冶金企业面临的严峻局面及今后工作重点

阐述了冶金企业在当前的严峻形势下，要求得生存必须转变传统观念。并提出“九五”期间的工作重点是：节能降耗、调整品种结构、提高生产率及加强决策管理。重点论述了实现节能降耗应抓好的四项工作：连铸坯一火成材与热装直轧，轧钢炉窑节能技术，轧机主传动交流调速技术及控制冷却技术。     

Characterization of wet microalgal cells pretreated with steam for lipid extraction

Steam pretreatment was employed to disrupt microalgal cells for lipids extraction.Effects of steam pre-treatment on microstructure of microalgal cells were investigated through scanning electron microscopy(SEM) and transmission electron microscopy (TEM).Effect of treatment on lipid extraction was also stud-ied.Microalgal cell walls were distorted after steam pretreatment due to the hydrolysis of organic macro-molecules contained in cell wall.Maximum curvature was increased from 1.88 × 10-6 m-1 to 1.43 × 10-7 m-1 after treatment with the steam at 130 ℃.The fractal dimension of microalgal cells increased from 1.25 to 1.30 after pretreatment for 15 min,and further increased to 1.47 when the pre-treatment time was increased to 60 min.Increased steam pretreatment temperature and time enhanced the hydrolysis of organic macromolecules,and finally destroyed microalgal cell walls at pretreatment temperature of 130 ℃ and pretreatment time of 60 min.Lipid extracted from wet microalgal was signif-icantly increased (2.1-fold) after pretreatment.     

A Strategy of Liquid-Grafted Slippery Sponges with Simultaneously Enhanced Absorption and Desorption Performances for Crude Oil Spill Remediation

Crude oil spill accidents pose a worldwide environmental threat. Oleophilic and hydrophobic absorbents that can selectively absorb oil from water have shown promising application potential in oil spill remediation. Simultaneous optimization of the absorption and desorption speed of absorbents towards oil is highly desirable for their recyclable usage, but remains a great challenge, because these two properties are generally conflicting. Here, a facile and ingenious strategy is proposed to tackle the above challenge via surface modification of porous sponges with highly flexible linear polydimethylsiloxane (LPDMS) brushes. The LPDMS brushes feature liquid-like properties at room temperature owing to its extremely low glass transition temperature, and act as a covalently-grafted lubrication layer throughout the 3D network channels of the sponge, which can minimize contact angle hysteresis and reduce friction between oil and sponge channel. Compared to the prevalent cross-linked polydimethylsiloxane (CPDMS) modification strategy, sponges modified with LPDMS brushes not only shows significantly enhanced absorption speed, but also exhibits superior desorption dynamics towards viscous crude oils. The design strategy of slippery sponges with liquid-like molecules may open a new avenue for developing advanced absorbents with simultaneously enhanced absorption and desorption performances for liquid separation and purification applications.     

Effects of surfactant and particle size on the microstructure and strength of Si3N4 foams with high porosity

The highly porous Si₃N₄ ceramic foams were prepared by direct foaming with mixed surfactants. The surface tension and viscosity of slurries were tailored by different carbon chain length of surfactants and different mean Si₃N₄ particle size to achieve the pore size controlling. The nearly linear relationship between the pore size and the ratio of surface tension to viscosity was observed, which indicates that the pore size could be precisely tailored by the slurry properties. Si₃N₄ ceramic foams with porosity of nearly 94%, mean pore size of 110–230 µm, and compressive strength of 1.24–3.51 MPa were obtained.     

Microstructure and properties of WC-8Co cemented carbides prepared by multiple spark plasma sintering

In this study, WC-8Co cemented carbides were prepared by spark plasma sintering. When the samples sintered at 1300℃ were cooled to room temperature, the samples were sintered multiple times at 1250℃. The changes in microstructure and mechanical properties of WC-8Co cemented carbides prepared by multiple spark plasma sintering were studied. The hardness of cemented carbides increased in the first two sintering, reaching 16.5 GPa. However, the hardness decreased seriously in the last two sintering. The attenuation rates of hardness were 6.2% and 2.5% due to the abnormal coarse grains. Furthermore, the crack path along the grain boundary was almost straight, causing a decrease in the indentation fracture toughness of cemented carbides. Additionally, the grains of cemented carbides were abnormally coarsened, and the morphologies of grains became unstable due to multiple sintering.     

Adsorption Mechanism and Electrochemical Properties of Methyl Blue onto Magnetic CoxCu(1–x)Fe2O4 Nanoparticles Prepared via an Alcohol Solution of Nitrate Combustion and Calcination Process

Journal of Inorganic and Organometallic Polymers and Materials - Magnetic CoxCu(1–x)Fe2O4 nanoparticles were prepared via an alcohol solution of nitrate combustion and calcination process....     

甲醇合成塔用 150 mm SA387Gr22C12 钢板组织和力学性能

对 150 mm 厚 SA387Gr22C12 钢板( / % : 0．13 ～0．14C,0．09Si,0．55 ～0．56Mn,0．004P,0．001S,2．48 ～2． 49Cr,1．11～1．12Mo) 模拟焊后拉伸性能、－29 ℃ 冲击性能、金相组织及回火脆化倾向评定等进行试验,并检测了交货态(正火 + 回火) 、最小模拟焊后态、最大模拟焊后态及步冷试验后的钢板各项性能指标 。结果表明,钢板的回火脆化 倾向不明显,其结果 CvTr55 + 2．5ΔCvTr55 为－63 ℃,完全满足甲醇合成塔用钢板的技术要求。     

水压环形缝隙泄漏量的试验研究

在水压系统环形缝隙泄漏试验基础上，对圆柱形配合状态下的缝隙泄漏量进行了理论和试验对比研究，分析了两者的变化规律。得出的结果可以为水压元件的设计提供试验依据。     

MICROSTRUCTURES AND TEXTURES IN COLD-ROLLED ALUMINIUM STRIP

ＭＩＣＲＯＳＴＲＵＣＴＵＲＥＳＡＮＤＴＥＸＴＵＲＥＳＩＮＣＯＬＤＲＯＬＬＥＤＡＬＵＭＩＮＩＵＭＳＴＲＩＰ①ＮｉｅＺｕｏｒｅｎ，ＺｈａｎｇＸｉｎｍｉｎｇ，ＹｉｎＺｈｉｍｉｎＤｅｐａｒｔｍｅｎｔｏｆＭａｔｅｒｉａｌｓＳｃｉｅｎｃｅａｎｄＥｎｇｉｎｅｒｉ...     

热爆合成－热挤压TiNi棒材的组织结构和性能

研究了热爆合成－热挤压法制得的ＴｉＮｉ合金棒材的组织结构和性能。研究结果表明，所制取的棒材具有用传统法——熔铸法生产ＴｉＮｉ合金的性能，证明了用该法制取ＴｉＮｉ型材的途径是可行的