Homogenization of hardness distribution and distortion in high pressure gas quenching

Quenching with gases rather than oil or other liquid media has the advantages of reducing the risks concerning health and environment, while simultaneously homogenizing the quenching results and minimizing distortion due to a wide range of possible process parameter variations and the pure convective heat transfer. In this contribution, a coupled solution for increasing homogenization of quenching results within high pressure gas quenching will be presented. In the first stage, an experimental test facility was set up for flow investigations and in the second stage a numerical simulation model was generated. The numerical and experimental results of the flow through the chamber were compared for several boundary conditions. Finally, after complete verification of the simulation, the model may be used to assist in parameter variation for optimization of homogeneous high pressure gas quenching.     

发电机同轴励磁机电刷火花过大的原因及处理方法

本文对发电机同轴励磁机电刷火花过大的原因进行了分析．并针对这些原因提出了相应的处理办法。对规范励磁机的运行维护有很大的帮助。     

巷道最佳注浆加固时机的分析研究

对松散破碎以及软弱围岩巷道进行注浆加固巷道围岩时,注浆时机的选择对注浆效果具有很大的影响。有效地进行注浆加固的先决条件是浆液能够在围岩中均匀地流动渗透到一定范围,且注浆后能明显提高围岩强度和整体承载能力。在综合考虑围岩裂隙的发育程度、注浆加固体的强度、所需控制的围岩变形量及注浆工艺等因素的基础上,确定了最佳的注浆时机——滞后15d～25d。     

一种基于LS的天线阵方向图综合算法

采用一种基于最小二乘理论的算法对阵列天线进行方向图综合,仅对旁瓣峰值和主瓣电平进行处理,可以实现旁瓣和主瓣电平的同时控制,使天线阵方向图向期望方向变化.算法可以对等间距和不等间距天线阵进行综合,计算量也较小,所以具有很强的实用性,仿真结果验证了算法的有效性.     

Morphology of intermetallic compounds formed between lead-free Sn-Zn based solders and Cu substrates

The morphologies of intermetallic compounds formed between Sn-Zn based solders and Cu substrates were investigated in this study. The investigated solders were Sn-9Zn, Sn-8.55Zn-0.45Al, and Sn-8.55Zn-0.45Al-0.5Ag. The experimental results indicated that the Sn-9Zn solder formed Cu₅Zn₈ and CuZn₅ compounds on the Cu substrate, while the Al-containing solders formed the Al_4.2Cu_3.2Zn_0.7 compound. The addition of Ag to the Sn-8.55Zn-0.45Al solder resulted in the formation of the AgZn₃ compound at the interface between the Al_4.2Cu_3.2Zn_0.7 compound and the solder. Furthermore, it was found that the cooling rate of the specimen after soldering had an effect on the quantity of AgZn₃ compound formed at the interface. The AgZn₃ compound formed with an air-cooling condition exhibited a rougher surface and larger size than with a water-quenched condition. It was believed that the formation of the AgZn₃ compound at the interface occurs through heterogenous nucleation during solidification.     

A Practical Method to Derive Sample Temperature during Nonisothermal Coupled Thermogravimetry Analysis and Differential Scanning Calorimetry Experiments

Nonisothermal thermogravimetry differential scanning calorimetry (TG‐DSC) mounting is intensively used for the determination of kinetic parameters and reaction heat along the chemical transformation of a solid. Nevertheless, when tests are performed with heating rates as high as those encountered in industrial processes, e.g., several tens of K min^–1, there is great uncertainty in the knowledge of the exact sample temperature. In this work, a method to derive a simple mathematical expression is proposed and fully described in order to calculate the real sample temperature throughout a temperature‐ramped test on a commercial apparatus. The furnace temperature and the heat flow signals were used, together with the crucible specific heat and the heating rate. A number of validation tests were performed to derive similar reaction rates for a reference. First‐order kinetic reactions were presented and reconciled over a large range of heating rates from 3 to 50 K min^–1.     

与商业比肩而行

“许多美术行为都是与商业客户相结合的。以商业的视角看待作品更重视在整个概念部分是不是能够从设计的观点很忠实地传达出商业诉求，并引起更大共鸣”。[编者按]     

新疆天然气产业发展思路研究

一 天然气产业发展现状 1、天然气资源勘探开发 最新评价结果表明，新疆三大盆地天然气资源量是10.42万亿立方米，其中塔里木7．96万亿立方米，准噶尔2．09万亿立方米，吐哈0.37万亿立方水．目前资源探明率为7％，说明新疆三大盆地依然具有较大的勘探潜力．是我国天然气重要的战略接替区。