Parathion degradation and toxicity reduction in solar photocatalysis and photolysis.

The solar photocatalytic degradation of methyl parathion was investigated using a circulating TiO2/solar light reactor. Under solar photocatalysis condition, parathion was more effectively degraded than solar photolysis and TiO2-only conditions. With solar photocatalysis, 20 mg/L of parathion was completely degraded within 60 min with a TOC decrease of 63% after 150 min. The main ionic byproducts during photocatalysis recovered from parathion degradation were mainly as NO3-, NO2- and NH4+, 80% of the sulphur as SO4(2-), and 5% of phosphorus as PO4(3-). The organic intermediates 4-nitrophenol and methyl paraoxon were also identified, and these were further degraded in solar photocatalytic condition. Two different bioassays (Vibrio fischeri and Daphnia magna) were used to test the acute toxicity of solutions treated by solar photocatalysis and photolysis. The Microtox test using V. fischeri showed that the toxicity expressed as EC50 (%) value increased from 5.5% to >82% in solar photocatalysis, indicating that the treated solution is non-toxic, but only increased from 4.9 to 20.5% after 150 min in solar photolysis. The acute toxicity test using D. magna showed that EC50 (%) increased from 0.05 to 1.08% under solar photocatalysis, but only increased to 0.12% after 150 min with solar photolysis, indicating the solution is still toxic. The pattern of toxicity reduction parallels the decrease in TOC and the parathion concentrations.     

A Shortcut Method for Estimating the HETP of Structured Packed Distillation Columns at Elevated Pressure

A shortcut model is developed for predicting the HETP of a structured packed distillation column operating at elevated pressure. The proposed model incorporates the geometrical parameters of the packing, physical properties of the vapor and liquid phases, and the hydrodynamics of the two‐phase flow. The proposed model is tested and validated by comparing the predicted results with the present experimental data and some published HETP data. The results show that the proposed model can predict the experimental data with a deviation smaller than 20 %.     

Highly Cooperative Tetrametallic Ruthenium-mu-Oxo-mu-Hydroxo Catalyst for the Alcohol Oxidation Reaction

The tetrametallic ruthenium-oxo-hydroxo-hydride complex {[(PCy(3))(CO)RuH](4)(mu(4)-O)(mu(3)-OH)(mu(2)-OH)} (1) was synthesized in two steps from the monomeric complex (PCy(3))(CO)RuHCl (2). The tetrameric complex 1 was found to be a highly effective catalyst for the transfer dehydrogenation of alcohols. Complex 1 showed a different catalytic activity pattern towards primary and secondary benzyl alcohols, as indicated by the Hammett correlation for the oxidation reaction of p-X-C(6)H(4)CH(2)OH (rho = -0.45) and p-X-C(6)H(4)CH(OH)CH(3) (rho = +0.22) (X = OMe, CH(3), H, Cl, CF(3)). Both a sigmoidal curve from the plot of initial rate vs [PhCH(OH)CH(3)] (K(0.5) = 0.34 M; Hill coefficient, n = 4.2+/-0.1) and the phosphine inhibition kinetics revealed the highly cooperative nature of the complex for the oxidation of secondary alcohols.     

Nickel and chromium cycles: Stocks and flows project part IV

Nickel and chromium are essential ingredients in alloys increasingly important for energy-efficient, environmentally friendly modern technology. Quantitative assessment of the flows of these metals through the world economy from resource extraction to final disposal informs resource policy, energy planning, environmental science, and waste management. This article summarizes the worldwide technological cycles of nickel and chromium in 2000. Stainless steel is the major use of these metals, but they serve numerous other special needs, as in superalloys for high-temperature service, as plating materials, and in coinage. Because they are used primarily in alloys, novel recycling issues arise as their use becomes more widespread. “... the great New York and St. Louis double track, nickel plated railroad...” — Norwalk, Ohio, Chronicle 10 March 1881 announces arrival of surveyors for the future Nickel Plate Railway “Later [1911] I formed an alloy of Iron and Chromium, which showed remarkable resistance to rust and tarnish ... [It was] rediscovered by an Englishman named Brearley, in 1914.” —Elwood Haynes to Stephen F. Roberts, 17 January 1925     

Influence of the silicon surface treatment by plasma etching and scratching on the nucleation of diamond grown in HFCVD - a comparative study

A comparative study for the nucleation of diamond was carried out using surface treatment like (i) surface scratching with 1 μm diamond paste and (ii) surface etching using chlorine plasma at different RF powers (50, 100 and 150 W). Atomic force microscopic study shows variation in roughness from 31 nm to 110 nm. Scratching results in random scratches, whereas plasma etches a surface uniformly. Scanning electron microscopic observations show well faceted crystallites with a predominance of angular shaped grains corresponding to 〈100〉 and 〈110〉 crystallite surfaces for the scratched as well as plasma etched substrate. Surface etching at 150 W plasma power results in a better growth in comparison with 50 and 100 W plasma powers. Chlorine-radical is found responsible for the changes in the growth morphology. Raman spectroscopy shows a sharp peak at 1,332 cm⁻¹ and a peak at ∼1,580 cm⁻¹ for both samples.     

Geotechnical properties of the soft soil in Guangzhou College City

The paper describes some geotechnical properties of the soft soils in Guangzhou College City, China, which are difficult to both sample and test. Laboratory and in situ tests were carried out to assess the physical and mechanical indices of the soils. The data were statistically analyzed and linear regression undertaken such that equations could be developed by which the geotechnical properties of the soft soils can be predicted. The statistical validity of the degree of correlation confirmed that using these equations, the mechanical indices can be estimated from physical indices determined by routine testing.      

Miniaturized Hexagonal Stepped-Impedance Resonators and Their Applications to Filters

Miniaturized hexagonal stepped-impedance resonators and their applications to bandpass filters are presented. Based on the odd- and even-mode equivalent circuits, the resonance characteristics of these resonators are investigated. A series of circuit configurations, including the third-order Chebyshev, trisection, and fifth-order cascaded trisection filters, are constructed by the proposed resonators. These filters are very compact and have good stopband responses. Measured results validate the analysis and theoretical prediction with good agreement.     

Equilibrium and crystallographic measurements of the binary tetrahydrofuran and helium clathrate hydrates

Clathrate compounds are crystalline materials formed by a physical interaction between host and relatively light guest molecules. Various types of nano-sized cages surrounded by host frameworks exist in the highly unique crystalline structures and free guest molecules are entrapped in an open host-guest network. Recently, we reported two peculiar phenomena, swapping and tuning, naturally occurring in the hydrate cages. Helium, one of the smallest light guest molecules, must be the challengeable material in the sense of physics and moreover possesses versatile applications in the field of superconductivity technology and thermonuclear industry. In this regard, we attempted for the first time to synthesize helium hydrates at moderate temperature and pressure conditions. According to inclusion phenomena, helium itself normally cannot form clathrate hydrates due to being too small molecularly without the help of hydrate former molecules (sI, sII, and sH formers). In this study, the hydrate equilibria of the binary clathrate hydrate containing tetrahydrofuran, helium, and water were determined at 2, 3, 5.56 THF mol%. Direct volumetric measurements were also carried out to confirm the exact amount of helium captured in the hydrate cages. Finally, the crystalline structure of the formed mixed hydrates was identified by powder X-ray diffraction, resulting in structure II.