Ultrapyrolysis of automobile shredder residue

A fast pyrolysis (Ultrapyrolysis) process was employed to convert automobile shredder residue (ASR) into chemical products. Experiments were conducted at atmospheric pressure and temperatures between 700 and 850°C with residence times between 0.3 and 1.4 seconds. Pyrolysis products included 59 to 68 mass% solid residue, 13 to 23 mass% pyrolysis gas (dry) and 4 to 12 mass% pyrolytic water from a feed containing 39 mass% organic matter and 2 mass% moisture. No measurable amounts of liquid pyrolysis oil were produced. The five most abundant pyrolysis gases, in vol%, were CO (18–29), CO₂ (20–23), CH₄ (17–22), C₂H₄ (20–22) and C₃H₆ (1–11), accounting for more than 90% of the total volume. The use of a higher organic content ASR feed (58 mass%) resulted in less solid residue and more pyrolysis gas. However, no significant changes were noted in the composition of the pyrolysis gas.     

酰胺类除草剂对红小豆的安全性

针对当前红小豆农业生产中大量应用的酰胺类除草剂并丙草胺、并丙甲草胺，研究其对红小豆苗期的安全性。研究表明，在低温、土壤墒情好的条件下两种药剂均对红小豆不安全，主要表现在影响出苗率、抑制生长、根体积明显减少、真叶叶片皱缩扭曲、严重的叶缘开始发黄、根瘤减少、逐渐枯死。两种药剂药害程度相近、随剂量增加症状明显加重，高用量时拱土期施药比播后立即施药的药害相对较轻，随有机质含量的降低而药害加重。     

湿塑性水泥土增强研究

从水泥在水泥-水-粘土系统中水化的特点出发，阐述了湿塑性水泥土的强度形成过程，主要是依赖于水泥石的强度骨架与粘土之间的结构连接。通过实验，研究了几种外加剂对湿塑性水泥土的增强作用及其增强机理，结果表明，外加剂能改善水泥土的水化介质环境和结构粘接，可改善水泥土的稠度和强度。     

二氧化碳催化加氢研究进展

介绍了近年来由 CO2 催化加氢制取甲醇、烃类、醛类、甲酸和二甲醚等反应的研究进展     

Effects of the solvent polarity on the atom transfer radical polymerization of methyl methacrylate initiated by 4‐(chloromethyl)phenyltrimethoxysilane

The controllability of the atom transfer radical polymerization of methyl methacrylate in the polar solvent N,N‐dimethylformamide and the nonpolar solvent xylene with 4‐(chloromethyl)phenyltrimethoxysilane as an initiator and with CuCl/2,2′‐bipyridine and CuCl/4,4′‐di(5‐nonyl)‐2,2′‐bipyridine as catalyst systems was studied. Gel permeation chromatography analysis established that in the nonpolar solvent xylene, much better control of the molecular weight and polydispersity of poly(methyl methacrylate) was achieved with the CuCl/4,4′‐di(5‐nonyl)‐2,2′‐bipyridine catalyst system than with the CuCl/2,2′‐bipyridine as catalyst system. In the polar solvent N,N‐dimethylformamide, unlike in xylene, the polymerization was more controllable with the CuCl/2,2′‐bipyridine catalyst system than with the CuCl/4,4′‐di(5‐nonyl)‐2,2′‐bipyridine catalyst system. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2751–2754, 2007     

Effects of the boundary layer and interfacial reaction on the time lag in supported liquid membranes

A mathematical model is proposed to describe the effects of boundary layer resistance and interfacial reaction on the time lag in supported liquid membranes for metal ion separation. The model shows that the presence of boundary layer resistance and interfacial reaction delays the time-lag, compared with the limiting case that rapid equilibrium at the interfaces and negligible boundary layer resistance are assumed. Calculated result describes the expected trend and the model equation allows one to predict the lumped parameters which represent the ratios of the diffusion time in the membrane to the characteristic time for boundary layer transfer and interfacial reactions.     

Vibrational spectroscopic characterization of rigid rod polymers: 3. Microstructural changes in stressed polymers

Highly oriented poly(p-phenylene benzobisthiazole) films were stressed in a miniature hydraulic tensile tester interfaced to a fast scanning Fourier transform infra-red spectrometer. The changes in relative intensity, polarization, frequency and shape of infrared bands have been useful in the elucidation of microstructures. With the short time resolution achievable, vibrational bandshape and frequency have been shown to change at different rates when an external stress was applied.     

用固体核磁技术分析PE 100管材料的抗熔垂性

用固体核磁技术分析了2种具有不同抗熔垂性能的聚乙烯管材料的凝聚态结构与流变性能。管材树脂的抗熔垂性能与其核磁迟豫特性紧密相关,好的抗熔垂性能对应更长的纵向迟豫时间。抗熔垂性能好的双峰管材料的重均分子量更高,高相对分子质量部分的含量更多。     

非临氢降凝催化剂的研制与评价

以ZSM-5为主体，加入一定量的自制BCM沸石，采用水热合成法合成新型非临氢降凝催化剂。以催化裂化柴油和减一线馏分油为原料对其反应性能进行评价。结果表明, 该催化剂具有明显的降凝效果。当反应温度为340 ℃、空速为1 h^-1时，凝点降幅为45 ℃左右，液体产品收率均在95%以上。所生产的柴油十六烷值高，硫、氮含量低，凝点低，基本满足了产品调合出厂的质量要求。     

外消旋螺环二酮的合成工艺条件研究

详细研究了以己二酸、溴代丁酸乙酯为原料，采用简便高效的方法制备外消旋螺环二酮的最佳条件和有关工艺。