A Pragmatic Design for 3GPP/WLAN RAN Level Interworking

Wireless Personal Communications - As mobile data traffic continues to grow significantly, traffic offloading is an important issue. Since WiFi-capable user equipments (UEs) are very popular...     

Displacements and stresses due to a vertical point load in an inhomogeneous transversely isotropic half-space

We present the solutions for displacements and stresses subjected to a vertical point load in a continuously inhomogeneous transversely isotropic half-space with Young's and shear moduli varying exponentially with depth. Planes of transverse isotropy are assumed to be parallel to the horizontal surface. The solutions for the half-space are obtained by superposing the solutions of two full spaces, one with a point load in its interior and the other with opposite traction of the first full space along the z=0 plane. The Hankel transform in a cylindrical co-ordinate system is employed for deriving the solutions. However, the resulting integrals for displacements and stresses involve polynomial, exponential function, and Bessel function that cannot be given in closed form; hence, numerical techniques are adopted in this work. In order to check the accuracy of numerical procedures, the comparisons are carried out with the homogeneous solutions of Liao and Wang, and the calculated results agree with those to nine decimal places. Furthermore, two illustrative examples are presented to elucidate the effect of inhomogeneity, and the type and degree of rock anisotropy on the vertical surface displacement and vertical normal stress in the inhomogeneous isotropic/transversely isotropic rocks subjected to a vertical concentrated force acting on the surface. The calculated results show that the induced displacement and stress are decisively influenced by the inhomogeneity, and the degree and type of material anisotropy. The proposed solutions can more realistically simulate the actual stratum of loading problem in many areas of engineering practice.     

High-speed mass analysis of whole erythrocytes by charge-detection quadrupole ion trap mass spectrometry

Herein, we report an application of charge-detection quadrupole ion trap mass spectrometry to the measurement of total dry masses of mammalian and poultry erythrocytes evaporated/ionized by laser-induced acoustic desorption. The method is rapid and widely applicable. Eight different types of red blood cells (RBCs) have been successfully analyzed, including those of human, goat, cow, mouse, pig, and chicken. The measured mean masses (weights per corpuscle) range from 0.58 x 10(13) Da (9.6 pg) of goat RBCs to 2.80 x 10(13) Da (46.5 pg) of chicken RBCs. The total dry weights determined for human RBCs from a healthy male adult, a patient with iron-deficiency anemia, and a patient with thalassemia are 34.8, 28.8, and 20.6 pg, respectively. These weights, except that of thalassemia, are all approximately 10% higher than their corresponding mean corpuscular hemoglobin values determined by a commercial automated hematology analyzer. The mass distribution profiles of the cells are all near-Gaussian, with a standard deviation of 15% for the normal human RBCs. The deviation increases significantly to 20% for RBCs with thalassemia characteristics and 27% for RBCs with iron-deficiency anemia characteristics. All the observations are in accord with their corresponding mean corpuscular volume measurements, indicating an increase in anisocytosis (variation in RBC size) in the anemic samples. Our results suggest a broad and promising application of this new technology to high-speed mass analysis of RBCs and other biological whole cells as well.     

Mechanical behavior of two-dimensional carbon/carbon composites with interfacial carbon layers

Effect of interfacial carbon layers on the mechanical properties and fracture behavior of two-dimensional carbon fiber fabrics reinforced carbon matrix composites were investigated. Phenolic resin reinforced with two-dimensional plain woven carbon fiber fabrics was used as starting materials for carbon/carbon composites and was prepared using vacuum bag hot pressing technique. In order to study the effect of interfacial bonding, a carbon layer was applied to the carbon fabrics in advance. The carbon layers were prepared using petroleum pitch with different concentrations as precursors. The experimental results indicate that the carbon/carbon composites with interfacial carbon layers possess higher fracture energy than that without carbon layers after carbonization at 1000°C. For a pitch concentration of 0.15 g/ml, the carbon/carbon composites have both higher flexural strength and fracture energy than composites without carbon layers. Both flexural strength and fracture energy increased for composites with and without carbon layers after graphitization. The amount of increase in fracture energy was more significant for composites with interfacial carbon layers. Results indicate that a suitable pitch concentration should be used in order to tailor the mechanical behavior of carbon/carbon composites with interfacial carbon layers.     

