻页、拍照,适用于有收藏价值、书况不好的书籍的电子图像录入保存。     

Performance of Efficient Signal Detection for LED-ID Systems

In this paper, effects of reader-to-reader interference are investigated for LED identification (LED-ID) system in a multi-reader environment. The LED-ID readers typically use different channels to avoid collision between readers. However, in-channel collision usually happens in terms of interrogation range. A reader-to-reader interference scenario is proposed, and nominal interrogation range of a desired reader is derived from this model. In order to evaluate the LED-ID reader-to-reader interference quantitatively, an efficient detection scheme is proposed and simulated by employing spreading sequence. The spreading sequence is inserted between each user’s frame formats. In the receiver, the desired signal is detected by using correlation among inserted spreading sequences. From simulation results, it is confirmed that the proposed scheme is very effective to enhance reliability of LED-ID communication systems.     

直埋光缆接头盒浸水防治的措施

直埋光缆线路接头盒浸水问题是一直困扰光缆线路维护的一个难题,本文通过对凡士林规格及性能的分析,利用凡士林对光缆接头盒进行密封安装实验.实验表明凡士林防水性能良好,适合作预防光缆接头盒浸水材料.     

PCCC for the performance improvement of the wireless optical communication system

Opticalwireless,alsoknownasfree spaceoptics,isa cost effectiveandwidebandwidthaccesstechniqueandreceivesgrowingattentionwithrecentcommercialization success.Buttheperformanceofwirelessopticalcommu nicationwouldbeimpairedintheatmosphericchannelbyattenuation…     

Photomultiplication-Type Organic Photodetectors with High EQE-Bandwidth Product by Introducing a Perovskite Quantum Dot Interlayer

A photomultiplication (PM)-type organic photodetector (OPD) that exploits the ionic motion in CsPbI₃ perovskite quantum dots (QDs) is demonstrated. The device uses a QD monolayer as a PM-inducing interlayer and a donor–acceptor bulk heterojunction (BHJ) layer as a photoactive layer. When the device is illuminated, negative ions in the CsPbI₃ QD migrate and accumulate near the interface between the QDs and the electrode; these processes induce hole injection from the electrode and yield the PM phenomenon with an external quantum efficiency (EQE) >2000% at a 3 V applied bias. It is confirmed that the ionic motion of the CsPbI₃ QDs can induce a shift in the work function of the QD/electrode interface and that the dynamics of ionic motion determines the response speed of the device. The PM OPD showed a large EQE-bandwidth product >10⁶ Hz with a −3 dB frequency of 125 kHz at 3 V, which is one of the highest response speeds reported for a PM OPD. The PM-inducing strategy that exploits ionic motion of the interlayer is a potential approach to achieving high-efficiency PM OPDs.     

1.54 lm GaSb/AlGaSb multi-quantum-well monolithic laser at 77 K grown on miscut Si substrate using interfacial misfit arrays

A GaSb quantum-well (QW) laser diode grown monolithically on a 5deg miscut Si (001) substrate is presented. The III-Sb epi-structure is grown monolithically on the miscut Si substrate via a thin (50 nm) AlSb nucleation layer. The 13% lattice mismatch between AlSb and Si is accommodated by a self-assembled 2D array of interfacial misfit dislocations (IMF). The 5deg miscut geometry enables simultaneous IMF formation and anti-phase domain suppression. The 1 mm times 100 mum GaSb QW laser diode operates under pulsed conditions at 77 K with a threshold current density of 2 kA/cm² and a maximum peak power of ~20 mW. Furthermore, the device is characterised by a 9.1 Omega forward resistance and a leakage current density of 0.7 A/cm² at -5 V.     

融合地址簿系统关键技术研究

融合地址簿系统是对位于多种终端的多种用户地址进行综合管理的业务新技术,其显著优点是当任一联系人的信息改变时能够对所有本地地址簿进行及时更新,有效地解决地址数据的失效问题。本文研究了融合地址簿系统中数据同步更新和订阅的关键实现技术,给出了系统架构,并给出了系统的仿真测试。     

Significantly Enhanced Photoluminescence of Doped Polymer‐Metal Hybrid Nanotubes

We report on the significantly enhanced photoluminescence (PL) of hybrid double‐layered nanotubes (HDLNTs) consisting of poly(3‐methylthiophene) (P3MT) nanotubes with various doping levels enveloped by an inorganic, nickel (Ni) metal nanotube. From laser confocal microscopy PL experiments on a single strand of the doped‐P3MT nanotubes and of their HDLNTs, the PL peak intensity of the HDLNT systems increased remarkably up to ～350 times as the doping level of the P3MT nanotubes of the HDLNTs increased, which was confirmed by measurements of the quantum yield. In a comparison of the normalized ultraviolet and visible absorption spectra of the doped‐P3MT nanotubes and their HDLNTs, new absorption peaks corresponding to surface‐plasmon (SP) energy were created at 563 and 615 nm after the nanoscale Ni metal coating onto the P3MT nanotubes, and their intensity increased on increasing the doping level of the P3MT nanotube. The doping‐induced bipolaron peaks of the HDLNTs of doped‐P3MT/Ni were relatively reduced, compared with those of the doped‐P3MT nanotubes before the Ni coating, due to the charge‐transfer effect in the SP‐resonance (SPR) coupling. Both energy‐transfer and charge‐transfer effects due to SP resonance contributed to the very‐large enhancement of the PL efficiency of the doped‐P3MT‐based HDLNTs.     

宽带数字信道化接收机算法研究与硬件实现

对宽带数字信道化接收机进行了理论研究与硬件实现。该系统模型采用多相滤波结构,使用IFFT算法简化信道化多相滤波器结构与参数,并对各个信道进行下变频产生基带信号以便后续信号识别分析处理,信道化频带划分采用均匀且相邻信道50%交叠的方式。该系统硬件采用A/D转换芯片和FPGA芯片实现,A/D转换芯片完成宽带信号采集,FPGA芯片完成相关算法软件实现。该接收机结构具有设计灵活、实现简单、计算效率高、实时处理能力强、计算量低、FPGA硬件资源少等优点。