不同添加剂对SrAl2O4:(Eu,Dy)磷光体发光性能的影响

在较低的温度下用燃烧合成法快速合成了 Eu2 ,Dy3 掺杂的SrAl2O4长余辉磷光体发光材料.研究了P2O5,CaF2,H3BO3,NaF 几种添加剂对SrAl2O4:(Eu,Dy)粉体发光性能的影响.结果发现:H3BO3和P2O5的添加有利于改善磷光体的发光性能,而在配料中加入CaF2和NaF,磷光体发光效率降低.随着这几种添加剂的加入,SrAl2O4:(Eu,Dy)磷光体材料发射光谱的主发射峰不同程度的出现蓝移.根据实验结果分析了添加剂的作用机理.     

三烷基氧膦络合萃取一元有机羧酸

络合萃取法对极性有机物稀溶液的分离具有高效性和高选择性。选择甲酸、乙酸、丙酸、丁酸为分离对象 ,三烷基氧膦 (TRPO)为络合剂 ,煤油为稀释剂 ,进行了系统的萃取相平衡实验 ,测定了络合剂浓度、稀释剂组成等因素对萃取平衡分配系数的影响。实验结果表明 ,溶质的亲油性对络合萃取平衡影响起主导作用 ;随TRPO浓度增大 ,萃取平衡分配系数呈增大趋势 ;随溶质初始浓度增大 ,有机相的溶质浓度向饱和萃取量接近 ;饱和萃取量随络合剂浓度的增大而增大。对相平衡分配系数进行拟合 ,精度令人满意。     

模具对振动注射成型制件作用效应的初步研究

采用自制的振动试验台，分别安装两个不同的试样模具，使用了不同的聚合物材料，在不同的温度，压力下变化不同的振动频率和振幅进行实验，研究了聚合物熔体在振动场中注射成型时，成型模具对聚合物振动成型效应的作用。结果表明，模具浇口及型腔尺寸不同。振动注射制件的强度不同；模具型腔尺寸大振动产生的效应弱。型腔小振动产生的效应强。     

A novel cyclodextrin-derived tellurium compound with glutathione peroxidase activity

A novel dicyclodextrinyl ditelluride (2-TeCD) compound was devised as a functional mimic of the glutathione peroxidase (GPX) enzymes that normally remove hydroperoxides from the cell. The GPX activity of the mimic was found to be 46.7 U microM(-1), which is 46 times as active as Ebselen, a well-known GPX mimic. A detailed steady-state kinetic study was undertaken to probe the reason for the high catalytic efficiency of 2-TeCD. This high efficiency can be explained based on both the binding of the substrate to the cyclodextrin and the catalytic mechanism of 2-TeCD, which is different from that of diselenide compounds. 2-TeCD exhibits good water solubility and is chemically and biologically stable. The biological effect of 2-TeCD was evaluated by its ability to protect mitochondria from oxidative damage. 2-TeCD exhibited excellent antioxidant capacity in comparison with Ebselen.     

Morphologic study of electrochemically formed lead dioxide

Various electrochemical methods with different conditions were used to prepare lead dioxide (PbO₂). The observation revealed that the morphology of deposited PbO₂ could be controlled by simply changing deposition parameters. Under the condition of oxygen evolution, which dominates the electrode process, uniformly distributed high porous structured PbO₂ was formed. The results indicated that large current density or high potential polarization should be one of the most important and necessary factors for forming high surface area PbO₂ deposit. Only β-PbO₂ was identified by X-ray diffraction measurement for the deposit prepared by present methods and solution. One potential application of this method is to prepare nanoscaled PbO₂ parallel lines.     

Synthesis and characterization of thermosensitive composite microsphere latex

Monodisperse aqueous latex dispersions, prepared from mixtures of styrene, N‐isopropylacrylamide, and N,N′‐methylenebisacrylamide, were characterized. Thermosensitive composite microspheres with diameters greater than 1.0 μm, consisting of a polystyrene core and a poly(N‐isopropylacrylamide) shell, were prepared. The morphology of the composite microspheres was observed with transmission electron microscopy, and the particle size of the composite microspheres was estimated with dynamic light scattering. The thermosensitive properties of the composite microspheres were evaluated via the hydrodynamic size of the composite microspheres. The particle size of the composite microspheres decreased with increasing temperature. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 824–828, 2005     

Hydrothermal synthesis of flaky crystallized La2Ti2O7 for producing hydrogen from photocatalytic water splitting

Flaky monoclinic La₂Ti₂O₇ was prepared via a hydrothermal method based on the reaction of Ti(SO₄)₂ and La(NO₃)₃. Relative to the solid-state reaction sample, the flaky La₂Ti₂O₇ showed higher surface areas, much smaller crystal size and more efficient light absorption. All these factors led to the higher photoactivity to produce H₂ from water splitting under UV irradiation.     

纳米铟锡氧化物粉体的制备及表面改性

在水介质中通过化学共沉淀法制备了铟锡氧化物(ITO)粉体，利用表面处理剂对ITO颗粒进行表面包裹。采用X-射线衍射分析仪、透射电镜、红外光谱分析仪、差热分析仪等分析了该ITO的物相结构及表面形貌。结果表明，该ITO为锡掺杂的三氧化二铟晶体，经表面包裹后，成为粒径均匀、大小约为50nm、无团聚的纳米粒子。经静态沉淀法分析，该纳米粒子在有机物(MMA)中有良好的分散性。     

有机硅密封胶粘接聚烯烃材料的研究

研究了不同类型的有机硅密封胶对PE、PP材料的粘接性能,结果表明交联剂和界面因素是影响有机硅密封胶粘接性能的主要因素。根据研究结果设计合成自催化交联型有机硅密封胶和有机硅复合密封胶,并研究它们的性能。     

Study of a downward gas jet in a two–dimensional fluidized bed

The study of a downward gas jet was performed in a two–dimensional (2–D) fluidized bed of sand particles under conditions of minimum fluidization and at atmospheric pressure and room temperature. The jet shifted through a cyclic sequence of left–central–right–central–left positions. The probability of the left and right jets was 40% each, while the less stable central jet occurred only 20% of the time. Discrete probability distributions of jet presence for each of the three jet configurations and an overall distribution are presented. They show that jets are dominant along the external walls of the nozzle. The depth of the downward jet increased with air flowrate in agreement with the correlation from Massimilla and Russo (1973).