Adsorption and desorption characteristics of 2-methyl-4-chlorophenoxyacetic acid onto activated carbon

Adsorption and desorption characteristics of the 2-methyl-4-chlorophenoxyacetic acid (MCPA) from aqueous solution onto the activated carbon (GAC, F-400) were studied. Adsorption equilibrium capacities of the MCPA increased with decreasing pH and temperature of the solution. Adsorption equilibrium of the MCPA could be represented by the Sips equation. The internal diffusion coefficients were determined by comparing the experimental concentration decay curves with those predicted from surface diffusion model and pore diffusion model. The adsorption model based on the linear driving force approximation (LDFA) was used for simulating the adsorption behavior of the MCPA in a fixed bed. Over ninety five percent desorption of the MCPA could be obtained using distilled water.     

Monodisperse polymer/metal composite particles by electroless chemical deposition: Effect of surface functionality of polymer particles

Micron‐sized polymer particles were coated with layers of nickel compounds by plating electrolessly in the presence of aqueous solutions of nickel chloride, sodium hypophosphite, sodium citrate, and ammonium chloride at elevated temperature. The uniform functional polymer particle could be obtained by seeded polymerization. To investigate the effect of surface functionality on the conditions for nickel deposition, the polymer particle was functionalized with the thiol group. From morphological observation, it was found that the mode of nickel deposition was greatly dependent on the surface functionality of the polymer particle. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 420–424, 2003     

Preparation of nano-sized silicon carbide powder using thermal plasma

Nano-sized silicon carbide (SiC) powder was prepared by thermal plasma process using silicon tetrachloride (SiCl₄) and methane (CH₄). The synthesized powder was characterized by X-ray diffraction pattern, scanning electron microscopy, transmission electron microscopy, FT-IR spectroscopy and particle size analyzer. The powder was dominated by β-SiC including some of α-SiC and free carbon species. The quality of the powder was varied with process conditions such as the molar ratio of H/Si and C/Si, and collecting positions. It was known that the conversion to SiC was mainly affected by the addition of hydrogen gas because it promoted the decomposition and reduction of SiCL. CH₄ was easily decomposed to carbon species for the formation of SiC as well as removal of impure oxygen, but excessive carbon suppressed the formation of crystalline SiC and resulted in the solid carbon contamination. The optimum ratio of H/Si was approx. 26 and that of C/Si was 1.1. For collecting positions, the powder collected at the vessel and filter was preferable to that at the reaction tube. The average size of the powder synthesized was estimated to be below 100 nm and uniform in distribution.     

AMMONIA CATALYZED ORGANOSOLV DELIGNIFICATION OF POPLAR

A parametric investigation of NH₄OH catalyzed solvent delignification of poplar was conducted to define pretreatment conditions which would yield an optimal separation of the biomass components and an enzymatic susceptible solid carbohydrate phase. Delignification parameters of interest included concentration of NH₄OH, time and temperature of the reaction, and type of solvent. The addition of 0.82 M NH₄OH to the delignification liquor increased lignin removal and decreased carbohydrate degradation, but increasing NH₄OH concentration had no additional effect. At lower reaction temperatures, the extent of delignification increased with reaction time; at higher temperatures, a “relignification” of the pretreated wood was observed. The delignification and hemicellulose solubilization were modelled and rate constants reported. No major difference between three potential pulping solvents—ethanol, butanol, phenol—was observed. The enzymatic susceptibility of pretreated wood samples was approximately 6-fold greater than that of the untreated poplar. UV absorbance was used to qualitatively characterize the soiubilized lignins.     

Concentration of tocopherols from soybean sludge by supercritical carbon dioxide

A supercritical fluid extraction method has been applied to test the feasibility of tocopherol concentration from soybean sludge with carbon dioxide at temperatures and pressures ranging from 35 to 70°C and 200 to 400 bar, respectively. The supercritical solubility of the esterified soybean sludge was over 4–6 times greater than that of the original soybean sludge. By a simple batch-type one-stage method the tocopherols in the esterified soybean sludge could be concentrated up to 40 wt%. The overall results of the present study show that soybean sludge initially containing about 13–14 wt% tocopherols may require a countercurrent multistage column to be highly and effectively concentrated.     

Thermal conductivity of high polymers—the influence of molecular weight

Some earlier observations on the influence of molecular weight, plasticizer, and irradiation on the thermal conductivity of polymers is reviewed. Also some new data on polystyrene and some new calculations based on the theory of Hansen and Ho are presented. These data show almost a two fold increase in the thermal conductivity of polystyrene as the molecular weight goes from 900 to 100,000. Data on the moleculer weight effect on thermal conductivity appear to be consistent with the theoretical calculations.     

