机床的静压系统及润滑

对机床的静压系统及其发展过程进行了综述 ,介绍了静压系统的基本结构、特点及其在机床中的各种运用。     

辅锅控制程序在CENTUM-CS上的实现

全面介绍辅锅点火系统，从硬件配置、安全条件、点火逻辑和软件组态等几个方面论述辅锅控制程序的原理及其在CENTUM—CS上的实现方法，对CS系统的进一步开发利用具有较大的启发和借鉴作用。     

库岸边坡变形场与水分场光纤监测技术研究

三峡库区滑坡灾害频发,采用高效的滑坡监测技术对预防和降低滑坡灾害十分重要。本文介绍了ROTDR(Raman Optical Time-Domain Reflectometry)、BOTDR(Brillouin Optical Time-Domain Reflectometry)和FBG(Fiber Bragg Grating)这3种光纤感测技术,以及课题组基于这3种技术研发的滑坡体变形场与水分场监测技术。以三峡马家沟I号库岸滑坡为例,介绍了相关的DFOS(Distributed Fiber Optic Sensing)监测方案、传感器布设工艺、光纤的保护方法和部分水分场及变形场监测结果的分析成果。监测结果表明:DFOS技术应用于库岸滑坡变形场和水分场监测可行,可为研究库岸滑坡演化机理及其预警预报提供一个新的监测手段。     

溴素法α-溴代间氯苯丙酮合成研究

在金属卤化物催化剂 HD2 0 0 1存在下 ,溴与间氯苯丙酮在乙酸中反应得到盐酸安非他酮中间体 α-溴代间氯苯丙酮。最佳反应条件是 :n(间氯苯丙酮 )∶n(溴 ) =1∶ 1 ,催化剂用量为 1 %(质量分数 ) ,溴滴加时间为 1 h,反应温度为 1 0°C,此条件下 ,产物纯度为 98.83%,收率为 96.1 %。     

氧化焰烧成铜红釉

本研究以SiC作还原剂，采用氧化焰烧成，试制成功了在1250～1260℃下烧成的铜红釉，克服了传统的还原焙烧成方法的不足，简化了生产工艺，提高了铜红釉的成品率。     

聚丙烯塑料中二叔丁基过氧化物的测定

研究了在冰醋酸－盐酸介质中，以ＮａＩ作还原剂，Ｆｅ３＋作催化剂，测定二叔丁基过氧化物的条件，建立了在１００℃条件下催化碘量法测定二叔丁基过氧化物的新方法。该法用于聚丙烯塑料中微量过氧化物的测定，准确、可靠、方便。回收率为９８．７％，相对标准偏差为０．６４％。     

An EXAFS study on oxidic and sulfided K-MoO3/γ-Al2O3 catalysts

By analyzing the extended X-ray absorption fine structure (EXAFS) of the Mo K-absorption edge, structural information for both oxidic and sulfided K-MoO₃/-Al₂O₃ catalysts with different potassium content was obtained. The oxidic samples show two backscatterer peaks in the radial distribution function (RDF), which correspond to the Mo-O coordinations in the nearest Mo-O shell. The nearest oxygen atoms are present with large configurational disorder. The RDF for the K/Mo = 0 sample is significantly different from that for crystalline MoO₃ and ammonium heptamolybdate. The RDFs for potassium promoted samples are, in some extent, similar to that for ammonium heptamolybdate. The sample with K/Mo = 0.8 and that with K/Mo=1.5 do not show obvious difference in their local Mo-O structures. The EXAFS results support the earlier conclusions from Raman spectroscopy studies on identical samples [7]. When the samples are sulfided, a rearrangement of the local neighbors around Mo atoms takes place, to form small MoS₂-like crystallites. The Mo-S and Mo-Mo coordination distances on these catalysts are the same as those in crystalline MoS₂, but the coordination numbers are significantly lower than in MoS₂. The EXAFS results indicate that Mo species on the K/Mo=0 catalyst mainly consist of Mo-S-Mo units (the basic building units of MoS₂), which are highly dispersed and show a higher level of disorder than in MoS₂. With the modification by the potassium promoter, Mo species are significantly aggregated and their local neighbors are more similar to those in MoS₂, but the Mo species still exist in a state of high dispersion.     

Detecting video frame-rate up-conversion based on periodic properties of inter-frame similarity

Video frame-rate up-conversion is one of the common operations for tampering digital videos in the temporal domain, such as creating fake high-quality videos and splicing two video clips with different frame rates. However, few existing works have been proposed for detecting this form of tampering operation. Based on the analysis of extensive experiments, we found that frame-rate up-conversion algorithms employed in most current video editing softwares will inevitably introduce some periodic artifacts into inter-frame similarity in the resulting video frame sequence. By analyzing such artifacts, we propose a simple yet very effective method to expose video after frame-rate up-conversion, and further estimate its original frame rate. The experimental results evaluated on 100 original videos at different frame rates have shown the effectiveness of the proposed method. The average detection accuracy can achieve as high as 99 % on noise-free videos in uncompressed and H.264/AVC formats. Besides, the proposed method is robust to noise as the detection accuracy could reach over 85 % and 95 % on noised videos with Gaussian white noise when SNR is 33 db and 36 db respectively.     

氯化聚乙烯接枝马来酸酐胶粘剂的研究

本文介绍了改性聚丙烯（PP）基泡沫材料用的水溶性胶粘剂的研制。该胶粘剂不影响泡沫材料的阻燃性能和吸声性能，并有较好的热稳定性和储存性以及优化的耐水性。     

球磨效率探讨

主要讨论了球石的装载量、球石空隙率、球石级配、泥浆密度等因素对球磨效率的影响。运用正交试验优选了各因素。