Effective Utilization of Hypercubes in the Presence of Faults

To effectively utilize a faulty hypercube, it is often necessary to reconfigure the hypercube in such a way as to retain as many fault-free nodes as possible. This inspires us to identify maximalincomplete subcubesin a faulty hypercube, as the subcube so reconfigured is often much larger than any complete subcube obtainable and is likely to retain performance better. An efficient algorithm is first presented to find incomplete subcubes in a faulty hypercube. Three applications are then implemented on both an incomplete system and a complete one to measure their actual performance differences. Each application is mapped onto incomplete hypercubes, following the techniques developed for complete hypercubes (possibly with some modifications). Among the three applications,Gaussian eliminationtakes exactly the same mapping scheme on an incomplete system as on a complete one, whileFFTrequires some efforts to adapt it to the incomplete topology. The measured results of the three applications indicate that reconfiguring a faulty hypercube into an incomplete subcube is beneficial in practice.     

Fabrication of carbon nanotubes field emission cathode by composite plating

Carbon nanotubes (CNTs) have high aspect ratio and have great potential to be applied as the field emission cathode because of its large field enhancement factor. In this work, a high performance carbon nanotube field emission cathode (CNTFC) was fabricated by using a composite plating method. The CNTs were purified by acid solutions and then dispersed in electrobath with nickel ions at temperatures of 60, 70, or 80 degrees C for the electroless plating process on glass substrate. The resulting CNT-Ni composite film has strong adhesion on the glass substrate. The degree of graphitization and the microstructure of the CNTFCs were studied by Raman spectroscopy and scanning electron microscopy. The field emission properties of the CNTFCs show a low turn-on electric field E(on) of about 1.2 V/microm, and a low threshold electric field E(th) of about 1.9 V/microm. Such a composite plating method could be applied to the fabrication of large area CNT field-emission displays.     

RF MEMS capacitive switch with leaky nanodiamond dielectric film

RF MEMS capacitive switches using leaky nanodiamond as a dielectric film are studied and compared with those using Si₃N₄. Characteristics of dielectric charging and discharging are analyzed at temperature ranging from − 196 °C to 150 °C. Electrical resistivity of leaky nanodiamond is measured to be lower than that of Si₃N₄ by 3 to 6 orders of magnitude at room temperature. Trapped charges in leaky nanodiamond dielectric discharge much more quickly than those in Si₃N₄ while the power dissipation of nanodiamond based switches remains low. As a result, charge trapping induced shift in electrostatic actuation voltage is greatly reduced compared to that with Si₃N₄ and becomes non-detectable under the reported conditions. RF MEMS capacitive switches based on leaky nanodiamond dielectric are, therefore, more reliable than those with Si₃N₄.     

Heat transfer behavior in a rotating aluminum foam heat sink with a circular impinging jet

This work experimentally studied heat transfer associated with an impinging jet onto a rotating heat sink. Air was used as the impinging coolant, and a square Al-foam heat sink was adopted. The variable parameters were the jet Reynolds number (Re), the relative nozzle-to-foam tip distance (C/d), the rotational Reynolds number (Re_r) and the relative side length of the square heat sink (L/d). The effects of Re, C/d, Re_r and L/d on the dimensionless temperature distributions and the average Nusselt number were considered. For a stationary system, the results reveal that the average Nusselt number (Nu₀) with Al-foam was two to three times that without Al-foam. Nu₀ increased with Re. A larger L/d responded to a larger Nu₀ based on the same jet flow rate. The effect of C/d on Nu₀ was negligible herein. For a rotating system, when Re and L/d were small and C/d was large, the average Nusselt number (Nu_Ω) increased considerably with Re_r. Additionally, for Nu_Ω/Nu₀ ? 1.1, the results suggest that rotation was substantial at Re_r/Re ? 1.13 when L/d = 4.615 with C/d = 0–5 and at Re_r/Re ? 1.07 when L/d = 3.0 with C/d = 0–5. For L/d = 2.222, rotation was substantial at Re_r/Re ? 1.44 when C/d = 0 and was always substantial when C/d ? 1.