AA/AAm改性的PVF高速粘贴标签胶粘剂的研制

采用AA/AAm改性PVF的方法制备高速粘贴标签胶粘剂。对PVA用量、聚合反应温度、引发剂、pH值、AA/AAm等对胶粘剂性能的影响进行了研究。结果表明 ,这些因素对胶粘剂的粘度、稳定性、干燥速度和粘贴强度有很大的影响。该胶粘剂有较好的粘贴性能 ,适用于 14 0 0 0 -2 80 0 0支 /小时高速啤酒生产线粘贴标签     

Packed bed electrodes. I. The electrochemical extraction of copper ions from dilute aqueous solutions

A study has been made of the cathodic deposition of copper ions from flowing dilute aqueous solutions onto a packed bed of graphite. The electrodeposition reaction is mass transfer controlled and expressions are presented for the cathodic current as a function of time, solution flow rate and bed characteristics. These have been verified from potentiostatic experiments. The cathode current efficiency is shown to approach 100% and packed bed electrodes are shown to be an effective means of extracting or removing metal ions from dilute solutions.     

An evaluation of commercial nickel catalysts during hydrogenation of soybean oil

The activities of several commercial nickel catalysts were determined by measuring their activation energies. Among these catalysts, G95E, Resan 22, Nysosel 222 and 325, all with low activation energy, were more active than DM3 and G95H, which had higher activation energy. However, the less active catalysts increased the linoleate selectivity of soybean oil during hydrogenation. The yields of bothtrans isomers and winterized oil were higher for the more selectively hydrogenated oil catalyzed by the less active catalysts. In the sensory evaluation, the fractionated solid fat that contained moretrans isomers was lower in flavor scores than the fractionated liquid oil after hydrogenation and winterization of soybean oil.     

塔式旋转混凝土布料机的工况计算及配重调控分析

塔式旋转混凝土布料机是一种可高效输送混凝土的工程机械,被广泛用于混凝土浇筑。施工过程中,为减小其布料端悬臂力矩、保证其塔架的稳定性,需要随时根据其伸缩桁架的伸缩量来调节其配重块的位置。运用有限元ANSYS软件,分析了布料机在极限工况条件下的结构强度和最大合力矩,计算了19种不同工况下力矩、桁架伸缩量及配重调节距离之间的数值关系。在此基础上,利用MATLAB的拟合优化功能得出三者之间的函数关系并绘制三维曲线。研究结果为塔式旋转混凝土布料机的安全运行提供数据支持,同时为其后续的优化设计提供参考。     

An accelerated algorithm for full band electron–phonon scattering rate computation

Computing scattering rates of electrons and phonons stands at the core of studies of electron transport properties. In the high field regime, the interactions between all electron bands with all phonon bands need to be considered. This full band interaction implies a huge computational burden in calculating scattering rates. In this study, a new accelerated algorithm is presented for this task, which speeds up the computation by two orders of magnitude (100 times) and dramatically simplifies the coding. At the same time, it visually demonstrates the physical process of scattering more clearly.     

相位测量定位法在焦炉车辆上的应用与研究

文中通过测量载波相位进行定位的方法来解决焦炉车辆的定位问题，以达到无线定位的目的。并对定位的数学模型进行了详细的分析与论述。     

An NMR study of acid sites on chlorided alumina catalysts using trimethylphosphine as a probe

The MAS-NMR spectra of adsorbed trimethylphosphine (TMP) were used to determine the concentration of Brønsted and Lewis acid sites on pure and chlorinated-Al₂O₃ samples. Chlorination with CHCl₃,CCl₄ or AlCl₃ promoted the formation of Brønsted acid centers, which are characterized by the protonated adduct of TMP. This adduct has a³¹P chemical shift of ca. –3.8 ppm and a J_P–H scalar coupling of 517 Hz. Additional resonances in the –44 to –54 ppm range are attributed to Lewis acid-base pairs. In some cases a partially resolved J_P–Al coupling is observed, which confirms the assignment. Upon thermal treatment of a chlorinated sample at temperatures > 200°C, the concentration of Brønsted acid centers decreased; the concentration of one type of Lewis acid increased and another remained almost constant. In a parallel set of experiments the initial conversion ofn-hexane at 150°C and the yields of cracking and isomerization products were determined. Comparable functional relationships were observed between the loss of Brønsted acid sites and the decrease in yields of both cracking and isomerization products. These results suggest that Bransted acidity is responsible for the cracking and isomerization ofn-hexane over chlorided aluminas at 150°C.     

Recent studies of self-condensation and co-condensation of melamine-formaldehyde resins; cure at low temperatures

Self-condensation: recent research on the chemical pathways by which alcoholated melamine-formaldehyde (MF) resins react with themselves and on the product structures is summarized. Model compound studies suggest that bridges are less stable than widely thought unless they are in hexahydro-1,3,5-triazine ring structures. In acyclic structures they are probably less stable than bridges. Co-condensation: studies of how the composition of MF resins influences the rates of reaction with poly(ol) co-reactant show that MF resins that contain very low levels of and/or functionality are quite reactive. Reactivities of a variety of poly(ester) and acrylic coreactants were studied. By combining reactive MF resins with reactive co-reactants one can formulate high solids enamels that cure by co-condensation in 30 min at 50 to 65 °C with 0.5 parts per hundred (phr) of p-toluenesulfonic acid (p-TSA) catalyst. Cure at 25 °C appears feasible with higher catalyst levels.     

利用腈纶废丝合成絮凝剂PAN—DCD

本文以腈纶废丝为原料与双氰双胺在碱性溶液中反应，成功地制得含有多种活性基因的聚合物ＰＡＮ－ＤＣＤ，并用于染料废水脱色及炼油厂废水除油，除酚的处理研究，与常规使用的几种絮凝剂进行处理结果对照，实验结果表明：该产品单独使用处理效果明显优于其他絮凝剂，与聚铝复合使用处理效果更为理想。