High catalytic activity of PdOx/MnO2 for CO oxidation and importance of oxidation state of Mn

PdO_x/MnO₂ has been examined as a catalyst for CO oxidation using a conventional flow reactor at reaction temperatures between 50 and 150°C. In the reaction conditions of GHSV (gashourlyspacevelocity) of 1.22 × 10⁵/h and CO concentration of 2000 ppm, PdO_x/MnO₂ showed higher catalytic activity compared with PdO_x/Mn₂O₃, which had been previously reported as an effective catalyst due to the cooperative action of Pd and Mn₂O₃ for this reaction. The reason for higher activity of PdO_x/MnO₂ than PdO_x/Mn₂O₃ has been investigated using TPR (temperatureprogrammed reduction) and XPS studies. TPR showed that PdO_x/MnO₂ could be reduced by CO at much lower temperature than PdO_x/Mn₂O₃. During the experiment of reduction and oxidation, XPS showed that the valence of Mn in the PdO_x/MnO₂ was between 4+ and 3+, which is higher than that of Mn in the PdO_x/Mn₂O₃ catalyst of which the valence has been reported to be between 3+ and 2+. It is known that in this catalyst system the support supplies oxygen onto Pd, where the oxidation occurs with adsorbed CO, and the ability of the support to provide oxygen improves the performance of the catalyst. Therefore, it was concluded that the readiness of MnO₂ to be reduced with maintaining a higher oxidation state showed higher CO oxidation activity than Mn₂O₃ as support for PdO_x.     

Effect of extrusion temperature on elongational flow behavior of PVC melt

The effect of the sample extrusion temperature between 160° and 180°C on the elongational flow properties of a low molecular weight suspension PVC (unplasticized) has been studied with the Rheometrics Extensional Rheometer. The results of both the tensile creep measurements at a constant stress of 24 KPa and the stretching experiment at a constant strain rate of 0.01 sec^?1 indicated the existence of a rheological transition at 185°C marked by the dual valued flow activation energy and also by the temperature dependence of the tensile stress-strain curves. Increasing extrusion temperature increased both the flow activation energy and the extensional viscosity below the transition temperature.     

An Analytical Approach to Creating Multitouch Gesture Vocabularies in Mobile Devices: A Case Study for Mobile Web Browsing Gestures

This study proposes an analytical approach to the creation of multitouch control-gesture vocabularies applicable to mobile devices. The approach consists of four steps: (a) identifying target commands, (b) extracting gesture features of the target commands, (c) analyzing usage patterns based on elements that consist of multitouch gestures, and (d) creating gesture vocabularies based on the gesture features and elements. Usefulness and practicality of the proposed approach were validated in a case study. The case study created 11 mobile web browsing gestures to improve short-cut interactions. Six volunteers created gestures based on systematic procedures and practical methods. A total of 314 gestures were created in the case study, and the results were compared with those of a previous study that used an empirical approach to design control gestures. The proposed approach helped designers to create appropriate gestures for various commands on mobile devices. It was very practicable for all designers, including even novice users.     

Interaction of CETP inhibitory peptide and lipoprotein substrates in cholesteryl ester transfer assay: relationship between association properties and inhibitory activities

In a previous study, CETP inhibitory peptide (3 kDa) was isolated from hog plasma. The peptide, synthesized chemically according to the amino acid sequence of the 3-kDa peptide (designated P₂₈), showed CETP inhibitory activity both in vitro and in vivo [Cho et al. (1998) Biochim. Biophys. Acta 1391, 133–144]. We report herein further unique features of P₂₈ when it was associated with the cholesteryl ester (CE)-donor and-acceptor lipoproteins. Lipoprotein substrates with P₂₈ present in both HDL (as a CE-donor) and LDL (as a CE-acceptor) served as poor substrates, with CE-transfer activity decreased up to 60% compared to normal substrates without P₂₈. P₂₈ was found to be located in HDL fractions of hog plasma and showed the same electromobility as that visualized by PAGE on 7% polyacrylamide gel under nondenaturing conditions. Addition of apolipoprotein A-1 (apoA-1) or apoB antibody to a normal CE-transfer mixture did not alter CE-transfer activity. However, addition of apoA-1 or −B antibody to a CETP-inhibition mixture decreased the inhibitory activity of P₂₈ by ca. 20%. Western blot analysis revealed that P₂₈ was associated only with human and hog HDL among several lipoproteins purified from human, hog, and rabbit. CFTP-inhibition assays with various lipoprotein substrates revealed that P₂₈ exhibited substrate-specific inhibitory activity. The inhibitory activity of P₂₈ was highly dependent on the type of lipoprotein substrate (whether CE-donor or-acceptor); P₂₈ inhibited CE transfer from HDL to LDL, but it did not inhibit CE transfer from HDL to HDL.