Intelligent control of doubly‐fed induction generator systems using PIDNNs

An intelligent control for a stand‐alone doubly‐fed induction generator (DFIG) system using a proportional‐integral‐derivative neural network (PIDNN) is proposed in this study. This system can be applied as a stand‐alone power supply system or as the emergency power system when the electricity grid fails for all sub‐synchronous, synchronous, and super‐synchronous conditions. The rotor side converter is controlled using field‐oriented control to produce 3‐phase stator voltages with constant magnitude and frequency at different rotor speeds. Moreover, the grid side converter, which is also controlled using field‐oriented control, is primarily implemented to maintain the magnitude of the DC‐link voltage. Furthermore, the intelligent PIDNN controller is proposed for both the rotor and grid side converters to improve the transient and steady‐state responses of the DFIG system for different operating conditions. Both the network structure and online learning algorithm are introduced in detail. Finally, the feasibility of the proposed control scheme is verified through experimentation. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Hysteresis Compensation and Adaptive Controller Design for a Piezoceramic Actuator System in Atomic Force Microscopy

This paper presents an indirect adaptive controller combined with hysteresis compensation to achieve high accuracy positioning control of piezoceramic actuators and illustrates the results with an atomic force microscope (AFM) application. A dynamic model of a piezoceramic actuator system in AFM is derived and analyzed. A feedforward controller based on the Preisach model is proposed to compensate for the nonlinear hysteresis effects. Then an indirect adaptive controller is designed to achieve desired tracking performance as well as deal with the uncompensated nonlinearity from hysteresis and the system parameter variation due to creep. Experimental results indicate that the proposed controller can significantly improve the positioning control accuracy of the piezoceramic actuator as well as achieve high image quality of the AFM system. The maximum scanning error was reduced from 2µm to 0.3µm in comparison with a proportional‐integral‐derivative (PID) controller. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

太阳能帆板输出功率短期预测研究

在卫星观测中,经常由于各种原因导致短时间内无法提取目标卫星数据,使控制系统无法继续对其保持高精度跟踪和控制。文章主要研究ARIMA模型在卫星遥测数据短期预测中的应用。使用Matlab软件进行ARIMA模型参数计算,再使用SPSS软件执行数据预测,并进行残差分析,通过实例验证,短时期内的预测数据精度较高。     

基于多信号流模型的模型封装与解包技术

随着科技的快速发展,设备系统的复杂程度越来越高,多信号流模型是系统测试性分析的常用模型,为解决复杂系统建模分析时对其各分系统信息保密问题,提出了一种基于多信号流模型的模型封装与解包方法。该方法首先确定了封装模块数据信息并实现封装,然后构建封装模块测试信息描述表,描述了封装模块内部故障、内部测试与外部信息的关系以及封装模块本身对外部信息的影响,实现了模块的解包。实验表明,该描述方法可以有效地屏蔽了被封装的分系统模型的技术信息,有利于各分系统设计者之间的信息保密,同时利用该描述方法,还可以有效地减少测试性分析所需的时间。     

基于HH模型的心肌细胞电模型

提出了一种心肌细胞电生理模型的建模仿真方法。通过借助Hodgkin-Huxley模型对单个心肌细胞建立细胞膜的等效电路模型,利用四阶Rouge-Kutta算法,研究并分析了心肌细胞膜内外离子电流及电位差变化。然后用C语言完成了对细胞膜等效电路模型的编程,利用Matlab软件平台进行了计算机仿真,得到了心肌细胞电生理学模型在不同刺激下的仿真实验结果。     

GemstoneFire: adaptive dispersive ray tracing of polyhedrons

Synthesizing realistic images of gemstones requires techniques beyond the scope of normal ray tracing. The fire of such highly refractive objects is what makes gemstones attractive, and also imposes very high computational overhead to perform time consuming dispersive ray tracing. Gemstones are usually cut in polyhdrons as for example, a brillant cut. After a detailed analysis of the nature of dispersive ray tracing of polyhedral objects, we propose here a new method of using three simple rays adaptively to model the ray spreading caused by dispersive refraction. It is shown that the proposed method reduces the computational complexity to an order close to that of normal ray tracing.     

高温眼镜阀的创新研究与应用

转炉煤气干法除尘工艺是钢铁企业重要的节能降耗先进技术,眼镜阀是与之配套的关键设备,近年来,转炉煤气干法除尘工艺眼镜阀配置大部分采用从国外引进,费用高。文章基于TRIZ理论和方法,对转炉煤气干法除尘工艺眼镜阀进行了深入的研究,并在高温密封、液压控制、阀门自动复位等方面采用了新的方法。创新成果成功地应用于首钢京唐炼钢工程,促进了转炉煤气干法除尘工艺技术的推广。     

表面贴装过程仿真系统的研究与开发

文章从表面贴装技术(SMT)现状及特点开始,介绍多品种小批量电子产品中使用表面贴装技术存在的问题。针对这一情况对表面贴装过程仿真系统的需求进行了分析,并详细论述了仿真系统的文件预处理、仿真以及数据库维护三大主要模块设计,主要介绍采用OpenGL实现仿真模块的方法,同时展示仿真系统实现结果。最后总结了仿真系统的特点。     

均衡化特征匹配的非刚体细胞形态跟踪

提出利用均衡化特征匹配来进行非刚性细胞形体跟踪的方法。采用重启动的随机游走方法建立并求解特征匹配概率模型,利用双向均衡方法对匹配邻接矩阵进行均衡化处理,得到指定目标与待跟踪目标之间的精确匹配,以获得目标的定位跟踪结果。同时利用特征匹配结果进行目标的自动标定,并应用图像分割方法进行目标的精确轮廓跟踪。实验结果表明,将该方法应用于视频中动态背景下的运动细胞形态跟踪时,在背景相似度较高及目标迅速移动的条件下,表现出了良好的性能,与同类方法相比可获得较高的定位精度以及更为准确的目标轮廓。     

基于传感器网络节点配置优化仿真研究

研究无线传感网络节点配置覆盖优化问题。由于无线传感网络存在着热区问题,对网络的覆盖性能造成严重的影响,同时影响网络配置优化。为了有效的提高无线传感网络的覆盖率,提出了一种改进的粒子群算法优化无线网络节点覆盖。针对粒子群算法存在易陷入局部极值和早熟的缺陷,引入遗传算法中的交叉算子和变异算子,优化传感网络节点的混合粒子群算法,在严格确保无线传感器网络连通性的条件下,传感器节点配置数目达到要求的覆盖度,并进行仿真。仿真结果表明混合粒子群算法能快速收敛到更精确的解,使网络节点配置达到覆盖的优化要求。